A Web-based Kanban system for job dispatching, tracking, and performance monitoring

A Kanban system facilitates lean principles in a simple and effective way. While reportedly successful in many manufacturing firms, the conventional Kanban systems using physical cards suffer from human errors, limited tracking capability, and so on. To make the information flow leaner, software providers add new features to their existing programs for manufacturing systems to computerize Kanban activities. As Web-based technologies advance rapidly, developing an entirely Web-based Kanban system appears to be feasible and promising. This paper presents the advantages, limitations, and challenges of Web-based Kanban systems. An experimental program has been developed based on PHP+MySQL, a popular Web programming platform. The server-executed program features cross-platform compatibility, real-time tracking and performance monitoring, and greatly enhanced information contents compared to physical Kanbans. Human errors are minimized by the automated transactions; nevertheless, the interfacing and data maintenance require further research efforts.     

多测井曲线的综合处理合成

测井曲线是地质分层的基础，但在利用单一测井曲线解决复杂地质问题时也存在多解性和局限性。为克服多解性，人们采用多种测井曲线进行地质分层，提高了分层的精度。本文在此基础上提出把多条曲线分别赋予不同的加权因子，然后进行归一化处理，形成一条标准综合参数测井曲线。此综合参数曲线突出了所选的多条测井曲线的公共信息，减少或削弱了单一测井曲线中的偶然误差，提高了综合后测井资料的可信度。该方法可应用于地质分层、岩性分析、含油气预测等诸多领域。应用时要注意，并非所选择的测井曲线种类越多越好，而是要选择那些最能反映地层单元特征信息的测井曲线。     

聚苯醚磺酸锂／共聚醚复合物的离子导电性研究

合成了３种不同磺化度的聚苯醚磺酸锂（ＳＰＰＯＬｉ）与Ｐ（ＭＥＯ１６－ＡＭ）／ＳＰＰＯＬｉ复合物。研究了复合物的离子导电性与磺化度，组成比及增塑剂含量的关系。含４０％（ｍａｓｓ）增塑剂的复合物具有单离子导电特征，锂离子迁移数高达０．９７，室温电导率达２×１０－５Ｓ／ｃｍ。     

使用混合杆柱时抽油泵柱塞的超冲程

任何抽油杆柱在理论上都可能产生超冲程，只是大小不同而已。超冲程的存在，使泵柱塞的有效冲程增大，甚至会大于光杆冲程。首次提出了抽油泵柱塞相对超冲程和绝对超冲程的概念，这将有助于正确认识玻璃钢抽油杆的作用和玻璃钢抽油杆的推广使用。将抽油杆柱简化成上端受光杆的激振位移、下端带有集中质量的弹簧－质量力学模型，建立了抽油杆柱纵向振动的偏微分方程和边界条件，然后用固有函数法求解方程，得出了抽油泵柱塞超冲程的无穷级数解析计算式。     

基于非线性规划的指数自回归模型的辨识

讨论了指数自回归模型的辨识问题，证明了该模型最小二乘估计的目标函数的非凸性，并给出了使该函数为凸的条件，最后给出了辨识该模型的算法及该算法的收敛性，并以数值例子加以说明。     

Growth and characterization of hot-wall epitaxial CdTe on (111) HgCdTe and CdZnTe substrates

Thin CdTe films were deposited by hot-wall epitaxy (HWE) on (111) HgCdTe and CdZnTe substrates at temperatures from about 140 to 335°C. X-ray rocking curves were used to show that crystal quality of the CdTe (111)B films improved as substrate temperature increased from 140 to about 250°C. Rocking curve values for full width at half maximum (FWHM) decreased from 2–4 degrees at 140–150°C to less than 100 arc-s at 250°C, and a FWHM of 59 arc-s was the lowest value observed near 250°C. The FWHM of the HWE CdTe was found to be insensitive to growth rate below about 400Å/min, but increased to four degrees at 1250Å/min. X-ray diffraction confirmed that films grown on the B-face at higher temperatures were epitaxial, but contained a significant volume fraction, 35% to 50%, of rotational in-plane twins. Electron microscopy confirmed a coarse twin density, and photoluminescence spectra showed an absence of excitonic emission in the HWE films. Simultaneous growth on two (111) HgCdTe substrates with different surface polarities between 230°C and 335°C showed that deposition rate on the A-face decreased relative to that on the B-face as temperature increased. Films grown on the B-face exhibited better surface morphologies than those grown on the A-face.     

泥沙起动条件及机理的非线性研究

 分析了单颗粒、均匀沙及非均匀沙的起动现象及其机理，认为泥沙的起动属于突变论研究的范畴。从泥沙起动所遵循起动条件的力学规律出发，导出泥沙起动条件方程。在此基础上，利用尖点突变性质对各种泥沙起动现象及机理进行了描述和说明。