Effects of material thickness and processing method on poly(lactic-co-glycolic acid) degradation and mechanical performance

In this study, the effects of material thickness and processing method on the degradation rate and the changes in the mechanical properties of poly(lactic-co-glycolic acid) material during simulated physiological degradation were investigated. Two types of poly(lactic-co-glycolic acid) materials were considered: 0.12?mm solvent-cast films and 1?mm compression-moulded plates. The experimental results presented in this study were compared to the experimental results of Shirazi et al. (Acta Biomaterialia 10(11):4695–703, 2014) for 0.25?mm solvent-cast films. These experimental observations were used to validate the computational modelling predictions of Shirazi et al. (J Mech Behav Biomed Mater 54: 48–59, 2016) on critical diffusion length scale and also to refine the model parameters. The specific material processing methods considered here did not have a significant effect on the degradation rate and the changes in mechanical properties during degradation; however, they influenced the initial molecular weight and they determined the stiffness and hardness of the poly(lactic-co-glycolic acid) material. The experimental observations strongly supported the computational modelling predictions that showed no significant difference in the degradation rate and the changes in the elastic modulus of poly(lactic-co-glycolic acid) films for thicknesses larger than 100?μm.     

Classification of ceramics and glass (edge chipping and fracture toughness)

The standard classification of advanced ceramics is based on their strength, although in many cases the performance of products made of such materials is controlled by their deformation behavior and fracture resistance. In this article, ceramics and glass are classified according to their edge chipping resistance (EF-method). Such a classification is based on the idea of a baseline (direct proportionality between edge chipping resistance and fracture toughness of ceramics that are similar to the model material of linear elastic fracture mechanics). Use was made of various elastic and inelastic, oxide and non-oxide ordinary ceramics, composite ceramics capable and incapable of retarding cracks and intended for engineering and biomedical applications. Attention is also given to silicate glass.     

Stabilizing controllers for discrete bilinear systems

In this paper, we study stabilizing controllers for time varying bilinear systems. Here, the feedback function, f in our paper is for larger classes than those given in the current literature. We establish existence theorems for stabilizing bilinear systems by output feedback from a large class. The main theorems basically state that under broad conditions, the zero state of the systems can be made asymptotically stable by output feedback. Following these stabilizing theorems, a new design procedure for the feedback control law is presented. Application of the new theorems is illustrated by a simulation example.     

Narrow Genetic Diversity of Wolbachia Symbionts in Acrididae Grasshopper Hosts (Insecta,Orthoptera)

Bacteria of the Wolbachia genus are maternally inherited symbionts of Nematoda and numerous Arthropoda hosts. There are approximately 20 lineages of Wolbachia, which are called supergroups, and they are designated alphabetically. Wolbachia strains of the supergroups A and B are predominant in arthropods, especially in insects, and supergroup F seems to rank third. Host taxa have been studied very unevenly for Wolbachia symbionts, and here, we turn to one of largely unexplored insect families: Acrididae. On the basis of five genes subject to multilocus sequence typing, we investigated the incidence and genetic diversity of Wolbachia in 41 species belonging three subfamilies (Gomphocerinae, Oedipodinae, and Podisminae) collected in Turkey, Kazakhstan, Tajikistan, Russia, and Japan, making 501 specimens in total. Our results revealed a high incidence and very narrow genetic diversity of Wolbachia. Although only the strains belonging to supergroups A and B are commonly present in present, the Acrididae hosts here proved to be infected with supergroups B and F without A-supergroup variants. The only trace of an A-supergroup lineage was noted in one case of an inter-supergroup recombinant haplotype, where the ftsZ gene came from supergroup A, and the others from supergroup B. Variation in the Wolbachia haplotypes in Acrididae hosts within supergroups B and F was extremely low. A comprehensive genetic analysis of Wolbachia diversity confirmed specific features of the Wolbachia allelic set in Acrididae hosts. This result can help to elucidate the crucial issue of Wolbachia biology: the route(s) and mechanism(s) of Wolbachia horizontal transmission.     

填充了碳纳米管的连续纳米纤维的静电纺丝

<正>尽管在单壁碳纳米管(SWNTs)的合成和表征方面已经取得了重大进展,但还有一重大挑战,即寻找一条有效途径来接通纳米管及工程材料和结构之间的尺寸和性能的通道。为了将SWNT的超性能转化到中型和大型结构中,人们已经花费了很大精力来开发线性和平面SWNT组件。本文描述的静电     

A New Approach to Supertough Poly(lactic acid): A High Temperature Reactive Blending

A novel approach to PLA toughening is proposed in this study. Poly(lactic acid) (PLA) is toughened using poly(ethylene‐n‐butylene‐acrylate‐co‐glycydyl methacrylate) (EBA‐GMA) as a reactive compatibilizer with the aid of an epoxy‐based chain extender. It is found that the toughening effect of EBA‐GMA in the binary blend investigated is strongly influenced by blending temperature. Blending at high temperatures which are non‐typical for PLA processing (over 250 °C) allows toughness to be increased by an order of magnitude when compared to the toughness of blends prepared at low temperatures (below 200 °C). This effect is attributed to a combination of factors, namely an increasing rate of reactive bonding between PLA and EBA‐GMA at elevated temperatures and enhanced interfacial adhesion between PLA and EBA‐GMA phases. DSC studies show that PLA/EBA‐GMA bonding on the interface acts as an efficient nucleator for PLA. The nucleation ability of the PLA/EBA‐GMA interface strongly depends on blend processing temperature and gradually increases with increasing blending temperature. The PLA/EBA‐GMA interface shows its highest nucleation ability at 250 °C.

     

Glass–Ceramic Composites with Strontium Hexaferrite Ultrafine Particles in the SrO–Fe2O3–B2O3–SiO2 System

Glass samples with nominal compositions SrFe₁₂O₁₉+(12− n )SrB₂O₄+nSrSiO₃, n =3, 6, 9 were prepared by rapid quenching of the melt. Processes of glass devitrification were studied. The samples were annealed at temperatures of 600–900°C, and the resulting glass–ceramics was characterized by XRD, SEM, EDX, and magnetic measurements. SrFe₁₂O₁₉ crystallizes above 700°C and forms nano- and submicron platelet particles with the aspect ratio depending on the thermal treatment conditions. The glass–ceramic samples annealed at 900°C show coercive force values in the range of 422–455 kA/m.     

Hybrid Nanoparticles and Composite Hydrogel Systems for Delivery of Peptide Antibiotics

The growing number of drug-resistant pathogenic bacteria poses a global threat to human health. For this reason, the search for ways to enhance the antibacterial activity of existing antibiotics is now an urgent medical task. The aim of this study was to develop novel delivery systems for polymyxins to improve their antimicrobial properties against various infections. For this, hybrid core–shell nanoparticles, consisting of silver core and a poly(glutamic acid) shell capable of polymyxin binding, were developed and carefully investigated. Characterization of the hybrid nanoparticles revealed a hydrodynamic diameter of approximately 100 nm and a negative electrokinetic potential. The nanoparticles demonstrated a lack of cytotoxicity, a low uptake by macrophages, and their own antimicrobial activity. Drug loading and loading efficacy were determined for both polymyxin B and E, and the maximal loaded value with an appropriate size of the delivery systems was 450 µg/mg of nanoparticles. Composite materials based on agarose hydrogel were prepared, containing both the loaded hybrid systems and free antibiotics. The features of polymyxin release from the hybrid nanoparticles and the composite materials were studied, and the mechanisms of release were analyzed using different theoretical models. The antibacterial activity against Pseudomonas aeruginosa was evaluated for both the polymyxin hybrid and the composite delivery systems. All tested samples inhibited bacterial growth. The minimal inhibitory concentrations of the polymyxin B hybrid delivery system demonstrated a synergistic effect when compared with either the antibiotic or the silver nanoparticles alone.