Surface pressure and wind load characteristics on prisms immersed in a simulated transient gust front flow field

Thunderstorm generated gust fronts are responsible for various degrees of structural damage in many areas of the world. However, the resulting impact of gust front winds is not fully understood to such a level that their flow kinematics, dynamics and impact on structures can be quantified with some certainty. Gust front winds are transient in nature and have a flow profile which differs significantly from a typical boundary layer flow field. This study focuses on investigating the effects of this flow profile and its transient nature on the aerodynamics of bluff, prismatic bodies. A gust front type flow field is generated using a multiple fan wind tunnel and the resulting surface pressures are captured on a suite of prismatic models, which vary in size in relationship to the oncoming wind profile. The temporal variations in surface pressures are analyzed using traditional time, frequency and time-frequency domain schemes. Results indicate the changing nature of the surface pressure field in time, highlighting both qualitative and quantitative differences between local and area-averaged pressures under a host of flow profiles.     

Evaluation of hexabromocyclododecane in fish and marine mammal oil supplements

We analyzed the dietary fish and marine mammal oil supplements purchased from Japanese markets for hexabromocyclododecane (HBCD); 20 brands were analyzed by liquid chromatography–tandem mass spectrometry (LC/MS/MS). HBCD was detected in 15 of 22 samples, and the concentrations of all the HBCD isomers (α, β, and γ) ranged from <0.9 to 67 ng/g lipid weight. α-HBCD was the dominant residue among the HBCD isomers. However, the composition of HBCD isomers varied according to the sample type. We found that 1 sardine oil brand and 2 shark liver oil brands extracted from fish captured in seawater around Japan contained relatively high levels of HBCD, indicating that both the surface and deep seawaters around Japan may have been contaminated with HBCD.     

Present status of the High Temperature Engineering Test Reactor (HTTR)

In Japan, the research and development on the High Temperature Gas-cooled Reactors (HTGRs) had been carried out for more than fifteen years since 1969 as the multi-purpose Very High Temperature gas-cooled Reactor (VHTR) program for direct utilization of nuclear process heat such as nuclear steel making. Recently, reflecting the change of the social and energy situation and with less incentives for industries to introduce such in the near future, the JAERI changed the program to a more basic ‘HTTR program’ to establish and upgrade the HTGR technology basis.The HTTR is a test reactor with a thermal output of 30 MW and reactor outlet coolant temperature of 950°C, employing a pin-in-block type fuel block, and has the capability to demonstrate nuclear process heat utilization using an intermediate heat exchanger. Since 1986 a detailed design has been made, in which major systems and components are determined in line with the HTTR concept, paying essential considerations into the design for achieving the reactor outlet coolant temperature of 950°C. The safety review of the Government started in February 1989. By request of the Science and Technology Agency the Reactor Safety Research Association reviewed the safety evaluation guideline, general design criteria, design code and design guide for the graphite and the high-temperature structure of the HTTR.The installation permit of the HTTR was issued by the Government in November 1990.     

EVALUATION ON LIMITATION OF LINEAR ELASTIC FRACTURE MECHANICS FOR SMALL FATIGUE CRACK GROWTH

Abstract— The growth characteristics of small fatigue cracks were investigated under rotary bending in a high tensile strength steel, and the critical crack length above which linear elastic fracture mechanics (LEFM) is applicable was evaluated systematically from the results of the present study and previous studies in which two steels having different microstructures and strengths were used. It is found that the critical crack length extends over two regions each exhibiting different growth mechanisms. These regions of microstructurally small cracks and mechanically small cracks are found to be a unique function of the microstructural unit size and the yield strength of the materials, respectively. Therefore, using these relationships, it is possible to estimate the critical crack length for a given material.     

Configuration of sample points for the reduction of multicollinearity in regression models with distance variables

Regression models often suffer from multicollinearity that greatly reduces the reliability of estimated coefficients and hinders an appropriate understanding of the role of independent variables. It occurs in regional science especially when independent variables include the distances from urban facilities. This paper proposes a new method for deriving the configuration of sample points that reduces multicollinearity in regression models with distance variables. Multicollinearity is evaluated by the maximum absolute correlation coefficient between distance variables. A spatial optimization technique is utilized to calculate the optimal configuration of sample points. The method permits us not only to locate sample points appropriately but also to evaluate the location of facilities from which the distance is measured in terms of the correlation between distance variables in a systematic way. Numerical experiments and empirical applications are performed to test the validity of the method. The results support the technical soundness of the proposed method and provided some useful implications for the design of sample location.     

Compensation of high-frequency components of wind load by wind tunnel testing

To analyze the wind-induced response of structures, wind tunnel tests are often carried out to determine the wind loads on structures. However, due to the influence of similarity requirements in wind tunnel tests, the resulting data from the model test still needs to be translated by similarity rules for predicting the real loads on prototype structures. During this process, an inevitable result is that the high-frequency components of fluctuating wind loads get lost, which leads to some unexpected errors in the subsequent wind-induced response analysis. To solve this problem, a frequency compensation method is put forward. The purpose of this method is to reconstruct the high-frequency part of fluctuating wind loads based on experimental data and some basic principles of the aerodynamics of bluff bodies. The causes and effects of the frequency compensation problem are discussed first, then a practical method of frequency compensation is proposed by combining the fluctuating wind energy spectrum theory and the Proper Orthogonal Decomposition technique. Based on this method, the wind-induced response of a single-layer reticulated shell is analyzed to show the validity and necessity of this method.     

Energy-level alignment at model interfaces of organic electroluminescent devices studied by UV photoemission: trend in the deviation from the traditional way of estimating the interfacial electronic structures

The electronic structures of model interfaces of organic electroluminescent (EL) devices were investigated with UV photoemission spectroscopy (UPS). Interfaces of TTN (tetrathianaphthacene) and TCNQ (tetracyanoquinodimethane) were also studied as extreme cases for hole transport and electron transport material, respectively. For all organic/metal interfaces studied, the work function of metal electrode was changed by deposition of organic layer, i.e., the vacuum level was shifted at the interface, indicating the invalidity of the traditional energy level alignment model where a common vacuum level was assumed at organic/metal interface. At TCNQ/Au, DP-NTCI/Al, which are acceptor/metal interfaces, upward shift of the vacuum level of organic layer relative to that of metal was observed, suggesting the formation of interfacial dipole due to electron-transfer from metal to acceptor. At other organic/metal interfaces, TPD(N, N'-diphenyl-N, N'-(3-methylphenyl)-1, 1'-biphenyl-4, 4'-diamine)/Au or ITO (indium tin oxide), ALq/sub 3/ (tris(8-hydroxyquinolino) aluminum)/Al, DP-NTCl(N, N'-diphenyl-1,4,5,8- naphthyltetracarboxylimide)/Al or Au, downward shift of the vacuum level was observed. Such downward shift has been also observed in our previous study for porphyrin/metal interfaces, and seems to be a trend for organic/metal interfaces at which no electron-transfer from metal to organic layer occurs. This trend suggests that the traditional model tends to underestimate (overestimate) the barrier height for hole (electron) injection. On the other hand, the vacuum level shift at ALq/sub 3//TPD interface was less than 0.1 eV, leading to an apparent applicability of the traditional model. However, it is not always the case for organic/organic interfaces: finite shift of 0.2 eV was observed at TTN/TCNQ interface due to electron-transfer from TTN to TCNQ. Possible origins of vacuum level shift at organic/metal interfaces were also discussed.     

Recycling of aluminum matrix composites

Separation of matrix metals in composites was tried on alumina short fiber-reinforced aluminum and 6061 alloy composites and SiC whisker-reinforced 6061 alloy composite for recycling. It is possible to separate molten matrix metals from fibers in the composites using fluxes that are used for melt treatment to remove inclusions. About 50 vol pct of the matrix metals was separated from the alumina short fiber-reinforced composites. The separation ratio of the matrix from the SiC whisker-reinforced 6061 alloy composite was low and about 20 vol pct. The separation mechanism was discussed thermodynamically using interface free energies. Since the flux/fiber interface energy is smaller than the aluminum/fiber interface energy, the replacement of aluminum with fluxes in composites takes place easily. Gases released by the decomposition of fluxes act an important role in pushing out the molten matrix metal from the composite. The role was confirmed by the great amount cavity formed in the composite after the matrix metal flowed out.     

Electron paramagnetic resonance spectra of Pr ions doped in BaMO3 (M=Ce, Zr, Sn) and SrCeO3

The isotropic electron paramagnetic resonance (EPR) spectra of powders with Pr⁴⁺ doped in BaMO₃ (M=Ce, Zr, Sn) were measured at 4.2 K. A very large hyperfine interaction with the ¹⁴¹Pr nucleus was observed. The results were analyzed based on the weak field approximation, and the g values and hyperfine coupling constants A were obtained. The measured g values are much smaller than |−10/7|, showing that the crystal field effect on the behavior of a 4f electron is large. The value of |g| decreases from 0.741 (Pr⁴⁺–BaCeO₃) to 0.583 (Pr⁴⁺–BaSnO₃), which is caused by the increase of the crystal field due to the shrinking of the lattice. In contrast, the hyperfine coupling constants are almost constant: A=0.060(1) cm⁻¹. The anisotropic EPR spectra were measured for the case of Pr⁴⁺–SrCeO₃, which indicates that the octahedral array of oxygen ions about Pr⁴⁺ is considerably distorted for this system.     

Effect of DNA topoisomerase I inhibitor on the transduction efficiency of an deno-associated virus vector in human airway epithelial cells

We tested the effects of a DNA topoisomerase inhibitor (camptothecin; CPT) on the transduction efficiency of AAV vectors in cultured human airway epithelial cells. The cells were treated with CPT for 24 hours, then exposed to AAV-CMV-LacZ for 1 hour at different multiplicities of infection (moi). Transduction efficiency of AAV vectors was assessed using X-gal staining as the percentage of LacZ-expressing cells. The transduction efficiency was approximately 1.5 to 10 fold increased by treatment with CPT prior to AAV vector exposure. However, treatment with CPT after AAV vector infection did not enhance the transduction efficiency of the vectors. These results suggest that pre-treatment with CPT increases the transduction efficiency of AAV vectors, probably by nodulating cellular function.