FC-AE-ASM网络的模糊可靠性研究

针对目前FC-AE-ASM(fibre channel avionic environment anonymous subscriber messaging)网络可靠性计算问题, 以网络任务模型为基础, 提出了FC-AE-ASM网络的模糊可靠性模型。该模型主要分析了FC-AE-ASM网络的三种基本拓扑, 得出了这三种结构的模糊可靠性表达式。同时, 结合串并联的推导方法, 推导出了FC-AE-ASM冗余网络的模糊可靠性计算式。对实例的计算结果表明, FC-AE-ASM网络模糊可靠性的改善取决于关键因素, 并且基本路径冗余网络在自身网络可靠性较高时与全网冗余网络性能基本相同。     

基于专家主观信息的学术期刊评价方法研究

该文侧重于学术期刊定性属性的评价方法研究。学术期刊定性属性特征通常具有模糊性,因而往往需要由专家给出主观判断。通过建立基准语言等级评价集合,提出了将专家给出的关于各定性属性的主观评价信息规范化为基准语言等级评价集合并集成的综合评价方法。最后通过计算可以得到学术期刊的综合评价值,进而使得学术期刊评价尽可能的公平化。     

SE-I型混凝剂在水处理中的应用

利用透射电镜和微孔滤膜超滤法研究了SE -I和PAC混凝剂的结构形貌和相对分子质量分布情况 ;比较了SE -I和PAC混凝处理油田含油废水、煤矿矿井废水和水库水的效果。实验结果表明 ,SE -I较PAC具有更大的枝化度和相对分子质量 ,体现在水处理效果上是SE -I较PAC有更好的除油、除浊、去除COD和脱色效果。SE -I型混凝剂是一种高效水处理剂     

Free radical grafting of glycidyl methacrylate onto polypropylene in a co-rotating twin screw extruder

Free radical grafting of glycidyl methacrylate (GMA) onto molten polypropylene (PP) was studied in a co-rotating twin screw extruder. Grafting yields of GMA obtained under various experimental conditions along the screw length allowed for a good appreciation of the effects of chemical parameters (the presence of styrene and the concentrations of peroxide and monomers) and those of processing parameters (feed rate, screw speed, and specific throughput). Similar to the results obtained in a batch mixer,¹ free radical grafting of GMA carried out in the extruder in the presence or absence of styrene proceeded rapidly, as it was virtually completed half-way down stream of the extruder. Additionally, the presence of styrene as a second monomer increased the GMA grafting yield reatly with reduced PP chain degradation. The ultimate GMA grafting yield increased with increasing concentration of peroxide, 1,3-bis(tert-butylperoxyisopropyl)benzene. This similarity between the batch mixer and the extruder is related to the fact that in both cases it is the concentration of the peroxide and its half lifetime that determine the grafting rate and the ultimate grafting yield. On the othe hand, the GMA grafting yield decreased with increasing screw speed or feed rate. For a particular specific throughput (the ratio of throughput to screw speed), an increase in throughput with a concomitant increase in screw speed brought about a decrease in GMA grafting yield. It was concluded that the GMA grafting yield is affected primarily by the residence time in the zone in which free radicals are not depleted. The effects of screw speed, feed rate, and specific throughput manifest mainly through this local residence time distribution. Specific energy is not a good measure of the performance of the extruder with respect to the free radical rafting of GMA onto PP. © 1995 John Wiley & Sons, Inc.     

硅烷处理N2O氧化苯生产苯酚催化剂抑制结碳失活研究

The main cause to the deactivation of ZSM-5 catalyst, used for oxidation of benzene to phenol (BTOP) by nitrous oxide, is that the carbon deposition on the catalyst surface blocks the mouth of pores of the catalyst.In the experiments, ZSM-5 catalyst was modified by chemical surface deposition of silicon, and then the effect of modification condition on the catalyst activation was studied. The catalyst samples were characterized by XRF,EPS, XRD, TEM, N2 adsorption at low temperature, pyridine adsorption-infrared technique and etc. All the above results show that the uniform SiO2 membrane can be formed on ZSM-5 crystal surface. The SiO2 membrane covers the acid centers on ZSM-5 surface to inhibit surface coking, to avoid or decrease the possibility of ZSM-5 pore blockage so that the catalyst activity and stability can be improved efficiently. The optimum siliconiting conditions determined by the experiments are as follows: 4% load of silanizing agent, volume (ml)/mass (g) ratio of hexane/ZSM-5=15/1, and 16 h of modification time. Compared with the samples without siliconiting treatment,the samples treated under the above optimum condition can increase the productivity of phenol by 14% for 3 h reaction time and by 41% for 6 h reaction time respectively.     

水泥库圆形钢筋混凝土筒壁结构施工技术

圆形混凝土护壁结构在水泥生产线中是一种常见形式,如何根据实际施工条件,合理地组织施工,对施工工期、质量、安全、成本都有积极重要影响。对施工中的关键技术和难点问题进行了阐述。     

磁西勘查区主采煤层煤层气赋存特征

据勘探研究磁西勘查区主采煤层既是煤层气源岩,又是其储集层,煤层有机显微组分以镜质组为主,煤的变质程度为中~高变质的烟煤~无烟煤,生气量较高,为高瓦斯矿区。本区以正断层为主,断层使煤层与泥质岩层接触,具有一定的封闭性。煤层埋深较大,主采2号煤层直接顶板为泥岩、粉砂岩,岩性致密,透气性较差,有利于煤层气资源的保存,从而使煤层气含量升高。     

双子表面活性剂合成及在酒精废液处理中应用

合成了4种碳链长度的酯基阳离子双子表面活性剂,并作为絮凝剂对干法工艺处理的玉米酒精糟废液进行了絮凝处理实验。絮凝后对废液的透光率及COD进行了测定,考察了在不调节pH值及室温条件下与双子表面活性剂、淀粉阳离子、壳聚糖阳离子对比絮凝处理效果,双阳离子表面活性剂好于淀粉阳离子、壳聚糖阳离子的絮凝能力;同时考察了酯基阳离子双子表面活性剂碳链长度对絮凝效果的影响,碳链长度对COD去除率的高低顺序为C14>C16>C12>C10。实现了不用碱中和废液而直接进行絮凝处理的工艺改造。     

非饱和膨胀土水分迁移的试验研究

在等温条件下,分组对不同初始干-湿段土体含水量、不同时间间隔对非饱和膨胀土的气态水迁移和气液态水混合迁移的规律及其关系进行试验研究,揭示了其随时间的变化过程。试验结果表明,土质情况、含水量水平及含水量梯度对其有重要影响,气态水迁移量与气液混合迁移量都随含水量梯度增加而增加,与时间和位置呈复杂的非线性关系;含水量较小时,土粒对水分的吸附能力较强,致使含水量梯度较大,含水量较大时,土粒周围自由水较多,水分分布较均匀。     

膜用功能单体5-氯磺酰异酞酰氯(CSIC)的合成研究

5-氯磺酰异酞酰氯是合成聚酰胺类反渗透膜、纳滤膜的重要功能单体.采用以3,5-二羧基苯磺酸钠为原料,五氯化磷为氯化剂,制备5-氯磺酰异酞酰氯(CSIC),最佳收率可达71.4%.通过对反应温度、反应时间和反应底物配比等影响因素的研究发现:常压下反应温度应控制在170～180℃;反应时间12.5 h后,结束反应;反应底物配比n(五氯化磷)∶n(3,5-二羧基苯磺酸钠)1∶1,则收率很低.随着n(五氯化磷)∶n(3,5-二羧基苯磺酸钠)增大,收率增高,当n(五氯化磷)∶n(3,5-二羧基苯磺酸钠)2.5∶1后,其增大对产品收率影响不大.