淀积条件对GDa—SiNx薄膜电学特性的影响

本文讨论了用辉光放电法制备氮化硅薄膜时衬底温度、射频功率和气体流量比对薄膜的电导率、介电常数和击穿强度的影响。通过优化生长条件，制备了优质非晶氮化硅薄膜，其介电常数为７．５、击穿强度为５．５ＭＶ／ｃｍ、电导率为１０－１３（Ωｃｍ）－１。     

The use of doped polyaniline as an electrode in the galvanic anodic protection of ferrous metals in industrial acid solutions

In order to investigate the galvanic anodic protection (GAP) of ferrous metals (such as 410, 304 and 316 stainless steels) in acid solutions by doped polyaniline (PANi), separate doped PANi powder-pressed electrodes with different surface areas (the area ratio of the PANi electrode to stainless steel is between 1:1 and 1:2) have been prepared. These were coupled with ferrous metal in the following solutions: 5 M sulphuric acid, 5 M phosphoric acid and industrial phosphoric acid (containing 5 M phosphoric acid and 0.05% chloride ion) to construct a galvanic cell, in which PANi is cathode while ferrous metal is anode. The results indicate that a PANi electrode with sufficient area can provide corrosion protection to stainless steel in these acidic solutions. A pilot scale coupling experiment was carried out. The results indicate that PANi is a promising material as an electrode for the anodic protection of ferrous metals in acidic solutions in industrial situations.     

β放射性气体浓度计的新分度方法

本文介绍β放射性气体浓度计的一种新的分度方法——泄漏元件排气法。其特点是一只元件可分度放射性气体浓度计的许多读出数(甚至是几个量程),操作方便。     

Access-mode predictions for low-power cache design

An access-mode prediction technique based on cache hit and miss speculation for cache design-achieves minimal energy consumption. Using this method, cache accesses can be adaptively switched between the way-prediction and the phased accessing modes.     

Flammability and thermal stability studies of ABS/Montmorillonite nanocomposite

Acrylonitrile–butadiene–styrene (ABS)/montmorillonite nanocomposites have been prepared using a direct melt intercalation technique by blending ABS and organophilic clay of two different particle sizes: OMTa (5 µm) and OMTb (38 µm). Their structure and flammability properties were characterized by X‐ray diffraction, high resolution electronic microscopy (HREM), thermogravimetric analysis (TGA) and cone calorimeter experiments. The results of HREM showed that ABS/5 wt% OMTa nanocomposite was a kind of intercalated–delaminated structure, while ABS/5 wt% OMTb nanocomposite was mainly an intercalated structure. The nanocomposites showed a lower heat release rate peak and higher thermal stability than the original ABS by TGA and cone calorimeter experiments. Also, the intercalated nanocomposite was more effective than an exfoliated–intercalated nanocomposite in fire retardancy. Copyright © 2003 Society of Chemical Industry     

MOS RF reliability subject to dynamic voltage stress-modeling and analysis

Dynamic stress on MOSFETs with 900-MHz inverter-like waveforms as well as static (or dc) stress were evaluated experimentally. It showed that the degradation due to dynamic stress is less than that of dc stress for our test transistors. A compact model is used to evaluate the degradation in radio frequency performances, such as transconductance, cutoff frequency, linearity, and noise figure. A class-AB power amplifier is presented as an example to demonstrate the effect of dynamic stress on RF circuit performance.     

Response of simulated propellant and explosives to projectile impact—II. Fragmentation

This paper is the second of a series concerned with the penetration and perforation phenomena in two types of propellant and explosive simulant, named Propergol, due to the impact at normal incidence of both blunt and conically-tipped steel strikers. The collision results in fragmentation, plug formation and generation of a cloud of debris that includes particles of measurable dimensions traveling with significant velocities. Both the fragment size and area as well as the ejecta mass are determined experimentally as a function of Propergol specimen thickness and impact velocity or energy. The cumulative number of fragments as a function of size for the Propergol is uniformly found to be a bi-linear semi-logarithmic relationship with the bifurcation occurring at the mean crystal radius. Individual crystals and the crater generated are examined by means of a scanning electron microscope.

A phenomenological model of the fragmentation process is constructed, based on an assumed spherical shape of the fragments and the bi-linear fragment distribution, using energy methods. This is combined with a perforation analysis that considers the process to be sequentially composed of initial indentation, fragmentation, and sliding and deflection of the Propergol disks. An evaluation of this model providing fragment volumes as a function of impact velocity is compared with experimental results and found to be in good agreement.     

艰难兴大业踏雪寻梅来——访香港著名企业家沈家燊

序：“为什么我的眼里常含泪水，因为我对这土地爱的深沉。”每次读到艾青的这句诗，我都攀不住在想诗人到底有着怎样的情节．而这情节又是怎棒化成澎湃的激情？当面对沈家柴先生那闪烁着光芒，自信、执着、激情四射的眼神时，我缝于找到了答案：正是对一个国家、一座城市拥有了不移信念、不倦热情、不衰挚爱，他才有了面对错综复杂矛盾时的坦荡胸怀，才会有了风雨兼程的无怨无悔。沈家集为这句诗做出了最生动的逄释，他以自己的方式在津洁大地上刻写着人生的价值，他将心和力奉献给了天津。     

Nd3+ Doped Silicate Glass Photonic Crystal Fiber with Random Hole Distributions

The fabrication of one kind of large core area Nd3 doped silicate glass photonic crystal fiber, and demonstration of the fiber's waveguidence properties were reported. This fiber owns a random air hole distribution in the cladding. The measured minimum loss of this kind of fiber is 10 dB·m-1 at 660 nm. These fibers can sustain only a single mode at least over wavelength ranging from 660 nm to 980 nm.