TA15合金的热变形行为及加工图

研究了TA15合金的热模拟压缩实验。结果表明：变形温度的升高和应变速率的减小使峰值应力和稳态应力显著降低，变形温度会影响进入稳态流动所需变形量。以热模拟压缩实验为基础，建立的加工图表明：TA15合金高温变形时存在2个非稳定区域，一个是变形温度1300K以上和应变速率10．0s^-1以上的区域，另一个是变形温度1200K以下和应变速率0．006s^-1～1．995s^-1之间的区域。同时，建立的TA15合金高温变形时的流动应力模型表征了变形温度、应变速率和变形程度对流动应力的影响，模型的计算精度较高。     

一种新颖的低层视觉特征到高层语义的映射方法*

通过在低层视觉特征上提取图像的局部颜色和纹理特征,再利用模糊神经网络建立低层视觉特征和高层语义特征之间的映射,实现了图像属性信息的有效传递和可靠检索.最后,为了提高检索效率,把相关反馈引进到图像检索系统中.实验证明,该方法取得了较好的检索查全率和准确率.     

一种新的动态权重更新相关反馈方法*

提出了正负相关图像所占比例与特征值的标准方差相结合来调整对应权值的方法.为了避免相关反馈的权值调整陷入局部最优状态,引入一个干扰因子,使权值跳出局部最优区域.结果表明了该方法的优越性.     

高速铁路军事运用形势分析与对策

为探索高速铁路运输投送保障模式,提高部队投送能力,结合未来作战模式演变、高速铁路路网规划以及高速铁路货运技术发展实际,深入分析高速铁路未来军事运用的形势要求,系统梳理高铁车辆、轨道线路、桥隧站场、列控系统等方面存在的矛盾问题,从探索模式理论、创新技术手段、贯彻国防要求、完善标准法规等方面提出高速铁路军事运用对策.     

Electrolytic cell engineering and device optimization for electrosynthesis of e-biofuels via co-valorisation of bio-feedstocks and captured CO2

Utilizing CO₂ in an electro-chemical process and synthesizing value-added chemicals are amongst the few viable and scalable pathways in carbon capture and utilization technologies.CO₂ electro-reduction is also counted as one of the main options entailing less fossil fuel consumption and as a future electrical energy storage strategy.The current study aims at developing a new electrochemical platform to produce low-carbon e-biofuel through multifunctional electrosynthesis and integrated co-valorisation of biomass feedstocks with captured CO₂.In this approach,CO₂ is reduced at the cathode to produce drop-in fuels(e.g.,methanol)while value-added chemicals(e.g.,selective oxidation of alcohols,aldehydes,carboxylic acids and amines/amides)are produced at the anode.In this work,a numerical model of a continuous-flow design considering various anodic and cathodic reactions was built to determine the most techno-economically feasible configurations from the aspects of energy efficiency,environment impact and economical values.The reactor design was then optimized via parametric analysis.     

Photocatalytic syngas synthesis from CO2 and H2O using ultrafine CeO2-decorated layered double hydroxide nanosheets under visible-light up to 600 nm

The rational design of photocatalyst that can effectively reduce CO₂ under visible light(l>400 nm),and simultaneously precise control of the products syngas(CO/H2)ratio is highly desirable for the Fischer-Tropsch reaction.In this work,we synthesized a series of CeO₂-decorated layered double hydroxides(LDHs,Ce-x)samples for photocatalytic CO₂ reduction.It was found that the selectivity and productivity of CO and H₂ from photoreduction of CO₂ in conjunction with Ru-complex as photosensitizer performed an obvious“volcano-like”trend,with the highest point at Ce-0.15 and the CO/H₂ ratio can be widely tunable from 1/7.7 to 1/1.3.Furthermore,compared with LDH,Ce-0.15 also drove photocatalytic CO₂ to syngas under 600 nm irradiation.It implied that an optimum amount of CeO₂ modifying LDH promoted the photoreduction of CO₂ to syngas.This report gives the way to fully utilize the rare earth elements and provides a promising route to enhance the photo-response ability and charge injection efficiency of LDH-based photocatalysts in the synthesis of syngas with a tunable ratio under visible light irradiation.     

Efficient MgO-doped CaO sorbent pellets for high temperature CO2 capture

Novel MgO-doped CaO sorbent pellets were prepared by gel-casting and wet impregnation. The effect of Na⁺ and MgO on the structure and CO₂ adsorption performance of CaO sorbent pellets was elucidated. MgO-doped CaO sorbent pellets with the diameter range of 0.5-1.5 mm exhibited an excellent capacity for CO₂ adsorption and adsorption rate due to the homogeneous dispersion of MgO in the sorbent pellets and its effects on the physical structure of sorbents. The results show that MgO can effectively inhibit the sintering of CaO and retain the adsorption capacity of sorbents during multiple adsorption-desorption cycles. The presence of mesopores and macropores resulted in appreciable change of volume from CaO (16.7 cm³∙mol⁻¹) to CaCO₃ (36.9 cm³∙mol⁻¹) over repeated operation cycles. Ca2Mg1 sorbent pellets exhibited favorable CO₂ capture capacity (9.49 mmol∙g⁻¹), average adsorption rate (0.32 mmol∙g⁻¹∙min⁻¹) and conversion rate of CaO (74.83%) after 30 cycles.     

面向电力系统潮流仿真的语音交互研究

以深度学习为代表的人工智能技术不断发展,正逐步渗透并融入电力系统等传统领域.为增强潮流仿真中人机交互的智能化程度,减少仿真技术人员在输入数据、计算分析等过程中的重复劳动,本文从语音识别理论和工程应用相结合的角度开展研究,提出了一种在潮流仿真中嵌入语音识别技术的方法.首先,对现有潮流仿真软件融入语音识别技术的可行性进行了探讨;其次,利用基于开源的电力系统分析工具Pandapower,设计了潮流仿真的语音识别流程,提出了相应的实现方法;最后,在建立的语音识别系统上,对1个仿真算例进行了测试.测试结果表明,本文提出在潮流仿真中嵌入语音识别技术的方法,能有效地实现潮流数据的语音编辑以及潮流计算的语音控制等功能.     

Characterization of wet microalgal cells pretreated with steam for lipid extraction

Steam pretreatment was employed to disrupt microalgal cells for lipids extraction.Effects of steam pre-treatment on microstructure of microalgal cells were investigated through scanning electron microscopy(SEM) and transmission electron microscopy (TEM).Effect of treatment on lipid extraction was also stud-ied.Microalgal cell walls were distorted after steam pretreatment due to the hydrolysis of organic macro-molecules contained in cell wall.Maximum curvature was increased from 1.88 × 10-6 m-1 to 1.43 × 10-7 m-1 after treatment with the steam at 130 ℃.The fractal dimension of microalgal cells increased from 1.25 to 1.30 after pretreatment for 15 min,and further increased to 1.47 when the pre-treatment time was increased to 60 min.Increased steam pretreatment temperature and time enhanced the hydrolysis of organic macromolecules,and finally destroyed microalgal cell walls at pretreatment temperature of 130 ℃ and pretreatment time of 60 min.Lipid extracted from wet microalgal was signif-icantly increased (2.1-fold) after pretreatment.     

风电叶片大梁用碳纤维拉挤板材组合式加载压缩(CLC)测试浅析

依据ASTM D6641/D6641M-16《采用组合加载方式(CLC)测定聚合物基复合材料层压板压缩性能试验方法》标准,对风电叶片大梁用碳纤维拉挤板材进行压缩性能测试,通过采用不同类型的加强片制备压缩试样,对所测得的压缩强度、压缩模量和压缩应变的试验结果与失效模式进行分析.结果 表明,采用文中C型加强片制备的压缩试样,测得的压缩强度、压缩模量、压缩应变以及失效模式均较为理想,试验结果重复性较好.