Use of LINbO3 for Design of Device-type Catalysts with Activity Controllable Functions

A poled ferroelectric LiNbO₃ single crystal with high spontaneous polarization was employed as a catalyst support, and the static and dynamic effects of the polar substrate surfaces on the adsorptive and catalytic properties of thin film catalysts deposited were shown. For the static effect, it was demonstrated that the surface conductivity of copper and metal-free phthalocyanine films increased by the adsorption of NO gas, to a larger extent, when the substrate was the negative polar surface, compared to the positive one. The role of the polar substrates is explained In terms of a band bending model. For the dynamic effect, the Rayleigh surface acoustic wave generated on the LiNbO₃ substrate was shown to enhance the catalytic activity for ethanol oxidation on Cu and Ag thin film catalysts deposited on the propagation path. It is proposed that the catalyst activation is mainly due to an electric Held produced. The use of poled LiNbO₃ is suggested to be effective for the development of a device-type catalyst with activity controllable functions.     

Mechanical Properties of Alumina/Silicon Carbide Whisker Composites

The improvement of mechanical properties of Al₂O₃/SiC whisker composites has been studied with emphasis on the effects of the whisker content and of the hot-pressing temperature. Mechanical properties such as fracture toughness and fracture strength increased with increasing whisker content up to 40 wt%. In the case of the high SiC whisker content of 40 wt%, fracture toughness of the sample hot-pressed at 1900° decreased significantly, in spite of densification, compared with one hot-pressed at 1850°. Fracture toughness strongly depended on the microstructure, especially the distribution of SiC whiskers rather than the grain size of the Al₂O₃ matrix.     

Thermal behaviour of TiO2-encapsulating polymers

Comparing the thermal properties of TiO₂ encapsulating polystyrene and poly(methyl methacrylate) with those of TiO₂ dispersion polymers it was found that the encapsulating polymers have two thermal relaxation regions. The activation energy of those thermal relaxation regions was determined using the Wunderlich method and it was found that the values are similar to the activation energy for the dynamic dispersion. It is suggested that the low-temperature thermal relaxation is caused by the local change of conformation of molecular chains, while the high-temperature thermal relaxation is similar to that of the normal glass transition temperature including the interaction with TiO₂. In addition, the thermal behaviour near the degradation point in different atmospheres indicates that the encapsulating polymer has a specific structure for adsorbing a large amount of oxygen.     

A convenient method for preparation of monofluorocarboxylic acids

Monofluoro esters were prepared by the reaction of hydroxy esters with N,N-diethyl-1,1,2,3,3,3-hexafluoro propylamine (PPDA). Saponification of these monofluoroesters with enzyme (lipase MY) was attempted to give their corresponding monofluorocarboxylic acids in moderate yields.     

Two-stage pyrolysis of heavy oils. 3. Pyrolysis of tar-sand bitumens. Relation between ethylene yield and structural characteristics of heavy oils

Thermal cracking of tar-sand bitumens has been carried out using a two-stage pyrolysis reactor with temperature zones of 440°C and 750–800°C, respectively. Feedstocks were pyrolysed in the first stage into cracked oils, which were carried to the second stage for subsequent pyrolysis. Only 12–14 wt% of ethylene was obtained from tar-sand bitumens at the residence time of 1.2 s in the second stage, although 27 and 16 wt% were obtained from Taching and Iranian heavy vacuum residues, respectively. The tar-sand bitumens contain shorter paraffinic straight-chains and have more branched molecules than the vacuum residues of petroleum. A straight-chain paraffin index is proposed, with which a good correlation was obtained between ethylene yield and the fraction of straight-chain paraffin carbons in the heavy oil.     

Kinetic study on the first stage during thermal degradation of polystyrene

The kinetic parameters of the first stage of polystyrene degradation have been investigated to elucidate the reaction mechanisms using the flow reactor system. The decrease in molecular weight of polystyrene was recorded at minute intervals over the temperature range 310°–390°C. Generally, the first and second stages were observed by thermogravimetric analysis (t.g.a.), however in the early stage of the degradation volatile yields of at least 5% occurred. Therefore, using t.g.a. analysis it is difficult to detect this earlier stage. It became evident that the first stage in the earlier part of the reaction could be detected by g.p.c. analysis. We have observed the hidden kinetic parameters of the nature of the first stage of the polystyrene degradation. The results indicate that the main chains were degraded randomly with the small quantitative volatile groups in the first stage and the rates of decrease in molecular weight in the first stage against reaction temperatures were evaluated as log k_s = 12.0 ? 41300/RT.     

Nitrous oxide emissions from fertilized upland fields in Thailand

Nitrous oxide (N₂O) emission from fertilized maize fields was measured using a closed chamber at four experimental sites in Thailand. The average measured N₂O flux from unfertilized plots through crop season was 4.16 ± 1.52, 5.05 ± 1.65, 5.25 ± 1.68 and 6.74 ± 2.95 g N₂O-N m^-2 h^-1, at Nakhon Sawan, Phra Phutthabat, Khon Kaen and Chiang Mai, respectively. Increased N₂O emissions by the application of nitrogen fertilizer were 0.22–0.44, 0.19–0.38%, 0.12–0.24 and 0.08–0.15% of the applied N, respectively. Compared to other data, N₂O emission rate to applied nitrogen was not significantly different between the data of Thailand and the Temperate Zone.     

The Direct Synthesis of β-hydroxy-acids by Lithium Naphthalene and Acetic Acid

Lithium naphthalene reacts with acetic acid to give α-anion of lithium acetate. The reaction of this anion with various ketones gives the corresponding β-hydroxy-acids in good yield.