Comparison of demineralized allogeneic bone matrix grafting (the Urist procedure) and the Ilizarov procedure in large diaphyseal defects in sheep

The bone inductive capability of the Urist and Ilizarov procedures was compared in the repair of large diaphyseal defects in sheep. In 30 animals, a 4 cm segmental defect was created in the middle portion of the right femur and was stabilized with an external fixator. The sheep were divided into four groups according to the type of reconstruction of the defect. In group 1, a demineralized allogeneic bone matrix (DABM) cylinder was used; in group 2, DABM chips; and in group 3, gradual transport of a piece of bone detached from the proximal femoral fragment was used to fill the defect. Group 4 served as a control (the defect was left empty). New bone formation was assessed by serial radiographs until the time of death at 2 or 4 months. Postmortem specimens were analyzed with respect to bone mineral content, uptake of isotopes (45Ca and 3H-proline), and histology. The first signs of new bone formation were radiographically evident at 4 weeks. In the two groups in which reconstruction involved DABM (Urist procedures), new bone failed to form in eight of the 13 animals. Full bridging of the defect was observed at 8 weeks in one animal with a DABM cylinder and two with DABM chips. No decisive difference in bone yield could be demonstrated between the two Urist procedures. In the group treated with the Ilizarov procedure, new bone formation consistently occurred at a high rate; full bridging of the defect was observed in seven of the eight animals. Bone mineral scanning and histologic analysis essentially confirmed the radiographic results. Uptake of isotopes was selectively analyzed in two sheep from each experimental group in which new bone formation was exhibited in the defect; new bone formation was increased compared with that in the contralateral femur but was equal among the three experimental groups. Our study shows that gradual transport of a detached piece of autogeneic bone (Ilizarov procedure) is more effective than implantation of DABM (Urist procedure) in eliciting new bone formation in large diaphyseal defects in sheep. The variable bone induction by DABM may be explained by differences in host immune responses to the implants.     

STATISTICAL ASSOCIATION LEARNING OF THE MARKOV DECISION PROCESS

A neural computing approach to the Markov decision problem is presented. The method makes use of historical records of rewards as inputs and average long-run incomes per epoch as targets for training a backpropagation network to associate the two quantities, without a priori knowledge of the state transition probabilities. Estimation of the long-run income, given a new reward matrix as input, is interpreted as a statistical-association learning problem. Following the training, the relevant functional relationship between the income (output) and the reward (input), that has been learned by the network, can be used to compute an unknown expected income. The present study examines network generalization to new inputs, considering the effects of different topological designs and the characteristics of training samples on neural computing accuracy. Successful performance of the best design, which is determined directly from the underlying mathematical model of the Markov decision problem, is demonstrated by a computer simulation experiment.     

Preparation of fibrous ion-exchangers containing guanidine groups

Conclusions -- The reaction of guanidine with grafted polyglysodylmethacrylate has been investigated. Basic kinetic parameters of the process have been determined.-- Fibrous chemisorbents have been prepared based on graft PCA-PGMA or Cell-PGMA copolymers which have been aminated with guanidine; the content of amino nitrogen was up to 2% by wt.Translated from Khimicheskie Volokna, No. 1, pp. 29–31, January–February, 1991.     

Thermal layers near a friction surface of bodies in high-velocity slip

Thermal layers generated when one body slips over the surface of another are considered. Exactness of the solutions obtained by the methods of the boundary layer theory is analyzed.Institute of New Physical and Applied Problems of the Ukrainian Academy of Sciences, Kiev. Translated from Inzhenerno-fizicheskii Zhurnal, Vol. 63, No. 6, pp. 760–766, December, 1992.     

Self-aligning planarization and passivation for integration applications in III-V semiconductor devices

This work reports an easy planarization and passivation approach for the integration of III-V semiconductor devices. Vertically etched III-V semiconductor devices typically require sidewall passivation to suppress leakage currents and planarization of the passivation material for metal interconnection and device integration. It is, however, challenging to planarize all devices at once. This technique offers wafer-scale passivation and planarization that is automatically leveled to the device top in the 1-3-/spl mu/m vicinity surrounding each device. In this method, a dielectric hard mask is used to define the device area. An undercut structure is intentionally created below the hard mask, which is retained during the subsequent polymer spinning and anisotropic polymer etch back. The spin-on polymer that fills in the undercut seals the sidewalls for all the devices across the wafer. After the polymer etch back, the dielectric mask is removed leaving the polymer surrounding each device level with its device top to atomic scale flatness. This integration method is robust and is insensitive to spin-on polymer thickness, polymer etch nonuniformity, and device height difference. It prevents the polymer under the hard mask from etch-induced damage and creates a polymer-free device surface for metallization upon removal of the dielectric mask. We applied this integration technique in fabricating an InP-based photonic switch that consists of a mesa photodiode and a quantum-well waveguide modulator using benzocyclobutene (BCB) polymer. We demonstrated functional integrated photonic switches with high process yield of >90%, high breakdown voltage of >25 V, and low ohmic contact resistance of /spl sim/10 /spl Omega/. To the best of our knowledge, such an integration of a surface-normal photodiode and a lumped electroabsorption modulator with the use of BCB is the first to be implemented on a single substrate.     

New intramolecular effect observed for polyesters: An anomeric effect

A series of polyesters was prepared to evaluate hydrolytic stability as a function of cyclohexyl dibasic acid content. The three cyclohexyl dibasic acids: 1,2; 1,3; and 1,4 were formulated into polyesters with two glycols. The proportion of cis and trans isomers was evaluated via ¹H NMR. The hydrolytic stability of short chain polyesters was evaluated in an acetone/water mixture which solubilized the polyesters to mimic oligoester behavior within a thermosetting polyester coating environment. The rate of hydrolysis was monitored by acid titration and corroborated by GPC. Surprisingly, 1,2-cylohexyl diacid-based polyesters were robust, and 1,3-cyclohexyl diacid-based polyesters were the most susceptible to hydrolysis. Evidently, a 1,2-anchimeric effect for cyclohexyl dibasic acid polyesters was not an important consideration, while the 1,3-cyclohexyl ester interaction was. Consequently, an anomeric effect was proposed. Presented at the 81st Annual Meeting of the Federation of Societies for Coatings Technology, November 12–14, 2003, in Philadelphia, PA.     

Effect of temperature on the development of the yam moth, Dasyses rugosella Stainton (Lepidoptera: Tineidae)

Studies on the effect of temperature on the development of the yam moth, Dasyses rugosella Stainton were carried out in the laboratory at four different temperatures, 20°C, 24°C, 29°C and 33°C. The mean fecundity per female at 20°C, 24°C, 29°C and 33°C was 37.6±1.9, 84.2±2.7, 112.3±3.9 and 109.3±3.9 eggs, respectively. Oviposition period ranged from 4.7 days at 20°C to 2.9 days at 33°C. Hatchability of eggs was highest at 29°C with 70.0% and lowest at 20°C with 15.0%. The developmental time decreased with increase in temperature. The mean developmental time at 20°C, 24°C, 29°C and 33°C was 13.8±0.3, 7.8±0.2, 5.1±0.2 and 3.9±0.2 days for the egg, 90.0±0.7, 50.1±0.7, 36.1±0.8 and 23.6±0.8 days for the larval stages, 22.3±2.6, 12.2±0.2, 10.1±0.1, and 7.8±0.2 days for the pupa and 126.1±0.8, 70.1±0.8, 51.3±0.9, and 35.1±0.8 days for the period from egg hatching to adult emergence, respectively. Since fecundity, oviposition and development of the moth were impaired at 20°C, storage of yam tubers at low temperatures (well below 20°C but not lower than 12°C to avoid chilling injury) will significantly retard the development of D. rugosella and help in its control. Unmated individuals lived longer than their mated counterparts. Adult females were always larger than the males. The wing span of the female ranges from 16.9-18.5 and in males from 13.0-15.0 mm. The body length for males ranged from 5.0-6.5 and was 6.5-9.0 mm for females.