Extension of the gap statistics index to fuzzy clustering

The well-known gap statistic index proposed by Tibshirani et al. has successfully applied in many clustering evaluations. However, the gap statistic index cannot evaluate the clustering partitions from any fuzzy clustering algorithm. This is because fuzzy clustering cannot provide the within-cluster similarity measure that is used in the gas statistic index. Thus, the applicable range of the gap statistic index is very limited. In this paper, we present a new method that extends the gap statistic index to fuzzy clustering by using fuzzy membership notations. Our proposed method can extend the applicability of the gap statistic index, and outperform other existing fuzzy indices in several aspects. Experiments on eight sets of synthetic and real datasets are used to verify the applicability and efficiency of the proposed method.     

高压切割喷嘴冲击磨损的数值分析

以复用矿井含煤颗粒的水对高压切割喷嘴的磨损物理问题为研究对象,采用计算流体力学理论进行数值计算,分析讨论了质量浓度为10、15、20、25、30、40 mg/L条件下速度、剪应力、磨损的分布以及变化关系。计算、分析结果表明:磨损主要发生在出口部位和锥体的后半部份,入口部份和锥体前半部份磨损较小;入口部位、锥体部位磨损量、剪应力随质量浓度增加变化较小;出口部位磨损量在质量浓度为10～20 mg/L减小较快,超过20 mg/L后变化不大;出口部位流体速度、磨损量、剪应力与质量浓度间存在对应关系。煤粒入口速度与混合物速度相同、锥体部位煤粒流体速度低于锥体部位混合物速度(平均值)约79.4%;煤粒出口部位速度随质量浓度的增大而呈现先增加后减小的趋势,速度最大值发生在浓度20 mg/L。     

浅析《计算机网络》课程实验环境架构

本文针对当前贫穷地区高职高专计算机网络实验教学的特点,结合学校和本地实际情况,从实验课程教学内容及形式方法等方面探讨了计算机网络实验环境架构的有关问题.对计算机网络实验的环境构架存在的不足,给出了解决方案.     

浅谈我国网络数据库的发展及对策

从网络数据库的概念、特点、发展趋势等方面论述了我国网络数据库的发展情况,针对我国网络数据库存在的问题提出了发展我国网络数据库的对策.     

Test frame updating in CPM testing of Prolog programs

Category Partition Method (CPM) is a general approach to specification-based program testing, where test frame reduction and refinement are two important issues. Test frame reduction is necessary since too many test frames may be produced, and test frame refinement is important since during CPM testing new information about test frame generation may be achieved and considered incrementally. Besides the information provided by testers or users, implementation related knowledge offers alternative information for reducing and refining CPM test frames. This paper explores the idea by proposing a call patterns semantics based test frame updating method for Prolog programs, in which a call patterns analysis is used to collect information about the way in which procedures are used in a program. The updated test frames will be represented as constraints. The effect of our test frame updating is two-fold. On one hand, it removes “uncared” data from the original set of test frames; on the other hand, it refines the test frames to which we should pay more attention. The first effect makes the input domain on which a procedure must be tested a subset of the procedure’s input domain, and the latter makes testers stand more chance to find out the faults that are more likely to show their presence in the use of the program under consideration. Our test frame updating method preserves the effectiveness of CPM testing with respect to the detection of faults we care. The test case generation from the updated set of test frames is also discussed. In order to show the applicability of our method an approximation call patterns semantics is proposed, and the test frame updating on the semantics is illustrated by an example.

一种完整的汉字识别系统设计

数字图像处理是计算机视觉技术的在交通管理领域的一个重要课题.它是指将图像信号转换成数字信号并利用计算机对其进行处理的过程.字符及汉字识别技术的成功运用,节省了大量的人力,而不影响正常的车辆行驶,并且可以快速的记录车辆的违章情况,它是交通管理自动化中的一项有效手段.本文将介绍一种完整的汉字识别系统设计,实现对36号宋体汉字的辨识.     

A piecewise analysis method to stability analysis of linear continuous/discrete systems with time‐varying delay

The delay‐dependent stability problem of linear continuous/discrete systems with time‐varying delay is investigated based on a piecewise analysis method (PAM). In the method, the variation interval of the time delay is firstly divided into several subintervals. By checking the variation of the Lyapunov functional in every subinterval, some new delay‐dependent stability criteria are derived. Several numerical examples show that our method can lead to much less conservative results than those in the existing references. Moreover, when the number of the divided subintervals increases, the corresponding criteria can provide an improvement on the results. Copyright © 2008 John Wiley & Sons, Ltd.     

Diffractive-phase-element design that implements several optical functions

A scheme for the design of diffractive phase elements (DPE's) that integrates several optical functions is presented in a consistent sense based on the general theory of amplitude-phase retrieval and the Yang-Gu algorithm [Appl. Opt. 33, 209 (1994)]. We extend the original Yang-Gu algorithm to treat a system illuminated by a beam of incident light whose components are at different wavelengths, and a set of equations for determining the phase distribution of the DPE is derived. The profile of a surface-relief DPE can be designed with an iterative algorithm. Numerical simulations are carried out for the design of one-dimensional DPE's capable of both demultiplexing different wavelength components and focusing each partial wave at predetermined positions. The influence of the extension of sampling points in the DPE's from ideal geometric points to physical spots on design results is also investigated. The numerical simulation results show that the new algorithm can be used successfully to design the desired DPE's. It is therefore expected to be useful in the design of DPE's for micro-optical systems.     

催化裂化装置龟甲网双层衬里的改进

通过对催化裂化装置老的龟甲网双层社里使用情况的调查研究以及对存在问题的分析,提出了改进措施。经近几年的实际应用考核证明,改进措施是行之有效的。在此基础上制订了院标“ＢＬ型隔热耐磨衬里施工技术要求”。     

A 2.20 eV Bandgap Polymer Donor for Efficient Colorful Semitransparent Organic Solar Cells

Semitransparent organic solar cells (ST-OSCs) have attracted increasing attention due to their promising prospect in building-integrated photovoltaics. Generally, efficient ST-OSCs with good average visible transmittance (AVT) can be realized by developing active layer materials with light absorption far from the visible light range. Herein, the development of ultrawide bandgap polymer donors with near-ultraviolet absorption, paired with near-infrared acceptors, is proposed to achieve high-performance ST-OSCs. The key points for the design of ultrawide bandgap polymers include constructing donor–donor type conjugated skeleton, suppressing the quinoidal resonance effect, and minimizing the twist of conjugated skeleton via noncovalent conformational locks. As a proof of concept, a polymer named PBOF with an optical bandgap of 2.20 eV is synthesized, which exhibited largely reduced overlap with the human eye photopic response spectrum and afforded a power conversion efficiency (PCE) of 16.40% in opaque device. As a result, ST-OSCs with a PCE over 10% and an AVT over 30% are achieved without optical modulation. Moreover, colorful ST-OSCs with visual aesthetics can be achieved by tuning the donor/acceptor weight ratio in active layer benefiting from the ultrawide bandgap nature of PBOF. This study demonstrates the great potential of ultrawide bandgap polymers for efficient colorful ST-OSCs.