一种宽范围输入的光伏并网逆变器

根据光伏阵列的特点,介绍了一种适用于宽范围输入电压的光伏并网逆变器.详细的介绍了该逆变器的结构及控制方法,分析了其在单级/两级光伏并网逆变器两种工作模式下切换的原理.搭建了实验样机,实验结果验证了方案的可行性.     

地月系共线平动点Halo轨道族的运动稳定性研究

地月系共线平动点附近的Halo轨道族,能够提供从L1点至月球再至L2点的广泛空间的多种轨道应用需要,但2个轨道族内轨道的稳定性差异较大。文章引入稳定系数和线性稳定阶数2个指标来判断轨道的稳定性,并用数值模拟分别分析了百米和千米量级的初始轨道误差在数天后所引起的轨道偏差,得出结论：两轨道族内接近平动点的部分轨道稳定性较差,其余部分轨道稳定性相差不大,L1点附近Halo轨道族内轨道较为稳定的是0.85~0.92之间的轨道,L2点较为稳定的是1.02~1.1之间的轨道。     

H_2-THF水合物形成过程研究

利用定容恒温法研究了H2-5.56 mol%THF-水在2℃,不同压力下的水合物形成特性,比较2种不同的氢气水合物形成方法:1)氢气-THF水溶液体系;2)氢气-THF水合物颗粒体系,考察形成过程,并计算储氢量。实验结果表明,在上述条件下,不同的方法氢气水合物的形成速率不同,第2种方法下氢气水合物的形成速率相对较快,且储氢量也高,约为质量分数0.33%,2种体系下的储氢量均随着压力的增高而增加。最后对2个体系下的氢气水合物的形成机理进行分析。     

我国酒店业网络营销的现状及策略研究

酒店开展网络营销,就是对未来客源市场的战略考虑,是酒店进行市场竞争、实现酒店可持续性发展和建立酒店品牌意识的需要。借助网络的信息化平台开展酒店营销,已成为酒店竞争的新内容。然而,从我国酒店业的网络营销现状来看,还存在许多问题。针对这些问题,本文运用归纳和系统分析的方法,阐述了我国酒店业网络营销的现状,分析了我国酒店业开展网络营销的必要性以及存在的问题,提出了在新的形势下我国酒店业开展网络营销的相应策略。     

片状和颗粒状γ-Bi2MoO6的水热合成及可见光催化性能

采用水热法及柠檬酸辅助水热法分别制备了片状的和颗粒状的γ-Bi2MoO6,利用X射线粉末衍射(XRD)、场发射扫描电子显微镜(FESEM)和UV-vis漫反射光谱(DRS)对产物进行了表征和检测,探讨了片状的和颗粒状的γ-Bi2MoO6可能的形成机理.以太阳光为光源对结晶紫溶液进行光催化降解.实验结果表明:颗粒状的γ-Bi2MoO6的光催化活性略优于片状的γ-Bi2MoO6.     

Axial bearing capacity of short FRP confined concrete-filled steel tubular columns

The bearing capacity of FRP confined concrete-filled steel tubular (FRP-CFST) columns under axial compression was investigated. This new type of composite column is a concrete-filled steel tube (CFST) confined with fiber-reinforced polymer (FRP) wraps. Totally 11 short column specimens were tested to failure under axial compression. The influences of the type and quantity of FRP, the thickness of steel tube and the concrete strength were studied. It was found that the bearing capacity of short FRP-CFST column was much higher than that of comparable CFST column. Furthermore, the formulas for calculating the bearing capacity of the FRP-CFST columns are proposed. The analytical calculated results agree well with the experimental results.     

Photocatalytic performance of TiO<Subscript>2</Subscript> thin films connected with Cu micro-grid

Aiming at reducing the recombination of photo-induced carriers in semiconductor photocatalytic process, we prepared TiO₂ thin film with its surface modified by a connected Cu micro-grid via a microsphere lithography strategy, which showed higher photocatalytic activity than the pure TiO₂ film. The improvement of photocatalytic activity of Cu micro-grid to the TiO₂ film is due to the charge carrier separation and electron transfer by the conducting metal grid. The photocatalytic activity was improved as metal loading increased, which obtained the best performance at a certain loading amount, and then decreased at higher loading amount. This phenomenon was attributed to the metal’s bulk effect which could be explained by the relationship between the energetic positions and the metal cluster size. Supported by the National Natural Science Foundation of China (Grant Nos. 50672003, 50872005) and the National Basic Research Program of China (“973” Project) (Grant No. 2007CB613302) and the Fok Ying Tong Education Foundation (Grant No. 111050)     

Mold deformation in soft UV-nanoimprint lithography

UV-nanoimprint lithography (UV-NIL) using a soft mold is a promising technique with low cost and high throughput for producing the submicron scale large-area patterns. However, the deformations of the soft mold during imprinting process which can cause serious consequences have to be understood for the practical application of the process. This paper investigated the deformation of the soft mold by theoretical analyses, numerical simulations, and experimental studies. We simulated the mold deformation using a simplified model and finite element method. The simulation and the related experimental results agree well with each other. Through the investigation, the mechanism and affected factors of the mold deformation are revealed, and some useful conclusions have been achieved. These results will be valuable in optimizing the imprinting process conditions and mold design for improving the quality of transferred patterns.     

多层次、创新型实验教学体系的构建

实验室是高等学校进行教学和科研的重要基地,也是培养学生动手能力和创新能力的重要场所。就如何建设和完善多层次、创新型实验教学体系提出了一些改进措施,以此提高学生的创新能力和实践能力,促进实验室的可持续发展。     

磨料表面镀覆对陶瓷结合剂超硬磨具强度的影响

在陶瓷结合剂超硬磨具的烧结过程中，超硬磨料易受到陶瓷结合剂中某些成分的腐蚀或受到热损伤，在超硬磨料表面涂覆一层保护层，既可减轻或避免腐蚀和热损伤，还可改善磨料与结合剂之间的结合状况。文章主要对各种镀层的金刚石、CBN磨料与陶瓷结合剂按一定的比例热压烧结进行了分析说明，并测定了其抗折强度，研究了各镀层对磨具抗折强度的影响。