ISDN的现状和发展

９０年代将是ＩＳＤＮ和宽带ＩＳＤＮ迅速发展的年代，本文介绍了国外Ｎ－ＩＳＤＮ和Ｂ－ＩＳＤＮ的发展动向，并结合我国通信网的现状，对发展ＩＳＤＮ（Ｂ－ＩＳＤＮ）提出若干建议。     

Voigt线型的微分消卷积

通过频域内的近似处理得到了洛仑兹线型微分消卷积的实用算符。推广到高斯、洛仑兹线型的复合情形即Ｖｏｉｇｔ线型，亦可得到它的消卷积算符。把所得算符应用于单峰、多峰情形，对各种不同的组合形式，分别得到了消卷积谱，其分辨率提高因子Ｋ与复合线型中洛仑兹成分的多少有关。     

Machining with tool–chip contact on the tool secondary rake face—Part II: analysis and discussion

The forces, chip thickness, and natural tool–chip contact length in machining with a double-rake-angled tool are predicted in Part II of the present study. It is revealed that in comparison with a single-rake-angled tool, a double-rake-angled tool increases the forces, especially the thrust force. However, the increase in chip thickness and tool–chip contact length is not significant under the input conditions specified in the present study. The effect of seven input variables of the proposed model is quantitatively investigated. The predicted variations of forces, chip thickness, and natural tool–chip contact length are in good agreement with theoretical and experimental results obtained by other researchers. The interrelationships among the resultant force, the chip thickness, and the natural tool–chip contact length are established, which provides a new and promising method to estimate the tool–chip contact length by employing the resultant force. It is demonstrated that the model can also be extended to study the problem of machining with a groove-type chip breaker tool.     

多级泵站老化的模糊评价模式

多级泵站是一个包括各级泵站及泵站内各种设施的复杂系统，系统内各个泵站的老化直接影响整个泵站系统的正常运行，采用单元化方法将多级泵站系统单元伦，引和泵站老化评价指标，建立了多级泵站老化的模糊评价模式，并对甘肃省景泰高扬程提水灌区多级泵站系统进行分析，提出了评价多级泵站老化程度的排序方法。     

燃气空调的优势及对燃气和电力调峰的意义

分析了天然气季节性调峰的各种手段，指出燃气空调的技术经济优势，以及发展燃气空调对于电力和燃气系统季节性调峰的作用。     

低相噪,低杂波数字锁相环路滤波器的设计

较详细地分析数字锁相频率合成器的相位噪声，着重用控制论方法对低相噪、低杂波锁相环的环路滤波器进行设计，并用某Ｓ波段频率合成器的实验结果进行了验证。     

Formation mechanism of bainitic ferrite and carbide

Superledges on the broad faces of bainitic ferrite plates have been observed with transmission electron microscope (TEM). The observed superledges, ranging from less than 1 to 24 nm in height, are imaged in three dimension by way of tilt operation under TEM. Also, an array of smaller superledges are observed to pile up in front of a secondary phase. Pileup of superledges in front of a barrier is indicative of the mobility of an individual superledge. The precipitation of carbide associated with bainitic ferrite is also studied. It is observed that a carbide of a wedgelike shape may exist in front of a superledge with its tip(i.e., thinner end) penetrating the austenite and its root (the other end) originating at α:γ boundary. This condition indicates that the observed carbides may nucleate at the austenite side of α:γ phase boundary and grow toward austenite matrix. This article is based on a presentation made at the Pacific Rim Conference on the “Roles of Shear and Diffusion in the Formation of Plate-Shaped Transformation Products,” held December 18-22, 1992, in Kona, Hawaii, under the auspices of ASM INTERNATIONAL’S Phase Transformations Committee.     

New efficient designs for XOR and XNOR functions on the transistorlevel

Two new methods are proposed to implement the exclusive-OR and exclusive-NOR functions on the transistor level. The first method uses non-complementary signal inputs and the least number of transistors. The other one improves the performance of the prior method but two more transistors are utilized. Both of them have been fully simulated by HSPICE on a SUN SPARC 2 workstation     

相关噪声中随机信号的Robust检测

本文重点讨论了在平稳ｍ相依噪声中弱随机信号的最佳无记忆Ｒｏｂｕｓｔ检测问题；并且以渐近功效函数为测度准则得到了最大最小无记忆非线性Ｒｏｂｕｓｔ检测器。