贝氏体钢内水冷穿孔顶头的粘钢及防止措施

从顶头生产工艺控制的角度,分析了贝氏体钢内水冷穿孔顶头产生粘钢的原因、特点和机制,指出掉鼻、缺肉是顶头粘钢的另一种更为严重的失效形式,强化熔炼工艺控制和保证夹杂物总量在A0.5B1C0.5D1级水平,粘钢问题可以得到有效控制。     

饭店的绿色建筑设计初探

事实上，许多饭店存在的许多环境问题都是由于饭店的“先天不足”造成的。因此，饭店绿色建筑设计是创建绿色饭店的根本环节。文章对绿色建筑设计的基本原则和内容作了初步的探讨。     

应用ATV71变频器有效解决给粉机变频器低电压跳闸问题

本文分析了给粉机变频器低电压跳闸的原因和解决办法，为解决给粉机变频器低电压跳闸，消除设备隐患提供了经验。     

高能超声处理Al-1Si合金凝固组织分析

采用高能超声处理Al-1Si合金熔体,借助金相显微镜和电子探针进行组织分析,并测定合金的熔化潜热,分析了熔体中超声空化效应和声流效应影响凝固过程的机理。结果表明,试样晶粒平均尺寸由超声处理前的94μm减小到超声处理后的34μm;合金试样的熔化吸热量由263.90J/g降低为159.81J/g,在熔体中施加高能超声显著改善了合金成分的均匀性并细化了晶粒。     

菱镁制品低温早强促凝剂作用机理分析

菱镁胶凝材料在20℃以上的生产环境具有快硬的特点,但在环境温度低于15℃时,1d的硬化强度只有28d的10%,低于5℃时存在无法脱模的问题。为使菱镁制品能在较低温度下正常生产,试验研制出一种菱镁制品低温早强促凝剂。介绍该早强促凝剂的作用机理、技术性能、掺量特点及在低温生产环境下促进菱镁制品强度发展的作用。     

The transformation of aluminium species in the processes of coagulation, sedimentation and filtration.

The aluminium toxicity is closely related to aluminium species. In this work aluminium was fractionated into seven forms: Al(T), Al(Sus), Al(C + S), Al(S), Al(C), Al(O) and Al(I). Four Al-based coagulants and simulated raw water were used in the laboratory to investigate the aluminium transformation in coagulation, sedimentation and filtration processes. It is the use of Al-based coagulants that contributes more to the increase of the residual aluminium for the low-turbidity raw water, while the Al-based coagulants, especially the polymeric aluminium coagulants, work to remove the aluminium from the high-turbidity raw water. In the case of traditional coagulants, the increase of the turbidity or the dissolved organic carbon (DOC) concentration in the raw water results in a high concentration of Al(C + S). The removal rate of aluminium species in the filtration process is not only related to its size: RAl(Sus) > RAl(C+S), RAl(C) > RAl(S), but also to the physicochemical properties of aluminium species and filter. For the kaolin-polyaluminium chloride system, a lower removal rate of aluminium species results is due to the complexation of humic acid and aluminium species.     

从“教教材”到“用教材教”——对“铝和铝合金的崛起”一课的教学改进

认真钻研教材，科学地运用教材，是进行教学改革的前提，是提高课堂教学质量的关键。叶圣陶曾经说过：“教材只能作为授课的依据，要教得好，使学生受到实益，还得靠教师的善于应用。”根据对高二年级所任教的具体化学课实践，结合备课中经常遇到的4个问题，谈谈对“铝和铝舍金的崛起”一课的教学改进。     

On the Hertzian fatigue cone crack propagation in ceramics

The Hertzian cone crack initiation and propagation in ceramics under cyclic fatigue loading with a spherical indenter is studied. Unlike the so-called quasi-static Hertzian cone crack, the fatigue Hertzian cone crack propagation eliminates the dynamic effect on unstable crack propagation. As such, the crack is found to propagate following the path of pure mode I type. We use an elasticity approach, a finite element analysis, and an empirical analysis to investigate the Hertzian cone crack in three stages: crack initiation, crack propagation, and crack kinking. The mechanism of the multiple concentric cone cracks is also explained. The purpose is to understand and predict the behavior of the formation of the Hertzian fatigue cone crack using available modeling tools.Zheng Chen is currently with Space Power Institute, Auburn University.     

基于语法的元程序设计系统的自动生成技术

本文提出一种基于语法的元程序设计系统的自动生成技术，并开发了一个元程序设计系统的自动生成系统Ａ－ＭＰＳ。元程序设计系统是一种以程序作为操作对象的有效的程序设计工具，并具有广泛的应用。