Performance of Sewage Sludge Treatment and Electricity Generation by Different Configuration Microbial Fuel Cells

This paper compared the degradation efficiency of sludge organic matters and electric-production by two typical microbial fuel cells——dual-chamber microbial fuel cell(DMFC)and single chamber air cathode microbial fuel cell(SAMFC),and the variations of sludge protein,polysaccharide and ammonia nitrogen within the systems were also investigated.The results showed that the concentration of sludge soluble chemical oxygen demand,protein and carbohydrate of DMFC are higher than these of SAMFC during the systems operation,while DMFC can achieve a better ammonia nitrogen removal than SAMFC.Under the same operation condition,the stable voltage output of DMFC and SAMFC is 0.61 V and 0.37 V;the maximum power density of DMFC and SAMFC is 2.79 W/m3and 1.25 W/m3;TCOD removal efficiency of DMFC and SAMFC is 34.14%and 28.63%for 12 d,respectively.Meanwhile,DMFC has a higher coulomb efficiency than SAMFC,but both are less than5%.The results showed that DMFC present a better performance on sludge degradation and electric-production.     

The oxidation state of sulfur detected in Na2O-CaO-SiO2 float glass by X-ray absorption near edge structure spectra

The oxidation state of sulfur is detected in Na2O-CaO-SiO2 float glass by synchrotron radiation X-ray absorption near edge structure (XANES) spectra at the sulfur K edge. The measured spectra show the only presence of S6+ in the Na2O-CaO-SiO2 float glass and the oxidation state of sulfur do not change with the increase of glass depth. It is also found that, after the melt has gone through the molten tin bath, the S6+ is the dominant species, but S2- is also present on both surfaces. It is not certain whether cation bonds to S2- or not, because there are many cations dissolved in the melted tin which makes the spectrum complicated.     

改性高岭土上甲苯的选择性硝化(IV)

应用Ｍｅｎｋｅ条件，在改性高岭土固体酸催化下，甲苯能被浓硝酸对位选择性硝化，表现在对邻硝化产物比例达到１．５。     

Grigorii Valentinovich Samsonov

Obituaries

Grigorii Valentinovich Samsonov     

X-ray photoelectron spectroscopy characterization of the interface between Ag electrode and PVDF film treated by electric poling

Interface changes induced by electric poling treatment between an Ag electrode deposited by vacuum thermal evaporation and a polymer thin film have been investigated. The polymer film poly (vinylidene fluoride) (PVDF), a fluoropolymer of repeat unit (–CH₂–CF₂–) was treated under electric poling at high temperature of 90°C. The characterization was accomplished using X-ray photoelectron spectroscopy (XPS) as a primary tool. The results indicate that the piezoelectricity of PVDF thin films and adhesion force between polymer thin film and metallic electrode are improved by electric poling and chemical bond joint.     

基于家庭的DV节目制作

利用普通计算机设备,通过系统规划、选择恰当的编辑软件、采用合理的编辑步骤与技巧,把握制作规律、就能制作出高质量的家庭纪念光盘.     

A Continuum Mechanics Approach for Crack Initiation and Crack Growth Predictions

Very often, different approaches are used for crack initiation and crack growth predictions. The current article introduces a recently developed approach that can be used for the predictions of both crack initiation and crack propagation. A basic assumption is that both crack nucleation and crack growth are governed by the same fatigue damage mechanisms and a single fatigue damage criterion can model both stages. A rule is that any material point fails to form a fresh crack if the total accumulated fatigue damage reaches a limit. For crack initiation predictions, the stresses and strains are obtained either directly from experiments or though a numerical analysis. For the prediction of crack growth, the approach consists of two steps. Elastic‐plastic stress analysis is conducted to obtain the detailed stress‐strain responses. A general fatigue criterion is used to predict fatigue crack growth. Compact specimens made of 1070 steel were experimentally tested under constant amplitude loading with different R‐ratios and the overloading influence. The capability of the approach to predict both crack initiation and the crack growth under these loading conditions was demonstrated by comparing the predictions with the experimental observations.