Phase Separation of Alkoxy-derived (Ti,Sn)O2 Oriented Thin Films

Oriented (Ti,Sn)O₂ thin films with modulated microstructure were successfully synthesized on sapphire substrates by using sol–gel processing combined with spinodal decomposition. The degree of orientation of (Ti_0.5Sn_0.5)O₂ thin films increased in the following order: sapphire (0001), (11     0), and (01     2). (Ti_0.5Sn_0.5)O₂ thin films underwent spinodal decomposition at 900°C by annealing. The variation of the 2theta value of the 202 reflection of (Ti_0.5Sn_0.5)O₂ films showed the typical behavior of spinodal decomposition. The rate of spinodal decomposition of the (Ti_0.5Sn_0.5)O₂ films on sapphire (11     0) was faster than that on sapphire (01     2) substrates. The characteristic modulated microstructure was observed for the spinodally decomposed (Ti_0.5Sn_0.5)O₂ films on sapphire (01     2) substrates by transmission electron microscopy. (Ti_0.3Sn_0.7)O₂ films on sapphire (01     2) substrates were binodally decomposed during annealing at 1300°C.     

Reinvestigation of the Sex Pheromone of the Wild Silkmoth Bombyx mandarina: The Effects of Bombykal and Bombykyl Acetate

Sex pheromone investigations of the domesticated silkmoth, Bombyx mori (Lepidoptera: Bombycidae), helped elucidate the molecular and physiological fundamentals of chemical communication in moths, yet little is known about pheromone evolution in bombycid species. Therefore, we reexamined the sex pheromone communication in the wild silkmoth, Bombyx mandarina, which is considered ancestral to B. mori. Our investigations revealed that (a) B. mandarina females produce (E,Z)-10,12-hexadecadienol (bombykol), but not (E,Z)-10,12-hexadecadienal (bombykal) or (E,Z)-10,12-hexadecadienyl acetate (bombykyl acetate), which are pheromone components in other bombycid moths; (b) antennae of male B. mandarina respond strongly to bombykol as well as to bombykal and bombykyl acetate; and (c) bombykal and bombykyl acetate strongly inhibit attraction of B. mandarina males to bombykol in the field. The present study clarifies the evolution of pheromone communication in bombycid moths.     

Enamel Matrix Derivative Promote Primary Human Pulp Cell Differentiation and Mineralization

Enamel matrix derivative (EMD) has been found to induce reactive dentin formation; however the molecular mechanisms involved are unclear. The effect of EMD (5–50 μg/mL) on primary human pulp cells were compared to untreated cells and cells incubated with 10⁻⁸ M dexamethasone (DEX) for 1, 2, 3, 7, and 14 days in culture. Expression analysis using Affymetrix microchips demonstrated that 10 μg/mL EMD regulated several hundred genes and stimulated the gene expression of proteins involved in mesenchymal proliferation and differentiation. Both EMD and DEX enhanced the expression of amelogenin (amel), and the dentinogenic markers dentin sialophosphoprotein (DSSP) and dentin matrix acidic phosphoprotein 1 (DMP1), as well as the osteogenic markers osteocalcin (OC, BGLAP) and collagen type 1 (COL1A1). Whereas, only EMD had effect on alkaline phosphatase (ALP) mRNA expression, the stimulatory effect were verified by enhanced secretion of OC and COL1A from EMD treated cells, and increased ALP activity in cell culture medium after EMD treatment. Increased levels of interleukin-6 (IL-6), interleukin-8 (IL-8), and monocyte chemoattractant proteins (MCP-1) in the cell culture medium were also found. Consequently, the suggested effect of EMD is to promote differentiation of pulp cells and increases the potential for pulpal mineralization to favor reactive dentine formation.     

Current–Voltage Characteristics of Cobalt-Doped Inversion Boundaries in Zinc Oxide Bicrystals

Undoped and cobalt-doped basal inversion boundaries were fabricated in ZnO bicrystals to investigate their current–voltage characteristics. High-resolution transmission electron microscopy observations and energy-dispersive X-ray spectroscopy analyses for a cobalt-doped bicrystal revealed that the boundary was highly coherent and free from intergranular phases and precipitates, but a certain amount of cobalt was present near the boundary. The cobalt-doped bicrystals exhibited nonlinear characteristics that depended on cooling rates from annealing temperature, in contrast to linear characteristics of the undoped bicrystals. It is suggested that the presence of cobalt impurities enhances the formation of acceptor-like native defects near the boundaries to generate electrostatic potential barriers.     

Annealing of commercial block polypropylene. II. Behavior of poly(ethylene-co-propylene) component

Moldings of ethylene–propylene block copolymer (block PP) are improved by annealing in their tensile impact strength (TIS) and brittle temperature (Tb). To elucidate the mechanism, the role of the poly(ethylene-co-propylene) (PEP) component was studied, and the component extracted with n-heptane from annealed test pieces was subjected to characterization by a fractionation technique. It is found that recrystallization takes place by annealing in the PP matrix and results in segregation of atactic PP and high molecular weight amorphous PEP from the crystal region to the amorphous region. Furthermore, crystalline PEP also undergoes recrystallization by annealing, increasing the miscibility in the interface of PP and PEP. These phenomena in the solid phase are discussed in connection with the annealing effect related to impact strength. © 1992 John Wiley & Sons, Inc.     

Halochromism of acrylic fibres dyed with some disperse dyes

Anomalous dyeing behaviour has been found when regular acrylic fibre treated in hydrochloric acid, in which the sulphonic acid group was present entirely in the acid form, was dyed in neutral condition with azo and anthraquinone disperse dyes. In the very early stages of dyeing there was an abnormally high degree of dye exhaustion, with bathochromic (azo) or hypsochromic (anthraquinone) colour changes on the fibre. These phenomena gradually disappeared after prolonged dyeing, with normal adsorption equilibria and colours eventually being obtained. The results were explained on the basis of protonation by the sulphonic acid groups of treated fibre which occurs at the azo nitrogen or the amino nitrogens of the substituents in the 1 — or 1,4-positions of anthraquinone. The normal adsorption equilibria after prolonged dyeing was attributed to hydrolysis of the cyano side group to form carboxylic acid. This produces ammonia to liberate neutral dye from the protonated dye cation adsorbed electrostatically by the sulphonic acid anion of the treated fibre.     

Broad range observation of particle deposition on greased and non-greased impaction surfaces using a line-sensing optical microscope

A computer-automated optical microscope combined with a line-sensing camera was used to capture the entire range of a particle deposit downstream of an individual acceleration nozzle in a hi-volume Andersen sampler. To investigate the particle bounce and reentrainment, particles collected on collocated greased and non-greased Teflon plates on the inlet stage (d_a>7 μm) were observed by an automated particle counting, locating and sizing method. The result confirmed reproducible collection characteristics among nozzles even though application of the grease increased collection efficiency and altered the size distribution of collected particles to the larger side. In these experiments, assuming spherical particles with uniform density, approximately 65% of particle mass and 50% by number were lost from non-greased plates at 54% RH, while 45% by mass and 25% by number were underestimated at 84% RH. The spatial investigation showed that particles were densely deposited around the center of deposition on greased plates while on non-greased plates they were dispersedly distributed. Particle dispersions on the smooth impaction plate were due to bounce and/or reentrainment of small particles especially with d_PA<10 μm.     

Oil-binding capacity of plastic fats: Effects of intermediate melting point TAG

The oil-binding capacity (OBC) of fat crystals was investigated as a function of intermediate melting point TAG (IMP-TAG) and stearin composition. Samples were prepared by melting 14% hard fraction (palm-canola stearin and IMP-TAG blends) in 86% liquid oil (olive, canola, safflower, and triolein) and crystallizing the mixture under fast and slow cooling conditions. Under fast cooling conditions, the OBC increased as the IMP-TAG/stearin ratio increased. The OBC is the grams of bound oil (determined by centrifugation) divided by the grams of solid fat (determined by pulse NMR). The maximum OBC was observed at 14% IMP-TAG and 0% stearin. In constrast, under slow cooling conditions, the 14% IMP-TAG and 0% stearin sample did not form crystals, and only free oil was present. The OBC for each liquid oil was lower under slow cooling conditions than under fast cooling conditions when compared at the same IMP-TAG/ stearin ratio. Solid fat content and RP-HPLC analyses indicated that IMP-TAG were retained in the crystal structure when processed under fast cooling conditions. RP-HPLC analyses also revealed that TAG with two saturated FA were retained in the crystal structure and that the monosaturated TAG were not. It was concluded that the TAG composition and cooling conditions played an important role in determining the OBC.     

Retuning oscillatory PID control loops based on plant operation data

This paper addresses an integrated identification and PID tuning procedure for chemical processes. Identification is done by comparing disturbance responses of two controllers with different parameter settings, and requires no explicit external perturbation signal. The PID tuning procedure employs loop-shaping approach, which does not assume any particular form of a transfer function, but requires only frequency characteristics for some critical range and is applicable for varieties of process dynamics. The proposed procedure is demonstrated on a simulated chemical plant to show its practical applicability.