Polyunsaturated fatty glyceride syntheses by microbial lipases

The degree of glyceride syntheses by lipase TOYO (Chromobacterium viscosum) and lipase OF (Candida cylindracea) using individual free fatty acids C_18∶1, C_18∶2, C_18∶3, C_18∶4, C_20∶4, C_20∶5 and C_22∶6 were compared. Lipase TOYO incorporated each of the fatty acids into glycerol at levels of greater than 89%. Lipase OF incorporated most of the fatty acids at levels above 70% (docosahexaenoic acid incorporation was 63%). It was concluded that these two lipases are feasible for producing glycerides from unsaturated fatty acids.     

Ozonation of Several Organic Compounds Having Low Molecular Weight under Ultraviolet Irradiation

Ozonation of several low molecular weight organic compounds under ultraviolet irradiation was studied. Nine compounds were identified as reaction products of the ozonation of phenol which was promoted by the simultaneous use of ozone and ultraviolet irradiation. In the case of several organic compounds having carbon numbers from one to six, the removal of total organic carbon (TOC) by this simultaneous use was higher than by either the ozone oxidation method or the ultraviolet irradiation method for all the compounds.     

Design of low‐power all‐optical networks under the constraint of four‐wave mixing

In this paper, we propose a static lightpath establishment method to design low‐power all‐optical networks under the constraint of four‐wave mixing (FWM). Since the FWM causes nonlinear interchannel crosstalk, it degrades the communication quality of optical signals. The FWM crosstalk effect becomes strong in a fiber as the number of passing optical signals increases. Therefore, we should reduce the number of optical signals passing through the same fiber from the perspective of the FWM. Meanwhile, in order to enhance the power efficiency of optical amplifiers, which are deployed at each optical fiber, it is preferred that multiple optical signals are transmitted in the same fiber. In order to decrease the power consumption while keeping high communication quality, the proposed method statically selects routes, wavelengths, and fibers for each traffic demand, considering the FWM crosstalk effect and the usage efficiency of the optical amplifiers. We show the performance of the proposed method through numerical experiments.     

Sliding window protocol with selective-repeat ARQ: performance modeling and analysis

A sliding window mechanism is well known to be a convenient way to integrate cumulative acknowledgement and flow control functions in a simple manner. Hence, widely used reliable data-transfer protocols such as TCP-SACK and RLC utilize this sliding window mechanism in conjunction with a selective-repeat ARQ (automatic repeat request) function, namely, the selective-repeat sliding window protocol (SR-SWP). We demonstrate that SR-SWP yields a throughput restraint effect (TORE) in particular situations when packet losses occur. We propose an analytical performance model to represent the TORE in the case of heavy traffic. Using this model, we derive explicit forms of goodput and mean resequencing delay, which are fundamental qualities of service parameters. From numerical results, we demonstrate that the impact of TORE on the performance is not negligible for high packet-loss probabilities. Furthermore, we show that the SR-SWP model exhibits the lower goodput and the smaller mean resequencing delay than those obtained from the traditional SR-ARQ protocol model.     

Measurement of RF Transmission Mode in ITER Relevant EC H&;CD Transmission Line

The preliminary results of mode measurement in the ITER relevant 40 m long transmission test line composed from 63.5 mm diameter corrugated waveguides and miter bends are presented. The field patterns were measured by taking temperature profiles on a paper screen placed in front of the waveguide end using an infrared imaging camera. The complex electric field at the waveguide end was retrieved from the measured temperature profiles. As a result, the transmission power includes 87% of HE₁₁ mode and 6% of LP₁₁ odd (HE₂₁+TE₀₁) mode and small ratios of other modes. The mode content had small dependence on length of the transmission line. This result indicated that the higher order mode content generated at the input of the transmission line is conserved and propagated through the transmission line. This suggests that the initial RF coupling to the waveguide is critical since it affects the launcher efficiency.     

Multiphoton stimulated Compton laser

When Compton backscattering (head to head collisions) arises between a relativistic electron beam and one of two intense counterpropagating laser beams, electrons are mainly scattered by the laser beam from the reverse direction and can hardly interact with the other laser beam propagating in the same direction. Thus, the interaction of electrons with the latter laser beam, which induces stimulated Compton scattering, can be treated as a perturbation. With perturbation theory, we calculate the probability of stimulated emission and absorption of the photons by electrons in two intense counterpropagating laser beams. The results demonstrate that stimulated emission or absorption is significant only if the momenta of photons and the energy of the electron satisfy certain condition. We also formulate the gain coefficient of the multiphoton stimulated Compton laser, which is sensitive to the intensity of the pumping laser and the energy spread of the electron beam     

Control scheme for optimizing the interferometer phase bias in a symmetric-Mach-Zehnder-type all-optical switch

A control scheme for accurately optimizing (and also automatically stabilizing) the interferometer phase bias of symmetric-Mach-Zehnder (SMZ)-type ultrafast all-optical switches is proposed. In this control scheme, weak continuous-wave light is used as supervisory input light and its spectral power ratio at the switch output is used as a bipolar error signal. Our experimental results for 168-Gb/s 16:1 demultiplexing with a hybrid-integrated SMZ switch indicate the feasibility and the sensitivity of this control scheme.     

A low-impedance open-bitline array for multigigabit DRAM

The noise-generating mechanisms inherent in the open-bitline DRAM array using the 6F² (F: feature size) memory cells and techniques for reducing the noise are described. The sources of differential noise coupled to the paired bitlines laid out in two arrays are the p-well, cell plate, and the group of nonselected wordlines. It was found, by simulation and by experiment with a 0.13-μm 256-Mb test chip, that the level of noise is dramatically reduced by using a low-impedance array with careful layout featuring low-resistivity materials, tight bridging between pairs of adjacent arrays, and a small array, achieving a comparable level of noise to that seen in the twisted and folded-bitline array. On basis of these results, it turns out that the open-bitline array has a strong chance of revival in the multigigabit generation, as long as these noise reduction techniques are applied     

Dynamic lightpath establishment considering four-wave mixing in multifiber WDM networks

This paper proposes a dynamic lightpath establishment scheme considering four-wave mixing (FWM) in multifiber wavelength-division multiplexed (WDM) all-optical networks. The FWM is one of the most important physical impairments to be resolved in WDM networks because the FWM induces nonlinear inter-channel crosstalk and decays the performance of WDM networks. In WDM networks, data are transmitted via lightpaths. When the effect of FWM crosstalk is large, it is highly possible that data transmission fails even if lightpaths are correctly established. The proposed scheme aims to avoid not only the blocking of lightpath establishment but also the accumulation of FWM crosstalk by means of ingenious selection of routes, wavelengths, and fibers for lightpath establishment. In the proposed scheme, a route and a wavelength are selected for each lightpath based on wavelength availability and wavelength placement of established lightpaths. Furthermore, fibers on the route are selected based on estimated FWM power. In this paper, we show the effectiveness of the proposed scheme through simulation experiments.     

Standardization activities in the ITU for a QoE assessment of IPTV

This article gives an overview of the state of the art of objective quality assessment of audio and visual media and its standardization activities in the ITU. IPTV services are becoming one of the most promising applications over next generation networks. To provide end users with comfortable, stable, and economical services, QoE assessment methodologies for quality design and management are indispensable.