The dependence of the creep properties of din 1.4970 austenitic stainless steel at 973 K on different thermomechanical pre-treatments

The creep-rupture behaviour of a Type DIN 1.4970 austenitic stainless steel has been investigated at 973 K (700°C) in a high vacuum for three conditions of thermomechanical treatment and a wide range of applied stresses using foil specimens of 105 μm thickness. After solution-annealing at 1373 K (1100°C) for all specimens, the three treatments were: — condition 1: 13% cold-worked — condition2: aged for 24 h at 1073 K (800°C) and 13% cold-worked — condition 3: (“Standard condition”): 13% cold-worked and aged for 24 h at 1073 K (800°C).The rupture lives and the minimum creep rates were found to be highly dependent on the applied stresses. The treatment of condition 1 material yielded a product as strong as the “standard” condition 3, while the condition 2 material was less creep resistant.Structural changes as well as fractography were followed using metallographic, transmission and scanning electron microscope techniques. Transgranular ductile fracture was clearly observed in all three conditions. TEM investigations showed that dispersive TiC precipitates were present in the matrix of condition 3 material before creep testing, contrary to condition 1 and 2 material. In condition 1, the TiC dispersion was already found after short creep times, while no dispersive TiC precipitates were found in condition 2 material in any test condition.     

Blood Clots versus PRF: Activating TGF-β Signaling and Inhibiting Inflammation In Vitro

The preparation of platelet-rich fibrin (PRF) requires blood centrifugation to separate the yellow plasma from the red erythrocyte fraction. PRF membranes prepared from coagulated yellow plasma are then transferred to the defect sites to support tissue regeneration. During natural wound healing, however, it is the unfractionated blood clot (UBC) that fills the defect site. It is unclear whether centrifugation is necessary to prepare a blood-derived matrix that supports tissue regeneration. The aim of the present study was to compare lysates prepared from PRF and UBC based on bioassays and degradation of the respective membranes. We report here that lysates prepared from PRF and UBC membranes similarly activate TGF-β signaling, as indicated by the expression of interleukin 11 (IL-11), NADPH oxidase 4 (NOX-4) and proteoglycan 4 (PRG4) in gingival fibroblasts. Consistently, PRF and UBC lysates stimulated the phosphorylation and nuclear translocation of Smad3 in gingival fibroblasts. We further observed that PRF and UBC lysates have comparable anti-inflammatory activity, as shown by the reduction in lipopolysaccharide (LPS)-induced IL-6, inducible nitric oxidase synthase (iNOS) and cyclooxygenase 2 (COX-2) expression in RAW264.7 cells. Moreover, inflammation induced by Poly (1:C) HMW and FSL-1, which are agonists of Toll-like receptor (TLR) 3 and 2/6, respectively, was reduced by both PRF and UBC. PRF and UBC lysates reduced the nuclear translocation of p65 in LPS-induced RAW264.7 cells. In contrast to the similar activity observed in the bioassays, UBC membranes lack the structural integrity of PRF membranes, as indicated by the rapid and spontaneous disintegration of UBC membranes. We show here that the lysates prepared from PRF and UBC possess robust TGF-β and anti-inflammatory activity. However, visual inspection of the PRF and UBC membranes confirmed the negative impact of erythrocytes on the structural integrity of membranes prepared from whole blood. The data from the present study suggest that although both UBC and PRF have potent TGF-β and anti-inflammatory activity, UBC does not have the strength properties required to be used clinically to prepare applicable membranes. Thus, centrifugation is necessary to generate durable and clinically applicable blood-derived membranes.     

The increasing dominance of science in the economy: Which nations are successful?

Scientometrics - We analyzed breakthrough patents that serve as the basis of emerging technological trajectories and paradigm over 25-years. The results showed that although technological fields...     

Synthesis of versatile TIPNO-based alkoxyamines

The versatile chloromethyl TIPNO-based alkoxyamine was efficiently transformed into other valuable functionalised TIPNO-based alkoxyamines such as amino alkoxyamines which are interesting initiators for block copolymers and bisalkoxyamines in good yield and in two steps at the most. One bisalkoxyamine has allowed to prepare well-defined polystyrene-b-poly(n-butyl acrylate)-b-polystyrene symmetrical triblock copolymer. The last representative example of such alkoxyamines is a styrenic alkoxyamine which was copolymerized with styrene to afford branched polystyrene. Finally, for the first time branched poly(n-butyl acrylate) by nitroxide mediated radical polymerization was obtained and was a efficient macroinitiator of styrene, which indicates that the radical polymerization mediated by this styrenic alkoxyamine is living.     

Heat capacities of aluminium alloys

In the framework of the European COST 507 project the specific heat capacities of aluminium alloys and metal matrix composites based thereon have been measured between 20 and 520 °C by differential scanning calorimetry and stored in the databank THERSYST along with other thermophysical properties mainly drawn from literature. The curves show the influence of additional elements and reinforcements, of the fabrication process, thermomechanical treatment and scanning rate on the precipitation and dissolution kinetics of the various metastable phases and their relative amounts. The database may be used to select existing light alloys or elaborate new ones in view of specific technical applications.Dedicated to Professor Dr. Hans Löffler on the occasion of his 72nd birthday.     

The Effect of Intensity-Modulated Radiotherapy to the Head and Neck Region on the Oral Innate Immune Response and Oral Microbiome: A Prospective Cohort Study of Head and Neck Tumour Patients

Neutrophils, also known as polymorphonuclear leukocytes (PMNs), form a significant component of the innate host response, and the consequence of the interaction between the oral microbiota and PMNs is a crucial determinant of oral health status. The impact of radiation therapy (RT) for head and neck tumour (HNT) treatment on the oral innate immune system, neutrophils in particular, and the oral microbiome has not been thoroughly investigated. Therefore, the objective of this study was to characterize RT-mediated changes in oral neutrophils (oPMNs) and the oral microbiome in patients undergoing RT to treat HNTs. Oral rinse samples were collected prior to, during and post-RT from HNT patients receiving RT at Dental Oncology at Princess Margaret Cancer Centre. The oPMNs counts and activation states were analysed using flow cytometry, and the oral microbiome was analysed using 16S rRNA gene sequencing. Statistically significant (p < 0.05) drops in oPMN counts and the activation states of the CD11b, CD16, CD18, CD64 and H3Cit markers from pre-RT to post-RT were observed. Moreover, exposure to RT caused a significant reduction in the relative abundance of commensal Gram-negative bacteria and increased the commensal Gram-positive microbes. Ionizing radiation for the treatment of HNTs simultaneously decreased the recruitment of oPMNs into the oral cavity and suppressed their activation state. The oral microbiome composition post-RT was altered significantly due to RT which may favour the colonization of specific microbial communities unfavourable for the long-term development of a balanced oral microbiome.     

Changes in blocking mechanisms during membrane processing of pomegranate juice

The effect of pressure, velocity, pretreatment, membrane type and pore size on fouling mechanisms were evaluated. Pomegranate juice was treated with polyvinylidene fluoride (PVDF) 0.22 μm and mixed cellulose ester (MCE) 0.1 μm at different pressures. Cake formation which was the dominant mechanism was formed in the first stages of process and, as the filtration proceeded, intermediate, standard, and complete blocking, respectively occurred at higher pressure (5 kPa). At lower pressure (0.5 kPa) the last mechanism did not occur. Results showed that cake formation was the only mechanism in MCE 0.22 μm, however, others occurred with MCE 0.1 μm and PVDF 0.22 μm. Using MCE 0.22 μm prior to MCE 0.025 μm can reduce the role of cake formation in pore blocking. Evaluation of the impact of velocity showed that at the higher velocity (0.53 m s⁻¹) the complete blocking occurred faster than at the lower velocity (0.09 m s⁻¹).     

DC and AC electrical conductivity of electro-deposited carbon-black–epoxy composite films

Carbon-black–epoxy composite films were prepared by cathodic electro-deposition of a dispersion containing carbon black and epoxy resins. The films, after baking at elevated temperature, show a semi-conducting behavior. Using DC conductivity measurements it was possible to determine the glass transition temperature of the samples, the conductivities of which lie in the sensitivity range of the instrument. Conductive samples show a positive temperature coefficient both below and above T_g. Based on the electrical impedance data extracted from the electrochemical impedance spectra, the exponents x and y were determined for the frequency dependence of the complex conductivity and complex dielectric constant as 0.8 and 0.2, respectively. These values are in good agreement with the classical values of x = 0.72 and y = 0.28. It was also found that these exponents are the same for all the CCB contents studied.     

Determination of Polycyclic Aromatic Hydrocarbons (PAHs) in Olive and Refined Pomace Olive Oils with Modified Low Temperature and Ultrasound-Assisted Liquid–Liquid Extraction Method Followed by the HPLC/FLD

The cleanup method of modified low temperature was compared with the standardized method of modified ultrasound-assisted liquid–liquid (UALL) extraction for the analysis of 15 polycyclic aromatic hydrocarbons (PAHs) in olive oil and refined pomace olive oil. The modified UALL extraction consisted in purification on C₁₈ reversed-phase, Florisil-bonded-phase and NH₂ cartridges, and modified low-temperature extraction was followed by alumina-N and NH₂ solid-phase extraction (SPE) cartridges. Both methods are followed by reversed-phase high-performance liquid chromatography with fluorescence detection. The chromatograms of the final extracts showed lower interferences in both of the methods. The solvent consumption and cost for the modified UALL method were higher than those of the modified low temperature, and also, it needed more equipment, but its analysis time was less. The limit of detection and limit of quantitation of the modified UALL method were 0.16–0.97 and 0.57–2.93 μg kg^?1, respectively, and for the modified low temperature, they were 0.09–1.97 and 0.29–5.99 μg kg^?1, respectively. The PAH recoveries for the modified UALL extraction method ranged from 75.0 to 111.0 % (RSD?=?3–8 %), and for the modified low temperature, they ranged from 81.5 to 113.8 % (RSD?=?3–10 %).