15-Methyl-1,2-hexadecanediol,a major constituent of hamster surface wax

Long chain 1,2-alkanediol diesters comprise about 15–20% of the acetone soluble skin surface wax of golden Syrian hamsters. The constituent 1,2-alkanediols, obtained through acidic methanolysis, were fractionated by preparative gas liquid chromatography of their isopropylidene derivatives. The major component (57%) was identified by nuclear magnetic resonance and mass spectrometry as 15-methyl-1,2-hexadecanediol.     

Direct electron transfer of cytochrome P450 2B4 at electrodes modified with nonionic detergent and colloidal clay nanoparticles

A method for construction of biosensors with membranous cytochrome P450 isoenzymes was developed based on clay/detergent/protein mixed films. Thin films of sodium montmorillonite colloid with incorporated cytochrome P450 2B4 (CYP2B4) with nonionic detergent were prepared on glassy carbon electrodes. The modified electrodes were electrochemically characterized, and bioelectrocatalytic reactions were followed. CYP2B4 can be reduced fast on clay-modified glassy carbon electrodes in the presence of the nonionic detergent Tween 80. In anaerobic solutions, reversible oxidation and reduction is obtained with a formal potential between -0.292 and -0.305 V vs Ag/AgCl 1 M KCl depending on the preparation of the biosensor. In air-saturated solution, bioelectrocatalytic reduction currents can be obtained with the CYP2B4-modified electrode on addition of typical substrates such as aminopyrine and benzphetamine. This reaction was suppressed when methyrapone, an inhibitor of P450 reactions, was present. Measurement of product formation also indicates the bioelectrocatalysis by CYP2B4.     

Mortarless structures based on topological interlocking

We review the principle of topological interlocking and analyze the properties of the mortarless structures whose design is based on this principle. We concentrate on structures built of osteomorphic blocks – the blocks possessing specially engineered contact surfaces allowing assembling various 2D and 3D structures. These structures are easy to build and can be made demountable. They are flexible, resistant to macroscopic fractures and tolerant to missing blocks. The blocks are kept in place without keys or connectors that are the weakest elements of the conventional interlocking structures. The overall structural integrity of these structures depends on the force imposed by peripheral constraint. The peripheral constraint can be provided in various ways: by an external frame or features of site topography, internal pre-stressed cables/tendons, or self-weight and is a necessary auxiliary element of the structure. The constraining force also determines the degree of delamination developing between the blocks due to bending and thus controls the overall flexibility of the structure thus becoming a new design parameter.     

Heat Transfer Through the Interface and Flow Regimes in Liquid Bridge Subjected to Co-Axial Gas Flow

We present results of an extensive numerical study on the thermocapillary (Marangoni) convection and a heat transfer through the interface in a liquid bridge of Pr?=?68. The geometry of the physical problem is a cylindrical and non-deformable liquid bridge concentrically surrounded by an annular gas channel under conditions of zero gravity. The gas flow is co- or counter-directed with respect to the Marangoni flow. The forced gas flow along the interface provides two actions: via shear stresses and heat exchange. Usually the cooling of the interface enhances the flow while the heating slows down. This general trend may not hold when shear and thermocapillary stresses are comparable. The results show that when gas enters from the cold side the heat transfer through the interface is considerably larger than that when gas enters from the hot side.     

Ultrasonic nebulization-assisted layer-by-layer assembly for spray coating of multilayered, multicomponent, bioactive nanostructures

In this study, we describe a new technique for creating dense, stable, nanolayer coatings on solid substrates using ultrasonic nebulization. Nebulization-assisted layer-by-layer assembly (LbL) is a modification to the well-characterized LbL assembly method. The conventional method of producing electrostatically assembled multilayer films through sequential substrate dipping was compared to the nebulization method, and the resultant film characteristics were investigated. Varied coatings can be generated according to the alterations in deposition parameters, with the most influential being nebulizer distance and time. In addition to employment of polyelectrolytes (PEs), the nebulization method has been extrapolated to generate assemblies containing nanoparticles and a model drug, dexamethasone. It is shown that in comparison with conventional LbL, similar bilayers’ layering thicknesses can be achieved within a much smaller timeframe. Furthermore, PEs and more complex protein and nanoparticle assemblies can be incorporated to influence the surface topography and functionality. The potential to expeditiously assemble multicomponent films has far-reaching implications in many focus areas.     

Analysis of weakly bonded oxygen in HfO<Subscript>2</Subscript>/SiO<Subscript>2</Subscript>/Si stacks by using HRBS and ARXPS

We have used transmission electron microscopy, high-resolution Rutherford backscattering spectrometry (HRBS), and angle-resolved X-ray photoelectron spectroscopy (ARXPS) to investigate the interfacial oxidized states of hafnium oxide/silicon oxide/Si gate oxide stacks. The atomic concentrations and profiles of HRBS analysis are similar before and after annealing; however, ARXPS shows a clear difference in bond status. These results imply that weakly bonded oxygen atoms existed in the stacks alongside the suboxides. In the as-deposited layers, dioxides are found at the interfaces and suboxides in the layers whereas after annealing suboxides are found at the interfaces and dioxides are found in the layers because of redistribution of bonds during annealing. The combination of HRBS and ARXPS analyses indicated that the main oxidized states transformed from the suboxides to the dioxides with no obvious quantitative difference in the content of oxygen atoms, suggesting that reactions of the weakly bonded oxygen atoms occurred with the suboxides within the layers.     

Optical measuring systems and technologies for some urgent tasks in industry and science

Modern industry and science take novel optical measuring systems and laser technologies with high resolution and productivity for solving actual tasks,including safety problems for mining,oil,atomic and railway in-dustries.The TDI SIE's results in these trends are presented.     

Detection of RDX traces at the surface with sonic aerosol flow desorption

The use of a high-speed aerosol flow is proposed for sampling RDX from the surface followed by chromatographic analysis. The aerosol is generated from different solvents by means of a coaxial nebulizer. The effect of the aerosol flow parameters (solvent flowrate, an angle of the nebulizer inclination with respect to the surface) and various solvents (water, acetone, and hexane) on the efficiency of the RDX desorption was investigated. The optimal angle of the nebulizer was found to be 30°, under these conditions, the desorption of RDX from the surfaces of different structure (metal, glass, leather, cotton fabric, and paper) has also been studied. It is shown that under the action of an aerosol created using water and acetone, desorption from a smooth surface occurs most efficiently (1.5 times higher than with hexane). In this case, the sample removes almost completely (about 80%) by the aerosol flow in a few seconds. A relationship between the desorption efficiency and the amount of the solvent sprayed (that is the amount of aerosol particles in desorbing flow) has a characteristic maximum which location depends on the properties of the solvent spray. This effect is associated with a rate of solvent evaporation. Under optimal conditions for desorption of RDX from a smooth surface using an aqueous aerosol, an LOD of ～10?ng can be achieved. For porous and rough surfaces, the efficiency of the analyte desorption decreases (three times for leather and cotton fabric). The results of the experiments conducted allow one to conclude that the RDX solubility in the solvent used does not affect considerably the efficiency of the RDX desorption. It is assumed that small aerosol drops are very active and can capture the particles of the target analyte. This promotes the desorption of RDX molecules from the surface.

© 2018 American Association for Aerosol Research     

Engineering of a Biomimetic Interface between a Native Dental Tissue and Restorative Composite and Its Study Using Synchrotron FTIR Microscopic Mapping

The aim of this work is to develop a biomimetic interface between the natural tooth tissue and the restorative composite and to study it on the basis of synchrotron micro-FTIR mapping and multidimensional processing of the spectral data array. Using hierarchical cluster analysis of 3D FTIR data revealed marked improvements in the formation of the dentine/adhesive/dental hybrid interface using a biomimetic approach. The use of a biomimetic strategy (application of an amino acid–modified primer, alkaline calcium and a nano-c-HAp–modified adhesive) allowed the formation of a matrix that can be structurally integrated with natural dentine and dental composite. The biomimetic hybrid layer was characterised by homogeneous chemical composition and a higher degree of conversion of the adhesive during polymerisation, which should provide optimal integration of the dental composite with the dentine.