Inkjet Printing of Self‐Assembled 2D Titanium Carbide and Protein Electrodes for Stimuli‐Responsive Electromagnetic Shielding

2D titanium carbides (MXene) possess significant characteristics including high conductivity and electromagnetic interference shielding efficiency (EMI SE) that are important for applications in printed and flexible electronics. However, MXene‐based ink formulations are yet to be demonstrated for proper inkjet printing of MXene patterns. Here, tandem repeat synthetic proteins based on squid ring teeth (SRT) are employed as templates of molecular self‐assembly to engineer MXene inks that can be printed as stimuli‐responsive electrodes on various substrates including cellulose paper, glass, and flexible polyethylene terephthalate (PET). MXene electrodes printed on PET substrates are able to display electrical conductivity values as high as 1080 ± 175 S cm^?1, which significantly exceeds electrical conductivity values of state‐of‐the‐art inkjet‐printed electrodes composed of other 2D materials including graphene (250 S cm^?1) and reduced graphene oxide (340 S cm^?1). Furthermore, this high electrical conductivity is sustained under excessive bending deformation. These flexible electrodes also exhibit effective EMI SE values reaching 50 dB at films with thicknesses of 1.35 µm, which mainly originate from their high electrical conductivity and layered structure.     

Synthesis and Characterization of 2D Molybdenum Carbide (MXene)

Large scale synthesis and delamination of 2D Mo₂CT _x (where T is a surface termination group) has been achieved by selectively etching gallium from the recently discovered nanolaminated, ternary transition metal carbide Mo₂Ga₂C. Different synthesis and delamination routes result in different flake morphologies. The resistivity of free‐standing Mo₂CT _x films increases by an order of magnitude as the temperature is reduced from 300 to 10 K, suggesting semiconductor‐like behavior of this MXene, in contrast to Ti₃C₂T _x which exhibits metallic behavior. At 10 K, the magnetoresistance is positive. Additionally, changes in electronic transport are observed upon annealing of the films. When 2 μm thick films are tested as electrodes in supercapacitors, capacitances as high as 700 F cm^?3 in a 1 m sulfuric acid electrolyte and high capacity retention for at least 10,000 cycles at 10 A g^?1 are obtained. Free‐standing Mo₂CT _x films, with ≈8 wt% carbon nanotubes, perform well when tested as an electrode material for Li‐ions, especially at high rates. At 20 and 131 C cycling rates, stable reversible capacities of 250 and 76 mAh g^?1, respectively, are achieved for over 1000 cycles.     

Dual interband cascade laser based trace-gas sensor for environmental monitoring

The development of an interband cascade laser (ICL) based spectroscopic trace-gas sensor for the simultaneous detection of two atmospheric trace gases is reported. The sensor performance was evaluated using two ICLs capable of targeting formaldehyde (H2CO) and ethane (C2H6). Minimum detection limits of 3.5 ppbV for H2CO and 150 pptV for C2H6 was demonstrated with a 1 s integration time. The sensor was deployed for field measurements of H2CO, and laboratory quantification of both formaldehyde and ethane are reported. A cross comparison of the atmospheric concentration data for H2CO with data collected by a collocated commercial H2CO sensor employing Hantzsch reaction based fluorometric detection was performed.These results show excellent agreement between these two different approaches for trace-gas quantification. In addition, laboratory experiments for dual gas quantification show accurate, fast response with no crosstalk between the two gas channels.     

Properties of the Anisimkin Jr.' modes in quartz plates

Dispersion curves, surface displacements, and displacement profiles over the plate thickness are numerically calculated for acoustic plate modes, propagating in fused and Y-rotated, X-cut quartz samples with thickness h/lambda in the range 0-4.5 (h, thickness; lambda, wavelength). The Anisimkin Jr.' modes with velocity v(n) close to that of longitudinal bulk wave v(L) and the dominant longitudinal displacement u1 distributed uniformly through the plate thickness are found in quartz crystals with cut angles mu = 120 degrees-140 degrees and plate thickness h/lambda = 0-0.36, 0.94-1.78, 2.32-3.08, and 3.64-4.44. The same modes in fused quartz are not found, except in a narrow region near zero thickness.     

Effect of aging on structure and properties of quenched alloy based on orthorhombic titanium aluminide Ti2AlNb

Phase and structural transformations that occur upon the aging of a titanium alloy based on the O phase have been investigated. The formation of a special type of arrangement (zigzag or packet ensembles) of the O-phase plates that arise in the course of the β → O transformation has been detected. Using transmission electron microscopy, the multistage character of structural changes during the α₂ → O transformation has been studied, and a schematic of the occurrence of the transformation has been proposed. The microdurometric characteristics of the indicated alloy that were obtained after different aging regimes have been estimated.     

Effects of material thickness and processing method on poly(lactic-co-glycolic acid) degradation and mechanical performance

In this study, the effects of material thickness and processing method on the degradation rate and the changes in the mechanical properties of poly(lactic-co-glycolic acid) material during simulated physiological degradation were investigated. Two types of poly(lactic-co-glycolic acid) materials were considered: 0.12?mm solvent-cast films and 1?mm compression-moulded plates. The experimental results presented in this study were compared to the experimental results of Shirazi et al. (Acta Biomaterialia 10(11):4695–703, 2014) for 0.25?mm solvent-cast films. These experimental observations were used to validate the computational modelling predictions of Shirazi et al. (J Mech Behav Biomed Mater 54: 48–59, 2016) on critical diffusion length scale and also to refine the model parameters. The specific material processing methods considered here did not have a significant effect on the degradation rate and the changes in mechanical properties during degradation; however, they influenced the initial molecular weight and they determined the stiffness and hardness of the poly(lactic-co-glycolic acid) material. The experimental observations strongly supported the computational modelling predictions that showed no significant difference in the degradation rate and the changes in the elastic modulus of poly(lactic-co-glycolic acid) films for thicknesses larger than 100?μm.