Effect of sulfate on Cu(Ⅱ) sorption to polymer-supported nano-hydrated ferric oxides: Experimental and modeling studies

Incorporating of hydrous ferric oxide(HFO) inside porous supports with large sizes has become an effective way to decontaminate the water from heavy metals. Ubiquitous anions like sulfate are usually present in high concentrations in water, and might greatly affect adsorption behavior of hybrid HFO. Here, a polymer-based HFO-CPS was fabricated by encapsulating nano-HFO inside a chloromethylated polystyrene polymer(CPS) and the reactivity of HFO-CPS with Cu(Ⅱ) was evaluated in the presence of sulfate ions.Surface complexation theory was firstly employed to describe the effect of sulfate on Cu(Ⅱ) adsorption edges of hybrid HFO-CPS, where constant capacitance model(CCM) was adopted. The available weak adsorption site Fe_((2))OH of hybrid HFO-CPS was found to decrease from 20% Fe to 5% Fe, which might be caused by the pore plugging effect after HFO encapsulation. With the assumption that a ternary complex was formed, the effect of sulfate on Cu(Ⅱ) adsorption by HFO-CPS were successfully described by CCM using the optimized Fe_((2))OH site under different sulfate concentrations(1 or 10 mmol·L~(-1)) and Cu/Fe ratios(0.0042 or 0.0252). It is confirmed that the formation of Fe OHCu SO_4 ternary surface complexes played an important role in enhancing Cu(Ⅱ) adsorption on HFO-CPS in the presence of sulfate.     

ZrO2制备方法研究进展

以ZrO₂为活性组分或载体的催化剂,在酚类定向催化转化中具有较高的研究价值。总结了ZrO₂的各种制备方法,包括溶胶-凝胶法、共沉淀法、水热法、表面活性剂辅助法、静电纺丝法、热解法、多元醇还原法、反相微乳法和超临界合成法等。阐述了各种方法的反应原理,详细比较了不同制备方法的优劣,并具体分析了制备方法对催化剂结构及性能的影响。     

Preparation of High Strength and Toughness Aramid Fiber by Introducing Flexible Asymmetric Monomer to Construct Misplaced-Nunchaku Structure

High performance fibers with high strength and toughness have great potential in composites, but contradiction between tensile strength and elongation at break makes the preparation to become a current challenge. Herein, an asymmetric structure of more flexible diamine, 3,4′-diaminodiphenyl ether (3,4′-ODA), is introduced into heterocyclic aramid (PBIA) fibers to replace rigid symmetric p-phenylenediamine (PDA). By studying the properties of copolymer (mPEBA) fibers with different ratios of diamine, it is found that the mPEBA fiber reached the optimal mechanical properties with the 30% content of 3,4′-ODA. Compared with homopolymerized heterocyclic aramid fibers, the tensile strength and elongation at break of mPEBA fiber are improved by 26.2% and 38.7%, respectively. Results of X-ray diffraction show that the introduction of 3,4′-ODA structure can increase stretchability of mPEBA fibers, improving the orientation degree during hot-drawing. Molecular dynamics simulations confirm that 3,4′-ODA structure undergoes a conformation transformation to form a straightened chain during hot-drawing, while symmetrical 4,4′-diaminodiphenyl ether (4,4′-ODA) cannot form the same conformation. The misplaced-nunchaku structure is formed based on the special meta-para position of 3,4′-ODA, achieving the synergy of high strength and high toughness.     

Room-Temperature Solid-State Lithium Metal Batteries Using Metal Organic Framework Composited Comb-Like Methoxy Poly(ethylene glycol) Acrylate Solid Polymer Electrolytes

Solid polymer electrolyte with good thermal stability and flexibility is an excellent candidate for solid-state lithium metal batteries, while its low ionic conductivity caused by high crystallinity limits its application at ambient temperature. Here a metal organic framework (zeolitic imidazolate framework-8, ZIF-8) composited comb-like methoxy poly(ethylene glycol) acrylate polymer electrolyte (MCPE) with high ionic conductivity (9.96 × 10⁻⁵ S cm⁻¹ at 30 °C) is prepared by an in situ UV polymerization method. The as-prepared MCPE exhibits improved mechanical property due to the introduction of porous ZIF-8 nanofillers, which is beneficial to suppress the growth of lithium dendrites. Consequently, the LiFePO₄||MCPE||Li cells show a high capacity of 116 mAh g⁻¹ at 30 °C and 0.5 C, and maintain 89.4% of initial capacity after 150 cycles with the average Coulombic efficiency of 99.9%. These results demonstrate that the MCPE shows great potential in solid-state lithium metal batteries near room temperature.     

Degradable Superhydrophilic Iron-Pillared Bentonite Doped with Polybutylene Adipate/Terephthalate Open-Cell Foam: Its Application in Dye Degradation,Removal of Heavy Metal Ions,and Oil–Water Separation

Development of industrialization has brought convenience to people's lives; however, it has also brought serious harm to the environment, where, water pollution is the most obvious. Here, a polybutylene adipate terephthalate (PBAT) open-cell foam doped with iron-pillared bentonite (IPB) is prepared by using sugar as a pore-forming agent and solution phase separation, and then combined with a solution dipping method to coat the foam surface with a polyacrylamide/SiO₂, which makes the PBAT foam superhydrophilic. The static adsorption effect of superhydrophilic IPB-doped PBAT open-cell foam on methylene blue (MB) and Cu²⁺ is studied. The adsorption isotherm fitting shows that the adsorption conforms to the Langmuir model and it has biased toward monolayer adsorption. The adsorption kinetics fitting confirms that the adsorption process is in line with the pseudo-second-order adsorption model, which is dominated by chemical adsorption. The modified PBAT open-cell foam has an adsorption effect on Cu²⁺; however, it has weak cyclic adsorption capacity. It shows a good cyclic adsorption ability for the cationic dye MB and it has >95% photodegradation efficiency of the MB after five time's cyclic adsorption. The superhydrophilicity makes the foam to have better applications in oil–water separation.     

Facile Modification of Biochar Derived from Agricultural Straw Waste with Effective Adsorption and Removal of Phosphorus from Domestic Sewage

Journal of Inorganic and Organometallic Polymers and Materials - In recent decades, straw waste is the major byproduct around agriculture that has become one of the factors of environmental...     

水质稳定剂HPDP缓蚀阻垢性能评定

用静态阻垢，旋转挂片失得法实验研究了ＨＰＤＰ对ＣａＣＯ３，Ｃａ３（ＰＯ４）２等的阻垢性能以及对Ｑ２３５碳钢的缓蚀性能等。试验证明，ＨＰＤＰ是一种优良的阻垢缓蚀剂，适用于高温，高碱，高ＰＨ，高浓缩倍数的循环冷却水处理，具有广阔的应用前景。     

中国蠕墨铸铁40年

含有蠕虫状石墨的铸铁作为正式的工程材料来研究和应用，我国与国外同期开始，而投入工业应用则早于国外。早在20世纪60-80年代，我国对它就作了广泛深入的试验研究。据不完全了解，迄今，我国在不同场合已发表了600多篇文献，其中研究过十种生产方法，并研究了三十余种蠕化剂，提出了获得蠕虫状石墨的蠕化剂临界加入量计算式和蠕化处理后的“浮渣”形成机理；在铸造性能、金相组织、机械-物理性能和某些使用性能、铸件加工的工艺特性以及它们之间相互关系等方面的研究趋于基本完善，并制订了蠕铁金相和牌号的部级标准；在蠕铁一次结晶理论方面的研究仍处于百花齐放状态；蠕铁通过各种热处理和合金化可进一步提高性能，扩大其应用范围；在交通运输及内燃机零件、矿山和冶金用品以及在交变热载荷下工作的铸件、机械制造及液压件类铸件、轻工及纺织机械铸件、军工产品等等领域内生产或试生产着数百种蠕铁件，单件重量最大达38t，最小约1kg，年产量约有20万t，其中绝大多数采用冲天炉熔炼的不经预处理的铁液来制取，少数采用电炉、冲天炉-电炉或高炉-电炉双联熔炼：列举了蠕铁的典型应用实例；但在蠕铁炉前快速检验和蠕铁件显微组织无损检验的较精确的手段方面仍是薄弱环节；提出了今后应加强的工作；总的看来，我国蠕铁的研究、生产和应用水平不亚于国外，一些方面还处于领先地位。正文共约43000字．参考文献329篇，表5个。     

Stage-efficiency of centrifugal extractor used in nuclear industry

1　INTRODUCTIONComparedwithamixer settlerorpulsedcolumnusedinthenuclearfuelreprocessingextraction pro cesses,ashort residence timecentrifugalextractorcatchesresearcher seyesbecauseofthe goodphaseseparationandasmallhold upvolume .Itshowsthefollowingadvantagesinthenuclearindustry[1] :1)Reducingsolventdegradationduetoradiation ;2 )Reducinginventoryofaqueousandorganicphases ,whichgivesrapidstart upandshut down ;3)Com pactdesignthatcontributestothereductionofplantcost .Manydifferenttypesofcen…     

烧结工艺对β-氮化硅陶瓷的影响

以β-Si3N4粉末为原料,以YAG（钇铝石榴石）为烧结助剂,通过气氛压力烧结（GPS）制备出致密的β-氮化硅陶瓷材料,形成大小均匀的柱状颗粒和小球状颗粒复合显微结构,研究了烧结助剂质量分数、烧结温度以及保温时间对β-氮化硅陶瓷致密化程度及力学性能的影响.