EBR胶乳凝胶的控制及其对ABS树脂冲击性能的影响

主要讨论了摩尔质量调节剂，延长后期反应时间，提高后期反应温度，过硫酸钾用量等对乙烯－丁二烯橡胶（EBR）胶乳凝胶的影响；同时讨论了低凝胶条件和高凝胶条件下凝胶对ABS树脂性能的影响。结果表明：低凝胶条件,ABS树脂的冲击性能随凝胶质量分数的增加而增加；高凝胶条件下，则随凝胶质量分的增加而降低，得到了EBR胶乳生产中凝胶的主要控制方法，并通过控制EBR胶乳凝胶来实现对ABS树脂冲击性能的控制。     

BaO-Al2O3-SiO2微晶玻璃密度的计算

为了评估密度作为BaO-Al2O3-SiO2(BAS)微晶玻璃晶化热处理和质量监控手段的可行性和准确性,提出一种测定微晶玻璃密度的方法.利用x射线衍射和Rietveld结构精修法准确测定烧结制备的BAS微晶玻璃中各晶相的质量分数和密度,研究了加和法则应用于BAS系微晶玻璃的准确性.对比精修得到的晶相的晶胞参数和对应标准卡片上纯晶相的晶胞参数,得到样品中各晶相的密度.结果表明:BAS微晶玻璃中各晶相与对应纯晶相的密度差别极其微小.利用获得的各相的质量分数,根据玻璃工艺学的经验数据计算残余玻璃相的密度.最后,根据加和法则计算得到BAS微晶玻璃样品的密度,所得的密度值与利用Archimedes法测得的密度值的相对偏差小于1.4%.     

Position Unmanned Aerial Vehicles in the Mobile Ad Hoc Network

This paper considers the problem of employing multiple unmanned aerial vehicles (UAVs) to the mobile ad hoc network (MANET) as relay backbone nodes to construct the backbone network, to improve the network connectivity, and to address many issues in the MANET such as linkage, capacity, load balance, and reliability. With considering the dynamic nature of the problem, this study provides several linear location problem models and their extensions to accommodate these issues. Due to the size of linear location models associated with a large number of constraints, the problem becomes computational challenging even with modest size of nodes. To overcome the computational barrier, we recast these location problem models using a quadratic unconstrained binary optimization (QUBO) framework and solve these QUBO models with a Tabu search heuristic with preprocessing. The analysis of the solutions that are produced by QUBO together with the comparisons made with the linear model highlight both the attractiveness and robustness of the proposed approach. The results of this study provide support to future advanced routing protocol development.     

发用防晒成分芦荟甙的提取

芦荟甙不仅具有防晒功效,而且还具有润泽、软化头发,防止断发、护发止痒的功效.设计正交实验,用乙醇水溶液回流溶出芦荟甙,用减压蒸馏的方法得到产品,并找出最佳反应条件.用溴水和红外光谱定性分析,证明了所得产品为芦荟甙.将芦荟甙加入洗发香波中,使用效果良好.实验方法操作简单、可行性高,为芦荟的提取研究提供数据.     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

CO2/R170混合物作为复叠式制冷系统低温环路制冷剂的性能

针对CO2/R170混合物在复叠式制冷系统低温环路使用的工况，建立了固液平衡和汽液平衡的数学模型，决定了保证混合物在较低温度下不结晶的配比。在一定的配比范围内对混合物进行了循环性能和可燃性分析。研究了混合物配比对循环性能参数和可燃性的影响，以及中间温度在高温环路使用R290、低温环路使用CO2/R170混合物时，复叠式制冷系统整体制冷系数（COP）的变化趋势。研究表明，这种混合物适宜作为复叠式制冷系统低温环路的制冷剂。     

1-(5-乙基-1,3,4-噻二唑基)-3-苯基硫脲的合成及生物活性

研究了 1 - ( 5 -乙基 - 1 ,3,4-噻二唑基 ) - 3-苯基硫脲的合成及抗菌活性。以 5 -乙基 - 2 -氨基 - 1 ,3,4-噻二唑和异硫氰酸苯酯为原料 ,在十六烷基三甲基溴化铵催化下 ,合成 1 - ( 5 -乙基 - 1 ,3,4-噻二唑基 ) - 3-苯基硫脲 ,找到了较好的合成工艺条件 ,结果表明 :5 -乙基 - 2 -氨基 - 1 ,3,4-噻二唑和异硫氰酸苯酯的摩尔比为 1∶ 1 .8,乙腈为溶剂 ,水浴加热回流 4.0 h,十六烷基三甲基溴化铵为 2 g,1 - ( 5 -乙基 - 1 ,3,4-噻二唑基 ) - 3-苯基硫脲的产率为 5 9.76%。同时发现 1 - ( 5 -乙基 - 1 ,3,4-噻二唑基 ) - 3-苯基硫脲有较强的抗菌活性     

磷酸三聚氰胺复盐结晶法净化湿法磷酸技术进展

本文讨论了结晶法净化湿法磷酸方法，对复盐结晶法净化湿法磷酸生产磷酸盐，多聚磷酸盐的生产方法，工艺流程，工艺特点，产品质量进行了研究。     

不同形貌ZnO气敏材料的制备及影响气敏性因素分析

以锌盐和碱为原料,采用水热和溶剂热法合成了三种形貌的氧化锌粉体,利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)和X射线光电子能谱仪(XPS)对产物的结构和形貌及表面化学状态进行了表征,并将粉体制备成厚膜型气敏元件,测试了其对几种还原性气体的气敏性能,结果表明:在工作温度为395℃时,三种形貌氧化锌对相同浓度的同种测试气体的灵敏度大小顺序为:菜花状氧化锌﹥棒状氧化锌﹥六棱柱状氧化锌。并对影响氧化锌材料气敏性的各种因素进行了分析。