Repair approach for DMC images based on hierarchical location using edge curve

The color composite digital mapping camera (DMC) images are produced by the post-processing software of Z/I imaging. But the failure of radiometric correction in post-processing leads to residual radiometric differences between CCD images, which then affect the quality of the images in further applications. This paper, via analyzing the characters and causes of such a phenomenon, proposes a repair approach based on hierarchical location using edge curve. The approach employs a hierarchical strategy to locate the transition area and seam-line automatically and then repair the image through the global reconstruction between CCD images and the local reconstruction in the transition area. Experiments indicate that the approach proposed by this paper is feasible and can improve the quality of images effectively. Supported by the National Basic Research Program of China (Grant No. 2006CB701302) and the Youth Fundation Plan of Wuhan (Grant No. 200750731253)     

A hybrid rendering algorithm for textile objects

Although realistic textile rendering has been widely used in virtual garment and try-on systems, a robust method to simulate textile with a realistic appearance and high fidelity is yet to be established. We propose to use a novel hybrid geometric- and image-based rendering (GIBR) method to achieve photo realistic representation of textile products. The image-based technique, with its radiance synthesis algorithm, enables us to recover the reflectance properties of textile in an environment photo, and thus can render the appearance of textile material. The geometry-based technique, with its traditional illumination model of assigning illumination parameters extracted from the original scene (such as radiance and chroma dispatch), makes it possible to interactively manipulate 3D virtual objects in the “real” environment. Our realistic textile rendering method has advantages over the traditional ones in its easiness to implement and its wide range of applications.     

一种基于SoC平台设计的AVS解码器软硬件分区结构

视频解码芯片的结构因硬件强大的处理能力和软件灵活的可编程功能从硬件转向软硬件分区结构。该文针对AVS标准的算法和解码实现复杂程度,根据软硬件协同设计思想提出了一种结构划分合理的AVS高清视频解码器软硬件分区结构。根据AVS算法的特点该结构将宏块层以上部分的元素解析划归到软件解码中,将宏块层解码划为硬件处理。经验证,该结构设计可实现AVS高清码流解码,并在C语言编写的硬件平台仿真程序中得以实现。     

柔性制造系统非阻塞监督控制器优化设计

针对一类含有并发执行装配过程的柔性制造系统G-systems,提出一种新的死锁预防策略保证该系统的非阻塞性,即在控制下,受控系统从任意可达状态都可以到达理想状态.首先对Petri网模型中基本信标实施控制,保证了基本信标的最大可控,然后通过线性规划算法求取所有从属信标满足可控性的条件,即获得基本信标的控制深度变量.与现有方法相比,该策略优点在于只需加入少量的控制库所,就可避免不必要的迭代过程;其次是提出控制器输出弧位置优化策略,得到了结构更为简单、许可行为更多的非阻塞Petri网控制器.     

On Generalized Fuzzy Belief Functions in Infinite Spaces

Determined by a fuzzy implication operator, a general type of fuzzy belief structure and its induced dual pair of fuzzy belief and plausibility functions in infinite universes of discourse are first defined. Relationship between the belief-structure-based and the belief-space-based fuzzy Dempster-Shafer models is then established. It is shown that the lower and upper fuzzy probabilities induced by the fuzzy belief space yield a dual pair of fuzzy belief and plausibility functions. For any fuzzy belief structure, there must exist a fuzzy belief space such that the fuzzy belief and plausibility functions defined by the given fuzzy belief structure are just the lower and upper fuzzy probabilities induced by the fuzzy belief space, respectively. Essential properties of the fuzzy belief and plausibility functions are also examined. The fuzzy belief and plausibility functions are, respectively, a fuzzy monotone Choquet capacity and a fuzzy alternating Choquet capacity of infinite order.     

地磁场在缺陷微磁检测中的作用分析

地磁场在缺陷微磁检测中的作用是实现微磁检测定量化的理论基础;通过微磁学理论分析地磁场反复磁化铁磁性物质的物理过程,由于磁畴壁的移动,在缺陷区产生固定磁畴结点,固定磁畴结点内的磁场在缺陷处发生泄漏,形成可识别的缺陷信号,固定磁畴结点一旦产生其磁场强度远大于地磁场,地磁场对缺陷微磁检测的影响只会改变检测信号的幅值,不会改变缺陷信号的特征,揭示了缺陷磁场失而复得的原因,同时实验验证了地磁场在应力致磁效应中起到偏置磁场的作用,为在役设备微磁检测奠定了理论基础。     

Dual-reflector configuration in varied line-space grating displacement sensor

A method to improve the accuracy of the wavelength encoding varied line-space grating displacement sensor is presented. Based on the detailed analysis of the measured displacement errors from the single-mirror configuration sensor, a dual-reflector configuration is used to replace the previous configuration, and greatly decreases its errors. Experiments are conducted in order to make comparison of the two configurations. The results show that the measured displacement error of the sensor with dual-reflector configuration is lower than 0.03 mm in full scale (0 to 50 mm), only about 10% of the sensor with single-mirror configuration.     

基于偏振不敏感超材料的全光可调谐太赫兹慢光效应研究

太赫兹(terahertz,THz) 慢光效应可以有效地提升THz脉冲数据传输的安全性和存储性,而一般THz慢光器件对入射THz波偏振态变化敏感。本文设计了一种超材料结构,其微结构单元由一个十字型谐振器和4个U型谐振器构成。研究表明:基于超材料的THz慢光效应对线偏振光和圆偏振光均不敏感。通过对超材料结构的参数优化,获得到了最大群折射率为1 618的慢光效应。另外,本文在超材料微结构层和SiO₂衬底之间嵌入了一层二硫化钼(MoS₂)薄膜,当MoS₂的载流子浓度从1.7×10¹⁷ cm-3增大到5.1×10¹⁹ cm-3时,群折射率从1 566减小到26。实现了偏振不敏感全光可调谐的THz慢光效应。该研究有望为偏振不敏感和全光可调谐的THz慢光器件设计提供崭新的研究思路。     

Photomultiplication-Type Organic Photodetectors with High EQE-Bandwidth Product by Introducing a Perovskite Quantum Dot Interlayer

A photomultiplication (PM)-type organic photodetector (OPD) that exploits the ionic motion in CsPbI₃ perovskite quantum dots (QDs) is demonstrated. The device uses a QD monolayer as a PM-inducing interlayer and a donor–acceptor bulk heterojunction (BHJ) layer as a photoactive layer. When the device is illuminated, negative ions in the CsPbI₃ QD migrate and accumulate near the interface between the QDs and the electrode; these processes induce hole injection from the electrode and yield the PM phenomenon with an external quantum efficiency (EQE) >2000% at a 3 V applied bias. It is confirmed that the ionic motion of the CsPbI₃ QDs can induce a shift in the work function of the QD/electrode interface and that the dynamics of ionic motion determines the response speed of the device. The PM OPD showed a large EQE-bandwidth product >10⁶ Hz with a −3 dB frequency of 125 kHz at 3 V, which is one of the highest response speeds reported for a PM OPD. The PM-inducing strategy that exploits ionic motion of the interlayer is a potential approach to achieving high-efficiency PM OPDs.     

Plasmon-Assisted Self-Encrypted All-Optical Memory

All-optical responsive nanomaterials, which can rapidly switch between two stable states, have been regarded as the next-generation memories due to their potential to realize binary information storage and implement on-chip, integrated photonic neuromorphic systems. Rare earth oxides are preeminent candidates owing to their extraordinary luminescent stability and narrow optical transitions. However, due to the lack of simple and effective optical switches, it is difficult to realize all-optical data storage, encoding, and retrieval by pure rare earth-doped luminescent nanoparticles. Here, a rapid and high-contrast of 10⁴ luminescent switching of Y₂O₃:Eu³⁺ nanoparticle between the enhancement and quenching states is achieved by employing the strong light confinement and ultrafast thermal response of localized surface plasmon resonance. A self-encrypted all-optical memory is presented with optical information writing, encryption, reading, and re-writing, and a high-sensitivity synaptic response of emitters to frequency and light intensity flux, which can be harnessed to encrypt information flows and promote convenient and high-security information encryption. Such a convenient and secure plasmonic thermally assisted self-encrypting luminescent switch paves the way for constructing high-performance stimuli-responsive rare earth oxide crystals on demand and expanding their applications in various data encryption, anti-counterfeiting, and rewritable colouration devices.