A Shortcut Method for Estimating the HETP of Structured Packed Distillation Columns at Elevated Pressure

A shortcut model is developed for predicting the HETP of a structured packed distillation column operating at elevated pressure. The proposed model incorporates the geometrical parameters of the packing, physical properties of the vapor and liquid phases, and the hydrodynamics of the two‐phase flow. The proposed model is tested and validated by comparing the predicted results with the present experimental data and some published HETP data. The results show that the proposed model can predict the experimental data with a deviation smaller than 20 %.     

Monoalkyl Esters of Isoalkylphosphonic Acid as Extractants in Rare Earth Separation

Four monoalkyl esters of isoalkylphosphonic acids have been studied for the chromatographic separation ofrare earths (RE).The relationship between distribution ratios and acid concentration of the eluants forsamarium and ytterbium has been explored.The characteristics of these extractants loaded onto macroreticularpoly (methyl methacrylate) resin beads for the separation of lanthanum,cerium,praseodymium and neodymiumhave been compared.Among the extractants studied,mono(1-methylheptyl) ester of isooctylphosphonic acidwas found to be the best for RE separation.The acidity for separation is lower than any known P-containingextractants for the same purpose.For instance,with 1.73 mol·L~(-1) nitric acid as eluent,thulium,ytterbium andlutetium can be separated quantitatively.The extractant-loaded resins possess high column efficiency with goodkinetic characteristics.The extraction mechanism was also explored.     

SIDAC双向开关触发器的典型应用

详细介绍了SIDAC作为一种高压双向触发器的工作特点及其典型的应用电路。     

Photodegradation mechanism and stabilization of polyphenylene oxide and rigid‐rod polymers

Poly(2,4‐dimethyl‐1,4‐phenylene oxide) (PPO), poly(benzo[1,2‐d:5,4‐d′]bisoxazole‐2,6‐diyl‐1,4‐phenylene) (PBO) and poly(benzo[1,2‐d:4,5‐d′]bisthiazole‐2,6‐diyl‐1,4‐phenylene) (PBZT), which are polymers with extended conjugated structures, undergo a self‐sensitized photo‐induced electron‐transfer reaction. A second component is not required. This article presents many similar observations on these polymers when they are exposed to light and evidence to support the proposed photo‐induced electron‐transfer mechanism. Methods to stabilize these polymers against photo‐oxidation are also described. Workers investigating other conjugated polymeric systems may find the experimental methods, observations and polymer stabilization approaches discussed in this review useful. Copyright © 2005 Society of Chemical Industry     

Application of artificial neural networks to the analysis of two‐dimensional fluorescence spectra in recombinant E coli fermentation processes

A two‐dimensional (2D) spectrofluorometer was used to monitor various fermentation processes with recombinant E coli for the production of 5‐aminolevulinic acid (ALA). The whole fluorescence spectral data obtained during a process were analyzed using artificial neural networks, ie self‐organizing map (SOM) and feedforward backpropagation neural network (BPNN). The SOM‐based classification of the whole spectral data has made it possible to qualitatively associate some process parameters with the normalized weights and variances, and to select some useful combinations of excitation and emission wavelengths. Based on the classified fluorescence spectra a supervised BPNN algorithm was used to predict some of the process parameters. It was also shown that the BPNN models could elucidate some sections of the process's performance, eg forecasting the process's performance. Copyright © 2005 Society of Chemical Industry     

A comparison of lightness contrast effects in CRT and surface colours

The simultaneous contrast effect is investigated in this article. A total of 174 and 154 test/induction combinations were studied for CRT and surface colours respectively. Each combination was assessed by nine observers using a matching technique. The test and induction colours used for CRT colours were similar to surface colours using fabric samples. The results indicated a strong lightness contrast effect for both CRT and surface media; that is, the lightness of a test colour surrounded by a lighter induction colour was reduced for both CRT and surface colours. However, the effect in CRT medium was more pronounced than in the surface medium. © 2004 Wiley Periodicals, Inc. Col Res Appl, 30, 13–20, 2005; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/col.20074     

CFD Simulation of Liquid Film Flow on Inclined Plates

A two‐phase flow CFD model using the volume of fluid (VOF) method is presented for predicting the hydrodynamics of falling film flow on inclined plates, corresponding to the surface texture of structured packing. Using the proposed CFD model the influence of the solid surface microstructure, liquid properties and gas flow rate on the flow behavior was investigated. From the simulated results it was shown that under the condition of no gas flow the liquid flow patterns are dependent on the microstructure of the plates, and proper microstructuring of the solid surface will improve the formation of a continuous liquid film. It was also found that liquid properties, especially surface tension, play an important role in determining the thin‐film pattern. However, there are very different liquid film patterns under the action of gas flow. Thinner liquid films break easily, but thicker liquid films can remain continuous even at higher gas flow rates, which demonstrates that all factors affecting the liquid film thickness will affect the liquid film patterns under conditions of counter‐current two‐phase flow.     

Wasserstofffreie amorphe Kohlenstoffschichten ‐ abgeschieden durch plasmaaktivierte Hochratebedampfung

Hydrogen free amorphous carbon coatings ‐ deposited with plasma‐activated high‐rate evaporation By using the technology of the plasmaactivated electron beam evaporation we deposited hydrogen free amorphous carbon coatings with deposition rates of up to 100 μm/h. The results of the mechanical and tribological investigations show the potential of these layers for the use in case of wear resistance. Hardnesses of up to 16GPa were proved. The actual state of the characterisation of the coatings is described and the outlook onto possibilities of further optimisation is given.     

Heliumlecktestgeräte für die Qualitätsprüfung von Gehäusen für Vakuumverdichter

Helium leak test devices for the quality inspection of housings for vacuum compressors The well‐known and wide‐spread helium leak test method is a safe and fast quality testing method for construction units of any kind. Due to its safe examination and the short time of examination it is predominantly inserted into automated production lines as e.g. in the automobile supporting industry up to the examination by Airbags and rims of wheel. Likewise in addition, for the construction units, machines and devices of the vacuum engineering. From this the demand results simple and in particular economical devices for the helium leak test of construction units with small numbers of items of under 200 pieces per day. For these manufacturing profiles economical ways for the helium leak test are pointed out.