Nanoscale Crystallization in the Amorphous Alloy Fe79P14.2Si4.4Mn2.2V0.2 upon Pulsed Photon Annealing

The effect of pulsed photon annealing with energy densities from 1.4 to 42 J/cm² for various lengths of time on the structure of the amorphous alloy Fe₇₉P_14.2Si_4.4Mn_2.2V_0.2 was studied by x-ray diffraction, differential scanning calorimetry, and transmission electron microscopy. The results demonstrate that short-term irradiation with low energy densities leads to surface relaxation of the amorphous alloy, increases the strength of the surface layer, and reduces the internal-friction peak. Longer term photon annealing leads to crystallization of the alloy throughout the sample thickness.     

Programmable group-delay module using binary polarization switching

We demonstrate the first programmable group-delay module based on polarization switching. With a unique binary tuning mechanism, the device can generate any differential group delay value from -45 to +45 ps with a resolution of 1.40 ps, or any true-time-delay value from 0 to 45 ps with a resolution of 0.7 ps. The delay varying speeds for both applications are under 1 ms and can be as fast as 0.1 ms. We evaluate both the dynamic and static performances of the device while paying special attention to its dynamic figures of merit for polarization-mode dispersion emulation and compensation applications. Our experiment shows that the device exhibits a negligible transient-effect induced power penalty (<0.2 dB) in a 10-Gb/s nonreturn-to-zero system.     

Long-wavelength infrared photoinduced switching of a resonanttunneling diode using the intersubband transition

Voltage switching induced by long-wavelength infrared light from a CO₂ laser was observed using a double-barrier resonant tunneling diode (RTD) biased in the bistable region and the intersubband transition (IT) between the quantum confined states. Possible optoelectronic and all-optical switching applications involving hysteresis are proposed and discussed     

Comparative Assessment of the Effect of Chemical and Radiation Factors on Workers and the General Public Resulting from the Salvaging of Nuclear-Powered Submarines

The results of observations performed over many years are used to make an assessment of the degree to which the concentration of chemical and radioactive substances escaping into the environment during salvaging of nuclear-powered submarines exceeds the admissable norms for workers at the main ship-repair facilities in Russia and for the general public in the surrounding territories. It is shown that the chemical substances are a determining factor in environmental contamination. Their content in the atmosphere and sea water exceeds the admissable norms near sources, on the territory of the enterprises, and (for individual indicators) at populated points. Under these conditions, the concentration of technogenic radionuclides does not exceed the admissable norms and its damaging effect on man is hundreds and thousands of times less than that of chemicals.     

Special Features of Fracture of Steels from Partially-Alloyed Powders

Special features of fracture of structural steels 45N2D2M and 45N4D2M manufactured by pressing with subsequent sintering from partially alloyed iron powders are studied. Impact bending tests of specimens with different levels of retained porosity show two kinds of fracture, i.e., intraparticle cleavage and interparticle dimple fracture. In addition, the surfaces of the “initial” pores come out to the fracture surface. Other conditions being equal, growth in porosity decreases the proportion of the brittle component of fracture and decreases the critical brittle point.     

Circular core polarization-maintaining optical fibers withelliptical stress-induced cladding

The reproducible technology for producing high-birefringence fibers with stress-induced elliptical cladding and circular core is described. The authors have obtained fibers that have a birefringence of about (1-3) 10^-4, a mode coupling parameter of about (2-7) 10 ^-5 m^-1, and loss of less than 0.5 dB/km at 1.6 μm. The authors have found effects restricting the capability of test fibers to maintain the state of linear polarization     

Low cycle fatigue and creep behavior of recrystallized Molybdenum near room termperature

The deformation behavior of pure recrystallized molybdenum under cyclic and static loads was investigated in the temperature range between 30°C and 10O°C, for stress amplitudes between 100 MPa and 250 MPa and for static loads up to 200 MPa. The results show that in spite of the low test temperatures and stress levels the Mo material exhibits considerable plastic strains which depend sensitively on frequenez and small changes in temperature.The activation energy deduced for the static and dynamic deformation is less than 0.98 eV which indicates thermally activated processes, to be explained by a dislocation kink model as described in the literature. The low-temperature fatigue behavior appears strongly influenced by creep-fatigue interaction phenomena.