含淀粉聚乙烯膜的时控光降解研究

使用复合光降解剂，得到了可光降解的生物降解膜。对膜的光降解进行了考察，并对影响光降解的因素进行了讨论，结果表明，我们所制得的膜是一种较好的时控光降解膜。     

膨润土凝胶调剖剂XJF的研制及应用

介绍了调剖剂XJF的配方,讨论了影响调剖剂性能的配方因素(膨润土含量、HPAM溶液浓度、XJ用量及添加剂Fc的浓度),考察了封堵能力和应用范围,简介了在火烧山油田现场试验的结果。     

Real time frequency domain fiberoptic temperature sensor

The excited state phosphorescence lifetime of alexandrite crystals is used to monitor temperature in the physiological range from 15-45°C with precision and accuracy of 0.2°C. A 500-μm cubic alexandrite crystal bounded to the distal end of an optical fiber of similar core dimensions is excited with pulsed Ne-He laser light. This apparatus uses a sampler for data acquisition and frequency domain methods for data fitting. The instrument amplifies the AC components of the detector output and band limits the signal to 12.5 kHz. The fundamental frequency of the excitation is set to 195.13 Hz to obtain 64 harmonics. This band limited signal is sampled and averaged over few hundred cycles in the time domain. The frequency domain representation of the data is obtained by employing fast Fourier transform algorithms. The phase delay and the modulation ratio of each sampled harmonic are then computed. Five to 50 values of the phase and modulations are averaged before computing the sensor lifetime. The instrument is capable of measuring precise and accurate excited state lifetimes from subpicowatt luminescent signals in plastic optical fibers. A least squares fit yields the lifetimes of single exponentials. A component of zero lifetime is introduced to account for the backscatter excitation seen by the photodetector leaking through optical interference filters. The phosphorescence lifetimes measured reproducibly to about three parts in a thousand are used to monitor physiological temperature. Temperatures are computed employing empirical polynomials. The system drift is negligible over 15 h of continuous operation. The instrumentation and methods allow 1.3-s update times and 30-s full response times     

Protein C Osaka 10 with aberrant propeptide processing: loss of anticoagulant activity due to an amino acid substitution in the protein C precursor

We studied the molecular basis of protein C deficiency in a family with a history of thromboembolic disease. An approximately 50% reduction in anticoagulant activity despite normal levels of protein C amidolytic activity and antigen was detected in plasma from the proband. All the exons and intron/exon junctions of the protein C gene were studied using a strategy that combined polymerase chain reaction amplification with DNA sequencing of the amplified fragments. We identified a C-to-A change at nucleotide number 1387 of the protein C gene in the proband and his mother, and this mutant was designated protein C Osaka 10. The C-to-A change resulted in the substitution of Ser for Arg at position -1, which is the processing protease cleavage site. The mutant protein C was partially purified from plasma of the patient's mother using barium adsorption followed by ion-exchange column chromatography. It eluted at the same sodium chloride concentration as normal protein C, and thus gamma-carboxylation of the mutant protein appeared to be normal. The apparent molecular weight of this mutant protein C was the same as that of the normal protein on immunoblotting. Amino-terminal sequence analysis showed that the light chain of the mutant protein C had an additional Ser at position-1. Thus, the loss of anticoagulant activity of protein C Osaka 10 can be explained by alteration of the conformation of the Gla domain by the additional Ser in the mutant molecule.     

铝锂合金力学性能的各向异性

针对当前困扰铝锂合金实际应用的各向异性问题，概述关于铝锂合金中各向异性的表现规律，产生机理及对于降低各向异性所采用的方法等方面的研究现状和进展，对铝锂合金各向异性表现与微观组织结构的关系以及目前克服各向异性所采用方法的局限性进行分析。就此提出，若彻底解决这一问题则必须采用更先进的合金化方法及热加工工艺，研制新一代铝锂合金的观点和研究方向。     

Inter- and intra-molecular ionic interactions of polyampholyte: Carboxymethyl-2-diethylaminoethylcellulose

Carboxymethyl-2-diethylaminoethylcellulose (CM-DEAE cellulose) was prepared by etherification of carboxymethylcellulose with diethylaminoethyl chloride in a NaOH solution. The behaviour of CM-DEAE cellulose in aqueous solution was studied by viscosity and GPC measurements. The degree of substitution (DS) and existing states of DEAE substituents were examined by the use of proton NMR, and those of the CM substituents were observed with FT-IR. The results reveal that the reduced viscosity and apparent molecular size of CM-DEAE cellulose vary with the concentration of sodium chloride and changes in pH and DS. These phenomena can be explained in terms of inter- and intra-molecular ionic interactions.     

Crystallization behaviour of Ni-Co-base metallic glasses by isochronal and isothermal annealing

The crystallization behaviour of three amorphous alloys, Co₅₀Ni₂₅Si₁₅B₁₀, Ni₅₀Co₂₅Si₁₅B₁₀ and Ni₅₀Co₂₅P₁₅B₁₀, was studied by means of differential thermal analysis in conjunction with scanning transmission electron microscopy. Isochronal annealing showed a strong dependence of crystallization on scan rate over the range of 1.99 to 20.70 K min^–1. At high Co/Ni ratios, a sequential two-stage crystallization process involving primary MS-I phase followed by MS-II phase precipitation was observed. At low Co/Ni ratios MS-I and MS-II crystallization were concurrent and inseparable. Replacement of the metalloid Si with P as the glass-former dramatically reduced the activation energy for crystallization as well as the crystallization temperature. A mechanistic understanding of these findings was pursued in light of TEM/STEM microanalysis     

窄带中频数字接收机高速信号处理技术

窄带中频数字接收机在雷达对抗侦察中得到了广泛应用，其高速信号处理技术是目前研究的重点。本文详细介绍了数字雷达告警接收机高速信号处理技术的发展现状和关键技术，最后通过对该技术的全面分析指出了值得深入研究的领域。     

n-Al2O3/Ni复合镀层的组织与滑动磨损性能研究

用电刷镀技术制得了镍基n-Al2O3复合镀层，并对镀层的滑动磨损性能进行了试验研究。纳米复合镀层的表面形貌比较细腻，镀层中纳米粒子分布均匀，与基质金属结合紧密。镀层显微硬度达到HV700，比快速镍镀层提高约40％。滑动磨损试验结果表明，随着纳米粒子含量的增大，镀层的耐磨性提高，摩擦系数也呈增大趋势；但当镀层中n-Al2O3粒子的超过2.56%(质量分数）时，镀层的耐磨性显著下降。纳米复合镀层的磨损机制以疲劳磨损为主，而快速镍底层以粘着磨损为主。     

AVO 异常检测技术及其应用

本文介绍了一系列简单而实用的 AVO 异常显示、检测和增强的新技术。包括:共炮检距(或相近)显示技术、振幅比值显示技术、滚动显示技术、线性转换显示技术、抛物线转换显示技术和 AVO 增强技术。文中以实例说明了上述各种方法的应用情况。