Optical CO2 sensor with the combination of colorimetric change of α-naphtholphthalein and internal reference fluorescent porphyrin dye

A new optical CO₂ sensor based on the overlay of the CO₂ induced absorbance change of pH indicator dye α-naphtholphthalein with the fluorescence of tetraphenylporphyrin (TPP) was developed. The observed luminescence intensity from TPP at 655 nm increased with increasing the CO₂ concentration. The ratio I₁₀₀/I₀ values of the sensing films consisting of α-naphtholphthalein in ethyl cellulose layer and TPP in polystyrene layer, where I₀ and I₁₀₀ represent the detected luminescence intensities from a layer exposed to 100% nitrogen and 100% CO₂, respectively, that the sensitivity of the sensor, are more than 53.9. The response and recovery times of the sensing films consisting of α-naphtholphthalein in ethyl cellulose layer and TPP in polystyrene layer were less than 5 s for switching from nitrogen to CO₂, and for switching from CO₂ to nitrogen. The signal changes were fully reversible and no hysterisis was observed during the measurements. The highly sensitive optical CO₂ sensor based on fluorescence intensity changes of TPP due to the absorption change of α-naphtholphthalein with CO₂ was achieved.     

Comparison of isolation methods using commercially available kits for obtaining extracellular vesicles from cow milk

Extracellular vesicles (EV) are important for delivering biologically active substances to facilitate cell-to-cell communication. Milk-derived EV are widely known because of their potential for immune enhancement. However, procedures for isolating milk-derived EV have not been fully established. To obtain pure milk-derived EV and accurately reveal their function, such procedures must be established. The aim of the present study was to compare methods using commercially available kits for isolating milk-derived EV. Initially, we investigated procedures to remove casein, which is the major obstacle in determining milk-derived EV purity. We separated whey using centrifugation only, acetic acid precipitation, and EDTA precipitation. Then, we isolated milk-derived EV by ultracentrifugation, membrane affinity column, size exclusion chromatography (SEC), polymer-based isolation, or phosphatidylserine-affinity isolation. Using EV count per milligram of protein, which is a good indicator of purity, we determined that acetic acid precipitation was the best method for removing casein. Using nanoparticle tracking analysis, protein quantity analysis, and RNA quantity analysis, we comprehensively compared each isolation method for its purity and yield. We found that SEC-based qEV column (Izon Science) could collect purer milk-derived EV at higher quantities. Thus, a combination of acetic acid precipitation and qEV can effectively isolate high amounts of pure extracellular vesicles from bovine milk.     

Endothelin ETB Receptor-Mediated Astrocytic Activation: Pathological Roles in Brain Disorders

In brain disorders, reactive astrocytes, which are characterized by hypertrophy of the cell body and proliferative properties, are commonly observed. As reactive astrocytes are involved in the pathogenesis of several brain disorders, the control of astrocytic function has been proposed as a therapeutic strategy, and target molecules to effectively control astrocytic functions have been investigated. The production of brain endothelin-1 (ET-1), which increases in brain disorders, is involved in the pathophysiological response of the nervous system. Endothelin B (ET_B) receptors are highly expressed in reactive astrocytes and are upregulated by brain injury. Activation of astrocyte ET_B receptors promotes the induction of reactive astrocytes. In addition, the production of various astrocyte-derived factors, including neurotrophic factors and vascular permeability regulators, is regulated by ET_B receptors. In animal models of Alzheimer’s disease, brain ischemia, neuropathic pain, and traumatic brain injury, ET_B-receptor-mediated regulation of astrocytic activation has been reported to improve brain disorders. Therefore, the astrocytic ET_B receptor is expected to be a promising drug target to improve several brain disorders. This article reviews the roles of ET_B receptors in astrocytic activation and discusses its possible applications in the treatment of brain disorders.     

Visualized measurement of extremely high-speed droplets in Venturi scrubber

Venturi scrubbers for filtered venting have been installed in nuclear power plants worldwide. Venturi scrubbers can eliminate fission products from a polluted gas by interaction through gas–liquid interfaces. Therefore, droplet diameter is important from the viewpoint of decontamination. When Venturi scrubbers are used in severe accidents, the gas flow velocity might be extremely high. In these studies, the authors did not measure droplet diameter under extremely high gas velocity conditions. In the scenarios, experimental data pertaining to droplet diameter, under the extremely high gas flow velocity, are required. Therefore, this objective is to evaluate the diameter of extremely high-speed droplets. A visualization experiment was conducted using a Venturi scrubber. The droplet diameter distribution and the Sauter mean diameter (SMD) were determined. By comparing between the experimental value of SMDs and the one evaluated using Nukiyama–Tanasawa equation, it was confirmed that the Nukiyama–Tanasawa equation can be used to evaluate SMD with good accuracy in the gas velocity range of 82–250 m/s, except the highest gas velocity conditions. Furthermore, the droplet generation mechanism in the Venturi scrubber was considered to clarify the main reason why the Nukiyama–Tanasawa equation can be used to evaluate SMD droplet diameter.     

Supramolecular morphology of two-step melt-spun poly(dioxanone) fibers

Structure of poly(dioxanone) (PPDX) fibers produced through a two-step melt-spinning process with an additional short-period annealing above the melting temperature of PPDX was investigated and the effect of annealing on the degradation behavior was discussed. The morphological study carried out by etching the fibers using a phosphate or permanganate solution suggested that the fibers take a skin–core structure, and both the skin layer and the core region consist of a bundle of microfibrils. The micro-beam X-ray diffraction analysis revealed that the short-period annealing in the production process only slightly promotes the crystallization in the skin layer but contributes to increasing the packing of amorphous chains near the skin, which seems to be the controlling factor of the hydrolytic degradation behavior of the fibers.     

Analysis of spatial smoothing effect of short‐term fluctuation of global solar radiation based on data including quantization error

Photovoltaic (PV) systems are attracting attention as one of the promising countermeasures against global warming and the environmental issues. However, the generation output from PV systems is generally unstable and unpredictable. Therefore, large penetration of PV systems may cause some serious impacts on power system operation, such as load frequency control, voltage regulation, etc. Estimation of the influences of PV system installation is becoming important, but it requires simultaneous multipoint solar radiation measurements. The Japan Meteorological Business Support Center has provided 1‐minute meteorological data observed in Japan, but its solar radiation data includes quantization errors. This paper proposes a regeneration method for solar radiation data including quantization errors. It also analyzes the spatial smoothing effect of global solar radiation fluctuations. © 2012 Wiley Periodicals, Inc. Electr Eng Jpn, 180(3): 55–63, 2012; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.21274     

First law analysis for viscous dissipation in liquid flows in micro-channels

This paper focuses on temperature rise due to the viscous dissipation in liquids flowing through micro-channels. In the past, equations for the prediction of the temperature rise have been obtained as a function of the friction factor, Reynolds number and Eckert number or a similar form, starting from Navier–Stokes equation and energy equation under the assumption of fully developed laminar flow by researchers. The temperature rises calculated from the equations have been compared with experimental data and the equations have been validated. However, in this paper, a new equation for the prediction of the temperature rise is simply obtained from the first law of thermodynamics without restriction of fully developed laminar flow.     

Preparation of ultrafine polyurethane fiber web by laser‐electrospinning combined with air blowing

Thermoplastic polyurethane fiber webs were prepared using a laser‐heated electrospinning process combined with air blowing. The effect of spinning conditions such as air flow rate and air temperature on fiber diameter and molecular weight was investigated. Although the average fiber diameter decreased with increased air flow rate at each air temperature, the diameter increased when the air flow rate was >15 NL min^?1. In addition, the fiber was comparatively thicker with an increase in the air temperature. The variation in the fiber diameter tends to increase with the air flow rate, and a reduction in the molecular weight of the fiber by thermal degradation was suppressed. The thinnest and most uniform fiber with a diameter of 0.9 µm and a diameter coefficient variation of 15% was obtained at an air temperature of 25°C under an air flow rate of 15 NL min^?1. This fiber also had a minimum of decreased molecular weight. POLYM. ENG. SCI., 54:2605–2609, 2014. © 2013 Society of Plastics Engineers