注射成型模具排气槽的设计

塑料注射成型模具的排气方式和排气槽结构直接影响塑料制品质量。介绍了塑料注射成型模具的排气方式、排气槽设计经验以及切实可行的排气方案和排气槽结构。     

单向Cf/SiC复合材料的弯曲疲劳性能

对单向Cf/SiC复合材料进行了三点弯曲疲劳性能测试,得到了复合材料的应力－寿命曲线（S－N曲线）,并对其进行线性拟合,得到疲劳最大应力与复合材料疲劳寿命的关系;考察了疲劳过程中刚度下降和疲劳裂纹产生情况。结果表明在疲劳过程中复合材料的弯曲模量有3个变化阶段：首先在疲劳加载初期,弯曲模量的下降速度及幅度都较大;其次在弯曲模量下降到原始弯曲模量的85％（133GPa)后,其变化方式没有明显的规律可循,有时甚至可能上升;最后复合材料发生疲劳断裂时,模量将发生突变。显微结构分析表明：基体横向裂纹群的产生是疲劳断裂的独有特征。它的产生是由于基体SiC的断裂应变小于碳纤维的断裂应变,基体首先开裂并导致应力重新分布的结果。     

Synthesis and properties of aminopropyl nucleic acids

Oligonucleotides that contain up to three aminopropyl nucleoside analogues have been synthesized. Dimers of aminopropyl adenine and thymidine were prepared and used as building blocks by applying phosphoramidite chemistry. Both R and S isomers of the aminopropyl nucleosides were used. This incorporation led to a reduction of thermal stability of double-stranded DNA. Furthermore, the (R)-adenine analogue, which yielded (S)-APNA, can be considered as a candidate for universal base pairing.     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

A high propylene productivity over B2O3/SiO2@honeycomb cordierite catalyst for oxidative dehydrogenation of propane

Boron-based metal-free catalysts for oxidative dehydrogenation of propane (ODHP) have drawn great attention in both academia and industry due to their impressive activity and olefin selectivity. Herein, the SiO₂ and B₂O₃ sequentially coated honeycomb cordierite catalyst is designed by a two-step wash-coat method with different B₂O₃ loadings (0.1%-10%) and calcination temperatures (600, 700, 800 ℃). SiO₂ obtained by TEOS hydrolysis acts as a media layer to bridge the cordierite substrate and boron oxide via abundant Si-OH groups. The welldeveloped straight channels of honeycomb cordierite make it possible to carry out the reactor under high gas hourly space velocity (GHSV) and the thin wash-coated B₂O₃ layer can effectively facilitate the pore diffusion on the catalyst. The prepared B₂O₃/SiO₂@HC monolithic catalyst exhibits good catalytic performance at low boron oxide loading and achieves excellent propylene selectivity (86.0%), olefin selectivity (97.6%, propylene and ethylene) and negligible CO₂ (0.1%) at 16.9% propane conversion under high GHSV of 345,600 ml·(g B₂O₃)^-1·h^-1, leading to a high propylene space time yield of 15.7 g C₃H₆·(g B₂O₃)^-1·h^-1 by suppressing the overoxidation. The obtained results strongly indicate that the boron-based monolithic catalyst can be properly fabricated to warrant the high activity and high throughput with its high gas/surface ratio and straight channels.     

乙二醇合成的研究进展

介绍了环氧乙烷、乙二醇技术的进展，总结了国内外合成乙二技术研究、开发的最新成果：合成气直接合成法、甲醛电化学加氢二聚法、甲醇醚氧化偶联法、多元醇加氢裂解法等。     

Propylene epoxidation in a microreactor with electric heating

Gas phase propylene epoxidation on gold catalysts has attracted wide attention from industry and academia due to its high selectivity. However, it suffers from low propylene conversion and rapid catalyst deactivation. Experiments showed that propylene conversion could be increased by raising H₂, O₂, or C₃H₆ concentration in the feed, but the feed compositions were within the explosion limit. It was also shown that the activity of the used catalyst could be fully recovered, but the regeneration temperature was 280 °C, much higher than that for reaction. Therefore a microchannel reactor was devised to suppress explosion and was constructed with Fecralloy, to raise the temperature rapidly for catalyst regeneration by electric heating. In two minutes the temperature of the reactor could be raised from 50 to 300 °C. Catalysts were coated on the alloy belt by dip coating, and the performance of the reactor was evaluated under different operating conditions. Results showed that in the microreactor the overall reaction rate was controlled mainly by the intrinsic reaction rate, and also influenced by film diffusion to a certain extent. The deactivated catalyst was regenerated in the microchannel reactor and the activity was fully recovered.     

CO2在绿色化学合成中的应用

研究了CO2在绿色化学合成中的应用.CO2作为酸碱调节剂和惰性气体,在β-胡萝卜素催化氧化合成角黄素反应中,可以控制反应体系酸性,保护原料中的双键,减少副反应发生,提高催化氧化反应的选择性;异戊二烯氯醇化生成1-氯-2-甲基-3-丁烯-2-醇和1-氯-2-甲基-3-丁唏-4-醇反应中,CO2代替有机酸作酸碱调节剂,控制次氯酸的生成速度,达到调控反应的目的,反应条件温和,不副产固体.     

Preparation and self‐assembly of poly(diglycidyl maleate‐co‐stearyl methacrylate)

Poly(diglycidyl maleate‐co‐stearyl methacrylate) (P(DGMA‐co‐SMA)) with reactive epoxy groups was synthesized by reaction of poly(maleic anhydride‐co‐stearyl methacrylate) (P(MA‐co‐SMA)) and epichlorohydrin. The effect of precipitant on self‐assembly behaviors of the resultant copolymer was investigated. It was found that vesicles and nanotubule liked aggregates can be obtained through self‐assembly of P(DGMA‐co‐SMA) in THF solution using CH₃CH₂OH (EtOH) as precipitant while spheral aggregates can be obtained using H₂O as precipitant. The mechanism of the self‐assembly behavior was discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Trusted Integrated Circuits: The Problem and Challenges

Hardware security has become more and more important in current information security architecture. Recently collected reports have shown that there may have been considerable hardware attacks prepared for possible military usage from all over the world. Due to the intrinsic difference from software security, hardware security has some special features and challenges. In order to guarantee hardware security, academia has proposed the concept of trusted integrated circuits, which aims at a secure circulation of IC design, manufacture and chip using. This paper reviews the main problems of trusted integrated circuits, and concludes four key domains of the trusted IC, namely the trusted IC design, trusted manufacture, trusted IP protection, and trusted chip authentication. The main challenges in those domains are also analyzed based on the current known techniques. Finally, the main limitations of the current techniques and possible future trends are discussed.