模糊综合评价方法在桥型多方案选择中的应用

为了解决现阶段桥型多方案选择中过多依赖设计者经验,而不可避免的带来主观性与片面性的问题.针对桥型方案选择的多因素与模糊性特征,提出了模糊综合评价方法在桥型多方案选择中的应用,确定了影响桥梁选型的指标体系,介绍了该方法的应用模型与步骤,并结合实例详细介绍了这种方法的应用过程.结果验证了这一方法的简明性和实用性.有利于减少桥梁型式选择的失误,提高其客观性与合理性,以得出最佳方案.     

无烟煤熔融盐催化气化反应特性研究

根据煤催化气化原理及熔融盐特性,设计了一套小型熔融盐催化煤气化实验装置。针对无烟煤燃烧特性差的特点,在实验中研究了温度和二氧化碳流量对气化结果的影响,并对影响机理进行分析。     

水电站月度调度函数的模型制定与模拟结果评价

基于统计学中多元逐步回归原理建立了多年调节水电站分月调度函数模型,并根据水电站优化调度特征确定待选自变量,用以指导电站实际优化调度运行。在考虑电站自身各约束及综合利用要求的前提下,进一步采用程序设计模拟调度函数指导水电站长系列调度运行,通过对模拟结果的全面评价,证实所建立的调度函数具有良好的指导意义和实用价值。     

互联电力系统未知机理低频振荡分析

近年来,我国互联电力系统多次发生低频振荡。针对南方互联电网"5.13"功率振荡,首先采用特征值分析法详细分析南方互联电网低频振荡特性,得出主要振荡模式以及发电机组参与因子和模态分布图。其次利用仿真软件PSS/E,对强相关机组的切机、三相短路故障以及原动机周期扰动分别进行时域仿真,并与实际振荡曲线进行对比。结果表明,南方电网此次功率振荡不是因为强相关机组电气侧故障,采用负阻尼机理也不能很好地解释,其产生原因可能是发电机组受原动机周期扰动有关。     

Experimental study on temperature stress calculation and temperature control optimization of concrete based on early age parameters

Temperature control curve is the key to achieving temperature control and crack prevention of high concrete dam during construction,and its rationality depends on the accurate measurement of temperature stress.With the simulation testing machine for the temperature stress,in the present study,we carried out the deformation process tests of concrete under three temperature curves：convex,straight and concave.Besides,we not only measured the early-age elastic modulus,creep parameters and stress process,but also proposed the preferred type.The results show that at early age,higher temperature always leads to greater elastic modulus and smaller creep.However,the traditional indoor experiments have underestimated the elastic modulus and creep development at early age,which makes the calculated value of temperature stress too small,thus increasing the cracking risk.In this study,the stress values of the three curves calculated based on the strain and early-age parameters are in good agreement with the temperature stress measured by the temperature stress testing machine,which verifies the method accuracy.When the temperature changes along the concave curve,the law of stress development is in consistent with that of strength.Under this condition,the stress fluctuation is small and the crack prevention safety of the concave type is higher,so the concave type is better.The test results provide a reliable basis and support for temperature control curve design and optimization of concrete dams.     

基于L1输出反馈自适应方法的火箭姿态控制

针对运载火箭刚—弹耦合动力学模型,开展了基于L1输出反馈自适应方法的火箭姿态控制器设计.考虑到L1控制器低通滤波器环节可能在一定程度上减少弹性影响,分析了火箭不同低频模态对控制系统的影响情况.由于低通滤波器带宽与系统带宽存在相互制约关系,当无法通过低通滤波器设计消除低阶弹性影响时,结合校正网络设计L1输出反馈控制器.仿真结果表明,上述设计思路能够应对火箭低阶弹性问题,所设计的控制器控制效果良好,且在弹性频率变化时系统依然具有良好的暂态和稳态性能.     

Incremental join view maintenance on distributed log-structured storage

Modern database systems desperate for the ability to support highly scalable transactions and efficient queries simultaneously for real-time applications. One solution is to utilize query optimization techniques on the on-line transaction processing (OLTP) systems. The materialized view is considered as a panacea to decrease query latency. However, it also involves the significant cost of maintenance which trades away transaction performance. In this paper, we examine the design space and conclude several design features for the implementation of a view on a distributed log-structured merge-tree (LSMtree), which is a well-known structure for improving data write performance. As a result, we develop two incremental view maintenance (IVM) approaches on LSM-tree. One avoids join computation in view maintenance transactions. Another with two optimizations is proposed to decouple the view maintenance with the transaction process. Under the asynchronous update, we also provide consistency queries for views. Experiments on TPC-H benchmark show our methods achieve better performance than straightforward methods on different workloads.     

大内跨小边跨框架结构预应力筋优化布置方法

预应力筋的优化布置是大内跨小边跨的多跨预应力混凝土框架结构合理设计计算的关键.为满足控制截面承载力最大的需要,以往常将大跨所需预应力筋布置为连续曲线,并按水平直线延伸通过其相邻的两小跨,按这种布置方式仅使大跨内产生竖向向上的预应力等效荷载,可较好平衡大跨的竖向外荷载;而若将大跨及相邻的两小跨统一考虑,预应力筋按连续曲线布置,张拉产生的预应力等效荷载不但可有效平衡大跨的竖向外荷载而且也可平衡小跨的竖向外荷载,可以使荷载平衡得到优化实现.以一典型工程为例,分析了在相同条件下两种预应力筋布置过程中张拉引起的综合弯矩、主弯矩和次弯矩的分布和量值上差异,比较了两类布筋形式对正截面承载力计算结果的影响,验证了对大内跨小边跨框架结构统一考虑后整体上按三段连续正反抛物线预应力筋布置的合理性.     

Bone Tissue Response to the Bone-like Tissue Coating on Titanium

The objective of this study was to investigate the effects of mineralized bone nodules, formed in vitro by bone marrow stromal cells(BMSCs), on the new bone formation in bone defect and on implant surface. The mineralized bone nodules were generated by culture of Lewis rats BMSCs on titanium disks in osteogenic induction medium. The gap-healing animal model was used to create the bone defect facing the disk. The titanium disks in the presence of B group or in the absence of NB group bone nodules were randomly placed into one of the rat distal femurs. This self-control design was used to compare the bone formation in defects and on titanium surface, by Micro-CT, fluorescence staining, histological and histomorphometric analysis. The new bone formation parameters in bone defect area of B group were significantly higher than those of NB group at 2 weeks, including bone volume fraction, trabecular thickness and bone area ratio. The bone nodules pre-stained with Alizarin red disappeared mostly at 2 weeks, while the red fluorescence reappeared in the newly formed bone away from the disk surface. For the bone-implant contact, B group showed lower values than NB group at 2 weeks, but no significant difference was found at 4 weeks. Our results indicate that the mineralized bone nodules can be resorbed in vivo and promote the early osteogenesis in the bone defects, and bone nodules may be applicable for new bone generation in bone defect or modification of tissue engineering scaffold.     

智能电网中电动汽车充电的自适应电价控制方法

针对电动汽车的充电提出一种电价控制策略。聚合管理者集中管理电动汽车的电池,并且考虑用电高峰时电网的电能供给有限,通过电价控制调整充电的需求量。采用自适应动态规划,通过在线网络训练,得到最优的电价策略。仿真结果表明,该自适应电价控制方法能够通过学习电动汽车的移动性和充电过程,从而调整实际充电需求量至期望水平,保证智能电网的稳定运行。