南方丘陵山区湿地氮磷时空变化及影响因素分析

对陈墩库区湿地从2015年9月到2016年8月进行水质监测,通过方差分析和相关性分析归纳总结湿地氮磷浓度变化规律,探究不同植物与湿地氮磷的相互作用。结果表明:陈墩库区TN、TP浓度在不同湿地季节变化有所差异,各湿地TN浓度在春、夏、冬差异显著;TP在冬季有显著差异,其余季节均无明显差异,陈墩库区TN、TP浓度季节变化与进水氮磷浓度和湿地面积、植物类型及生长状况密切相关;不同植物与湿地TN、TP呈现不同的相关性,这与水生植物对氮磷的吸收能力不同有关;轮叶黑藻、再力花、芦苇对氮磷的去除效果较好。     

1，1＇－二（1，3－二氧代长链烷基）二茂铁的合成与表征

用１，１＇－二乙酰基二茂铁与酯的Ｃｌａｉｓｅｎ缩合反应合成了５个新的１，１＇－二（１，３－二氧代长链烷基）二茂铁，其通式为Ｃ５Ｈ４ＦｅＣ５Ｈ４（ＣＯＣＨ２ＣＯＣｎＨ２ｎ＋１）２，ｎ＝５～９。通过元素分析、紫外－可见光谱、红外光谱、核磁共振氢谱和质谱对这些化合物进行了表征。结果表明，这些β－二酮仅以烯醇式存在。     

从废旧聚苯乙烯泡沫塑料中回收苯乙烯

本文采用有机溶剂甲苯作为消泡剂，用热裂解法从废旧聚苯乙烯泡沫塑料中回收苯乙烯，苯乙烯收率可达８０％以上。     

基于CAD/CAE/CAM/RP的复杂陶瓷产品快速制造技术

针对目前手工方式的卫生洁具等复杂陶瓷产品的研发过程,借鉴CAD/CAE/CAM/RP技术在其它制造行业中应用的成功经验,将这些先进制造技术应用于卫生洁具等复杂陶瓷产品的研发中;CAD用于设计产品和模具的模型,CAE用于模拟洁具冲水过程和分析冲水性能,RP用于制作洁具产品的原型,CAM用于加工试用石膏工作模具。就这些技术的应用提出了两种主要方案,并分析了各自的特点。经过实际应用表明:先进制造技术的应用能大大缩短产品研发周期、提高产品质量、降低开发成本。     

Graft copolymerization of styrene and acrylonitrile onto EPDM

Acrylonitrile–EPDM–styrene (AES) graft copolymers were synthesized by solution graft polymerization of styrene (St) and acrylonitrile (AN) onto EPDM in an n‐hexane/benzene solvent with benzoyl peroxide (BPO) as an initiator. The structure changes were studied by an FTIR spectrophotometer. The grafting parameters were calculated gravimetrically. The influence of the polymerization conditions, such as the reaction time, concentration of the initiator, EPDM content, and weight ratio of St/AN, on the structure of the products was investigated. It was found that a proper initiator concentration and EPDM content will give a high grafting ratio of the AES resin. The thermal property of the copolymer was studied using programmed thermogravimetric analysis (TGA). The results showed that the copolymer has a better heat‐resistant property than that of ABS, especially for the initial decomposition temperature (T_in) and the maximum weight loss rate temperature (T_max). Also, the mechanism of the graft reaction was discussed. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 428–432, 2002     

Effects of the electrospray ionization parameters on the formation and morphology of colloidal microspheres of polyacrylonitrile

Polyacrylonitrile colloidal microspheres have been successfully prepared with different concentrations of electrospraying polyacrylonitrile solutions. The morphology of the colloidal spheres has two kinds of structures and is strongly affected by electrospray‐ionization parameters, such as the polymer concentration, applied voltage, and distance between the electrodes. The solvent can also affect the morphology of polyacrylonitrile. The optimum conditions for preparing colloidal spheres have been found, and differential scanning calorimetry results indicate that polyacrylonitrile colloid spheres are amorphous. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2889–2893, 2006     

Stabilization of positive switched systems with time-varying delays under asynchronous switching

This paper investigates the state feedback stabilization problem for a class of positive switched systems with time-varying delays under asynchronous switching in the frameworks of continuous-time and discrete-time dynamics. The so-called asynchronous switching means that the switches between the candidate controllers and system modes are asynchronous. By constructing an appropriate co-positive type Lyapunov-Krasovskii functional and further allowing the functional to increase during the running time of active subsystems, sufficient conditions are provided to guarantee the exponential stability of the resulting closed-loop systems, and the corresponding controller gain matrices and admissible switching signals are presented. Finally, two illustrative examples are given to show the effectiveness of the proposed methods.     

固相接枝共聚法制备PP—g—PS

用固相接枝共聚方法制备了聚丙烯接枝苯乙烯(PP-g-PS),详细地考察了聚丙烯与引发剂的品种、反应温度、苯乙烯及引发剂的浓度等因素对接枝率和接枝效率的影响。研究结果表明:PP-g-PS具有较高的接技率,应用于聚丙烯/聚苯乙烯(PP/PS)共混物中,能降低分散相PS的粒径,提高PP/PS的相容性。     

Studies on syntheses and properties of novel CeO2/polyimide nanocomposite films from Ce(Phen)3 complex

A series of cerium dioxide (CeO₂)/polyimide (PI) nanocomposites were successfully prepared from Ce(Phen)₃ and polyamic acid (PAA) via the solution direct-dispersing method, followed by a step thermal imidization process. TGA and XPS studies showed that the cerium complex decomposed to form CeO₂ during the thermal imidization process at 300 °C. SEM observation showed that the formed CeO₂ as nanoparticles was well dispersed in polyimide matrix with a size of about 50-100 nm for samples with different contents of CeO₂. Thermal analysis indicated that the introduction of CeO₂ decreased the thermal stability of nanocomposite films due to the decomposition of Ce(Phen)₃ in the imidization process, while the glass transition temperature (T_g) increased obviously, especially nanocomposite films with high loading of CeO₂ exhibited a trend of disappearance of T_g. DMTA and static tensile measurements showed that the storage modulus of nanocomposite films increased, while the elongation at break decreased with increasing CeO₂ content.