Dielectric relaxation and electrical conduction at low field of mineral-filled epoxy

Dielectric properties and conduction of the epoxy and its composites were measured over the temperature range — 20 to 70°C and the frequency range 10^–4-10^–1 Hz. Dielectric properties were obtained by performing Fouriertransforms on the charging and discharging curves. The resulting isothermal frequency spectra of dielectric constants and dielectric loss factors were analysed using the Cole-Cole law to obtain the activation energy for each material. The activation energies were also obtained for isothermal d.c. current. Current density-electric field-temperature characteristics are obtained for field levels up to 60 kV cm^–1, with step excitation of the applied field and currents recorded after a delay time of 10 min. Current density and electric field were computed and plotted for constant temperature. The linear (ohmic) curves were obtained for fields up to about 60 kV cm^–1 for temperatures up to about 20 °C. The non-linearity at the higher fields and temperatures did not imply the occurrence of non-ionic conduction. It has been demonstrated that both electric conduction and relaxation behaviour were ionic and could be fit by the Nakajima model for the unfilled epoxy and the Taylor model for the composites.     

Synthesis, characteristics and oxygen-sensitive properties of SrMgxTi 1 − xO3 nanocrystals

SrMg_xTi_{1 - x}O₃ nanocrystals (x = 0.1–0.6) were synthesized by the stearic acid gel method. Powder samples were characterized by X-ray diffraction and X-ray photoelectron (XP) spectroscopy. The results showed that the lattice parameter a and the O 1s XP spectrum changed not only with the Mg content x but also with the grain size d of the samples. The conductivity of a thick film specimen fabricated on an aluminium oxide wafer was investigated in a nitrogen—oxygen atmosphere.     

Tri-band frequency selective surface with circular ring elements

Theoretical analysis, physical reasonings, and experimental verifications are presented for a frequency selective surface with circular ring elements. Both double-screen and single-screen designs are generated for a tri-band system that reflects the X-band signal while transmitting through the S- and Ku-band signals. In these designs, the dielectric loading effect is used to reduce ring size and element spacing and thus avoid the grating lobe problem. The circular ring element is very insensitive to a large variation of the RF incident angle     

含氨烷基聚硅氧烷的研究进展

对含氨烷基聚硅氧烷的研究进行综述，着重介绍含氨烷基聚硅氧烷的种类，性能特点，制备方法及应用等。     

MEASUREMENT OF THE SPECIFIC SURFACE AREA OF POWDERS BY THIN LAYER WICKING

The specific surface areas (A) of different clay mineral powders were measured by both the BET method and by thin layer wicking. The values of A for the BET and the wicking experiments coincided within a few percent. Thus, the simple and inexpensive thin layer wicking approach may well suffice to obtain reliable specific surface area values for most powders. From the wicking data it is also possible to obtain a rough estimate of the average particle size.     

Delayed delivery of surviving triplet after fetal reduction and spontaneous abortion

In multiple pregnancies, survival of remaining fetuses after premature death and delivery of one fetus is uncommon. We report a case of a triplet pregnancy that was reduced to twins at the 14th gestational week and then had preterm premature rupture of membranes and intrauterine fetal death of one twin at the 17th gestational week. To save the surviving fetus, delivery of the dead fetus and ligation of the umbilical cord at the cervical level were performed. We also performed McDonald cervical cerclage to keep the placenta of the dead fetus as well as that of the surviving one in the uterine cavity. After a series of aggressive procedures, including immediate administration of tocolytic agents, and antibiotic prophylaxis to prevent infection and preterm labor, the surviving fetus was delivered vaginally 73 days later due to intractable uterine contractions. After a 10-week hospital stay, the infant boy, weighing 2,500 g, was discharged without any sequelae. To our knowledge, this was the longest interval between deliveries in a triplet pregnancy reported in Taiwan. With adequate intensive management, a satisfactory outcome of the fetus and mother in such cases is possible.     

扩展有限递归进程模型

主要讨论离散事件动态系统的建模问题。由ＫＩｎａｎ和ＰＶａｒａｉｙａ提出的有限递归进程（ＦＲＰ）是描述并发离散事件动态系统的有力工具，但在其ＦＲＰ中，没有定义对数据变量的操作和条件转移算子。本文扩展ＦＲＰ包括这两方面内容。最后举例说明扩展ＦＲＰ的描述能力。