Detection of microsatellite instability in cancers by arbitrarily primed-PCR fingerprinting using a fluorescently labeled primer (FAP-PCR)

The microsatellite mutator phenotype (MMP), detected as a change in the number of repeating units in hundreds of thousands of microsatellite sequences in the tumor cell genome, underlies the carcinogenesis of a variety of tumors including sporadic and hereditary nonpolyposis colon cancers. This enhanced microsatellite instability was discovered using arbitrarily primed polymerase chain reaction (AP-PCR) fingerprinting of DNA from colon cancers. In this study, we found an arbitrary primer that can amplify multiple DNA fragments containing repeated sequences, including the poly A tracts found in the Alu repeats of the human genome. The combined use of primer labeling with fluorescence and an automated DNA sequencing analysis of AP-PCR products (FAP-PCR) detected alterations in fingerprint bands in all DNA samples previously determined to belong to the MMP. Fluorescent AP-PCR fingerprinting using this single arbitrary primer provides a convenient and efficient method for detecting tumor specific fingerprint alterations that are usually undetectable by conventional fingerprinting.     

Effect of MgO Addition on the Bondability and Interfacial Reaction between Dielectric and Glass-Ceramics for the Fabrication of Multi-Component Ceramic Substrates

Bondability and interfacial reaction between dielectric and insulator layers have been examined to obtain a basic understanding of bonding mechanisms. Lead-containing complex perovskite was used as a dielectric material. Two kinds of glass-ceramics were used as insulator material; lead borosilicate glass containing Al_2O3 (insulator A) and the same containing Al₂O₃ and M_gO (insulator B). Dielectric and insulator layers did not bond when insulator A was used. When insulator B was used, however, strong bonding was achieved between the two layers by firing the powder compacts at temperatures between 800° and 1000°C. Addition of M_gO to lead borosilicate glass increased the thermal expansion coefficient to that of the dielectric and enhanced the formation of reaction layers, resulting in good bonding. Two reaction layers were identified. The main reaction products were enstatite and bredigite for one layer contacting the dielectric, and enstatite and a compound with the same diffraction pattern as that of faujasite for the other layers contacting insulator B.     

Segmented chirped grating for coarse wavelength division demultiplexing with multimode optical fibers

A chirped grating segmented into partitions each having a constant blaze angle to use in a demultiplexer for coarse wavelength division multiplexing with multimode optical fibers is developed. Its designed configuration utilizes a resonance region to achieve high diffraction efficiency and large dispersion. The width, blaze angle, and diffraction order of each partition were optimized by vector diffraction analysis. The diffraction loss of the manufactured grating was less than 1.5 dB, and polarization-dependent loss was less than 0.6 dB within a wavelength width of at least 70 nm. It is confirmed that a demultiplexer with the developed chirped grating had a wide passband and low cross talk.     

Effects of insufficient air injection on methanogenic Archaea in landfill bioreactor

In this study, methanogenic Archaea diversity in an aerated landfill bioreactor filled with co-disposed incineration bottom ashes and shredded incombustible wastes was monitored and analyzed as a function of time using molecular techniques. Besides, the effects of insufficient air injection on the bioreactor performance and methanogenic diversity were evaluated thoroughly. Results indicated that rapid bio-stabilization of solid waste are possible with aerated landfill bioreactor at various oxygen and oxidation reduction potential levels. Slot-blot hybridization results of leachate samples collected from aerated landfill bioreactor showed that archaeal and bacterial activities increased as stabilization accelerated and bacterial populations constituted almost 95% of all microorganisms. The results of slot-blot hybridization and phylogenetic analysis based on 16S rRNA gene revealed that Methanobacteriales and Methanomicrobiales were dominant species at the beginning while substituted by Methanosarcina-related methanogens close to the end of the operation of bioreactor.     

Stress analysis with arbitrary body force by boundary element method

Linear stress analysis without body force can be easily carried out by means of the boundary element method. Some cases of linear stress analysis with body force can also be solved without the domain integral. However domain integrals are generally necessary to solve the linear stress problems with complicated body forces. This paper shows that the linear stress problems with complicated body forces can be solved approximately without the domain integral. In order to solve these problems, the domain is divided into small areas using contour lines of body force. In these areas, the distributions of body force are assumed approximately to satisfy the Laplace equation.     

Thermal conductivity and phonon scattering mechanisms in La#x2212;x#x2212;x#x2212;xMxCuO4

The thermal conductivity of high density La_2–xM_xCuO₄ (M=Ba, Sr) sintered materials was measured between 15K and 150K for the various concentrations of Ba and the phonon thermal conductivity was analyzed comparing with that of Nd_2–xCe_xCuO₄. The pretty large value for pure La₂CuO₄ was drastically diminished by substituting La by a small amount of Ba atoms especially at low temperatures. It was found that a new type of the phonon scattering center such as a two-level tunneling must be taken account of in order to explain the observed reduction.     

Fabrication of optics by use of plasma chemical vaporization machining with a pipe electrode

We figure optical surfaces by plasma chemical vaporization machining (CVM) with a pipe electrode, in which an rf plasma generated at the electrode tip under approximately atmospheric pressure moves over the surfaces. We propose a shaping method in which the movement of plasma on the surfaces can be determined. Flat and aspheric surfaces are successfully figured with the desired peak-to-valley shape accuracy of 0.1 microm. The root-mean-square roughness of the resultant surfaces is at the subnanometer level. These results confirm that the plasma CVM and the shaping method have the capability to fabricate optics with high accuracy.     

Aberration properties in a chirped grating for coarse wavelength division demultiplexing

We studied the imaging performance of a chirped grating for a demultiplexer designed for coarse wavelength division multiplexing using a wavefront aberration analysis and the ray tracing simulation. The demultiplexer was composed of a chirped grating, cylindrical lenses, and a waveguide. The best image point and the spot shape focused by the chirped grating were effectively calculated with the wavefront aberration. We applied the aberration analysis to design a waveguide to connect branched beams to photodetectors, and we confirmed the demultiplexing performance experimentally.     

The study of metal ion release and cytotoxicity in Co–Cr–Mo and Ti–Al–V alloy in total knee prosthesis – scanning electron microscopic observation

We surgically retrieved two cobalt(Co)–chromium(Cr)–molybdenum(Mo) and five titanium(Ti)–aluminum(Al)–vanadium(V) alloy knee prostheses from patients because of mechanical failure and pain. We examined the distribution of the small particles which were released from the Co–Cr–Mo and Ti–Al–V alloys using a backscattered scanning electron microscopy (SEM). In addition we analyzed the metals in the artificial knee joints and the tissues adjacent to them using energy dispersive X-ray spectroscopy (EDS). We demonstrated that a myriad of fine particles, produced by the abrasion of both Co–Cr–Mo and Ti–Al–V alloys, accumulated in the synovial cells. As Co–Cr–Mo alloys disintegrate easily in the cells, Co dissolves from the peripheral areas of them, although Cr remains within the cells. In contrast Ti–Al–V alloys are very stable in the synovial cells. From these findings we conclude that the Co–Cr–Mo alloys are hazardous to the body as the alloys release Co which enters the body. In contrast the Ti–Al–V alloys are very stable and are patently safer. Artificial joints, however, are still in considerable need of improvement.     

Fracture and deformation properties of Ni-Fe superalloy in cryogenic high magnetic field environments

The present paper includes experimental and analytical data on the fracture properties of a nickel-iron superalloy, a ferromagnetic austenite, at 4 K in magnetic fields of 0 and 6 T. The tensile, notch tensile and small punch tests are employed. A finite element analysis is also performed to convert the experimentally measured load-displacement data into useful engineering information. To interpret the results we review the available theory of the influence of magnetic field on the stress intensity factor for a crack in ferromagnetic materials.