分子振动态及其跃迁的激光相干控制

讨论了激光合成相干叠加态的原理及其性质 ,针对 XY2 型分子 ,证明了合成局域模振动的可行性 ,然后给出相干叠加态的跃迁几率特征 ,发现它仍表现出相干的特性 ,对之进行分析研究表明 ,分子的振动态具有可控性 ,态跃迁几率具有可控性。     

复杂目标近场电磁散射的可视化计算方法

首次介绍了复杂目标近场散射计算的可视化方法。采用非均匀有理Ｂ样条曲面（ＮＵＲＢＳ）精确构造任意形状散射体，结合几何体近场透视变换和Ｚ－Ｂｕｆｆｅｒ技术实现了基于Ｗｉｎｄｏｗｓ平台的近场散射计算。提出广义雷达散射截面的概念并给出的若干算例。该方法充分利用了计算机３Ｄ图形设备的几何运算能力，运算速度快，严谨高，可扩展性好。     

重Fermi子体系反常比热的理论研究

利用文献中Ｋｏｎｄｏ格子理论模型，研究了重Ｆｅｒｍｉ子体系比热与温度的反常关系。     

Permeation of Zidovudine and Probenecid from Oily Bases Containing Alcohols Through Rat Skin

Permeation of zidovudine (3'-azido-3'-deoxythymidine, AZT) and probenecid from oily bases containing an alcohol through rat skin was examined. Isopropyl myristate (IPM), as an oily vehicle, showed a penetration enhancing effect for AZT and probenecid. Ethanol, n-propanol, and n-butanol were used as additives in IPM and were examined for their own permeation and the enhancing effect on the permeation of AZT and probenecid. The skin permeation of AZT and probenecid from IPM was enhanced by addition of the alcohol in IPM. The degree of the enhancement was decreased with increasing lipophilicity of the alcohol used. me permeation rate of the drug from those systems was shown to be governed by penetration-enhancing effects of the oily base and alcohol, and the penetration of the alcohol itself through the skin.     

结构陶瓷的高温疲劳强度衰减理论

提出了陶瓷材料疲劳强度衰减理论并由此导出了各种疲劳关系式。建立了疲劳基本方程ｄσ＿ｒ／ｄ＿ｉ＝一Ａσ（ｔ）￣ｎｔ￣（－ｍ），得出了疲劳寿命公式Ｔ＝Ｍ（σ＿０－σ）／Ａσ￣ｎ（静疲劳时Ｍ＝１，连续增载疲劳时Ｍ＝ｎ＋１，循环疲劳时Ｍ＝（ｎ＋１）／（１＋Ｒ＋Ｒ￣２＋……＋Ｒ￣ｎ），逐级加载时，并导出不同疲劳方式下疲劳寿命间的关系。同时，用多种Ｓｉ＿３Ｎ＿４材料在高温中作了论证试验，结果与理论一致。     

钢带捆扎对木箱强度的影响

从力学角度分析了钢带捆扎对木箱强度的影响，指出木箱经钢带捆扎后，可减小箱底的最大弯矩，提高木箱的承载能力和减少板厚。同时还在无支撑间隔的基础上，详细介绍了钢带捆扎的设计方法。     

Design of optimum signals for the simultaneous estimation of timedelay and Doppler shift

The problem of joint estimation of time delay and Doppler shift is considered from the point of view of the Wigner distribution of the signal. A very efficient method of obtaining the optimum signal with minimum estimation error based on the convexity of the design region is developed. Practical applications, however, require the signal to satisfy other constraints which present complications in acquiring the optimum signal. A design approach based on the method of simulated annealing is suggested to solve for the optimum signal under constraints. The performance of the signals so obtained is evaluated and compared with that of signals obtained by synthesis     

China＇s Electric Power Reform：Different Economics and Challenges

China＇s electric power reform has followed the western reform format, however, it doest not seem to have endorsed the liberalization ideology underlying the reform model. This raises the concern of whether and how a competitive power market may be established and reform objectives reached. The new market competition model is easy to build in theory. The experience of many countries suggests that the market reform is extremely difficult because of the interruptions by different interest groups. To transform a centrally planned power sector into a competitive power market is a daunting task. Policy makers need to take into consideration the transitional nature of the economy and power industry as they implement the competitive power market model.     

Pattern Effect Removal Technique for Semiconductor-Optical-Amplifier-Based Wavelength Conversion

A technique to overcome pattern dependence in semiconductor-optical-amplifier-based wavelength converters is presented. The technique is based on a careful selection of red- and blue-shifted spectral components having complementary pattern effects in the output spectrum of a wavelength-converted signal. Significant signal quality improvements are reported at a bit rate of 40 Gb/s.     

大花水水电站首部枢纽布置设计

大花水水电站首部枢纽由碾压混凝土拦河大坝、泄洪建筑物和电站进水口组成。大坝采用河床拱坝 左岸重力坝的组合坝型,拱坝最大坝高134.50 m,重力坝最大坝高73 m。泄洪建筑物布置在拱坝坝身,为3个表孔 2个中孔的布置型形式。电站进水口布置于左岸重力坝坝身。首部枢纽布置紧凑,而且充分考虑了坝址区河谷狭窄、地形地貌及、存在的地质缺陷,以及泄洪流量大等工程特点。本文重点介绍首部枢纽的布置设计比选过程。