直线电机抽油机与游梁式抽油机性能对比

攻克了直线电机大推力的关键技术,研制成功了具有国际领先水平的直线电机抽油机。这种抽油机最大特点是改变了过去各种抽油机将电能转变为旋转运动,再通过机械方式转变为直线往复运动的方式,通过变频和控制直接将电能转变为直线往复运动。与游梁式抽油机相比,直线电机抽油机不但提高了机械效率,而且能够实现抽汲参数的无级调整,进而能够根据抽油的需要调整悬点运动规律,具备智能化控制和远程监控的有利条件。     

没有SDC的(t，n)门限秘密共享方案

利用椭圆曲线离散问题对数问题的难解性,给出了基于椭圆曲线密码体制的(t,n)门限秘密共享方案。基于门限秘密共享方案一般分为需要SDC和不需要SDC两类,在分布式环境下,一个被所有成员信任的SDC并不存在,不需要SDC的门限秘密共享方案的安全性得到很大的提高,该方案中由组成员共同生成群公钥和私有密钥。并给出了当新成员加入时,无SDC下的周期密钥分片的更新方案。还给出了一个本方案数据实例,最后对本方案的安全性进行了分析。     

Laterally coupled buried heterostructure high-Q ring resonators

All-buried InP-InGaAsP ring resonators laterally coupled to bus waveguides are demonstrated. The buried configurations offer a lower built-in refractive index step along the resonator periphery, which affords enhanced optical coupling coefficients between the waveguides and reduced scattering losses caused by the resonator sidewall imperfections. Very low optical intensity attenuations of 0.4 cm/sup -1/ and coupling-limited quality factors of greater than 10/sup 5/ are observed from 200-/spl mu/m-radii ring resonators. The measured spectral linewidth is as narrow as 0.0145 nm.     

Spectral shape tunable band-rejection filter using a long-period fiber grating with divided coil heaters

We have developed a new type of tunable band rejection filter, which provides high spectral-shaping flexibility in a wide tuning range. The filter consists of a long-period fiber grating (LPFG) with divided coil heaters. Each of the divided coil heaters is controlled individually to adjust a temperature distribution along the LPFG and to modify the spectral shape of the LPFG filter. The tunable band rejection filter is demonstrated to function properly when applied as an erbium-doped fiber amplifier gain-flattening filter.     

Iterative detection/decoding for two-track partial response channels

In this letter, we investigate the iterative detection/decoding algorithms for two-track partial response channels. We first describe the iterative algorithm as an iterative message-passing/processing algorithm over a high-level normal graph and then propose two trellis-based detection algorithms. The natural one is based on a joint trellis, which can be implemented for low-order channels. For moderate-order channels, we propose a separated detection, which is based on two single-track trellises. Compared with the joint detection, the separated detection is simpler in most cases. Simulation results show that, for two-track EPR4 channels with minor intertrack interferences, the separated detection causes only marginal degradation in performance.     

设计管理信息系统的提出及其面临的问题

从管理和设计的两个方面出发，通过对现代企业产品设计管理信息系统的探讨，阐明了设计管理信息系统的概念和结构；并对其实施的条件及面临的困难进行了系统的分析。     

Studies on high density polyethylene (HDPE) functionalized by ultraviolet irradiation and its application

The structure and properties of high density polyethylene (HDPE) functionalized by ultraviolet irradiation at different light intensities in air were studied by electron analysis, FTIR spectroscopy, contact angle with water, differential scanning calorimetry and mechanical properties measurement. The results show that oxygen‐containing groups such as C?O, C—O and C(?O)O were introduced onto the molecular chain of HDPE following irradiation, and the rate and efficiency of HDPE functionalization increased with enhancement of irradiation intensity. After irradiation, the melting temperature, contact angle with water and notched impact strength of HDPE decreased, the degree of crystallinity increased, and their variation amplitude increased with irradiation intensity. Compared with HDPE, the yield strength of HDPE irradiated at lower light intensity (32 W m^?2 and 45 W m^?2) increases monotonically with irradiation time, and the yield strength of HDPE irradiated at higher light intensity (78 W m^?2) increases up to 48 h and then decreased with further increase in irradiation time. The irradiated HDPE behaved as a compatibilizer in HDPE/polycarbonate (PC) blends, and the interface bonding between HDPE and PC was ameliorated. After adding 20 wt% HDPE irradiated at 78 W m^?2 irradiation intensity for 24 h to HDPE/PC blends, the tensile yield strength and notched Izod impact strength of the blend were increased from 26.3 MPa and 51 J m^?1 to 30.2 MPa and 158 J m^?1, respectively. Copyright © 2003 Society of Chemical Industry     

渤海绥中油田J3井疏水缔合聚合物驱数值模拟研究

为了进一步提高渤海油田J3井区缔合聚合物驱的技术经济效果,在渤海油田室内配方和先导性矿场试验研究基础上,利用化学驱油藏数值模拟软件FAPMS,分析和研究了高浓度缔合聚合物前置段塞、主段塞的大小和浓度以及段塞组合方式对驱油效果的影响,优化设计了渤海绥中油田J3井区块矿场试验的最佳注入程序及段塞大小。结果表明,通过对不同浓度的疏水缔合聚合物注入的前置段塞及主段塞和梯度式后续段塞的优化后,原油采收率比未优化时提高了约10个百分点。研究表明,渤海油田应该高度重视聚合物驱的注入方式和段塞优化设计,进一步提高聚合物的技术经济效果。     

宽带综合IP网的MPLS技术及其应用

多协议标记交换（MPLS）技术是综合利用网络第二层交换技术的有效性和第三层IP路由的灵活性等优点而产生的多层交换技术。通过在传统的IP包里加入标记，使路由转发依赖于标记，大大地提高IP包的转发速度，同时可使传统IP网络具有服务质量（QoS）能力。现主要分析MPLS体系结构，指出MPLS的一些应用。     

FCC汽油叠合生产柴油的研究——(Ⅰ)叠合催化剂的研制

采用中孔γ-Al2O3为载体，以非贵金属Ni为活性金属组分，以金属Sn为助剂组分，制备了FCC汽油叠合生产柴油的催化剂。在实验室小型连续流动式固定床装置上，以FCC汽油为原料，考察了主活性金属负载量、助催化剂、催化剂制备条件对催化剂性能的影响。研究结果表明，在活性金属Ni质量分数为8％，助催化剂Sn质量分数为1％，浸渍时间6h，焙烧温度500℃，焙烧时间4h的条件下，制备的叠合催化剂的催化性能最好。并对催化剂进行了1500h的稳定性试验和再生性能考察，结果表明该叠合催化剂具有良好的稳定性和再生性能。