Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method

A novel sol–gel method based on V₂O₅·nH₂O hydro-gel was developed to synthesize nanocrystalline Li₃V₂(PO₄)₃/carbon composite material. In this route, V₂O₅·nH₂O hydro-gel, NH₄H₂PO₄, Li₂CO₃ and high-surface-area carbon were used as starting materials to prepare precursor, and the Li₃V₂(PO₄)₃/carbon was obtained by sintering precursor at 750 °C for 4 h in flowing argon. The sol–gel synthesis ensures homogeneity of the precursors and improved reactivity. The sample was characterized by XRD, SEM and TEM. X-ray diffraction results show Li₃V₂(PO₄)₃ sample is monoclinic structure with the space group of P2₁/n. The TEM image indicates that the Li₃V₂(PO₄)₃ particles modified by conductive carbon are about 70 nm in diameter. The Li₃V₂(PO₄)₃/carbon system showed that the discharge capacities in the first and 50th cycle are about 155.3 and 143.6 mAh/g, respectively, in the range of 3.0–4.8 V. The sol–gel method is fit for the preparation of Li₃V₂(PO₄)₃/carbon composite material which may offer some favorable properties for commercial application.     

陶瓷坯体增强剂聚丙烯酸钠在艺术瓷成形过程的应用

本文合成了一系列不同相对分子质量的聚丙烯酸钠,应用于艺术瓷的坯体中,研究了聚丙烯酸钠对艺术瓷坯体强度、变形率的影响,并对聚丙烯酸钠增强机理进行了探讨。结果表明:聚丙烯酸钠可有效地提高艺术瓷坯体的成形强度,减少了坯体的变形率,当增强剂c加入的质量分数为0.6%时,坯体的干燥强度增加率达167.5%,坯体的变形率从50%降低到10%。     

国产核电厂蒸汽发生器下封头接管区模拟装置承受循环载荷能力的试验

国产核电厂蒸汽发生器下封头群孔接管区具有应力分布复杂、焊接施工条件差的特点。为考核其承受循环载荷的能力，设计制造了与实物相似的模拟试验装置，根据核电厂运行寿命期内的载荷特点，确定了模拟试验装置的试验载荷与试验循环数。循环加载试验的结果表明，蒸汽发生器下封头群孔接管区承受循环载荷的能力在寿命期内是符合要求的。     

金属阳极四元涂层开发现状浅析

通过分析金属阳极涂层结构，在现有金属阳极三元涂层的基础上，确定了钌、钛、铱、锡四元涂层。对该涂层的电化性能指标及实际运行数据进行了分析，并与三元涂层电化性能指标进行对比，说明了四元涂层在析氯电位、极化率、析氧电位、寿命等方面均明显优于三元涂层，而且更适合在高电流密度下运行。     

Electrochemical micromachining of nitinol by confined-etchant-layer technique

The confined etchant layer technique has been applied to fabricate complex three-dimensional microstructures on nitinol for the first time. HF and HNO₃ were locally and simultaneously electrogenerated at the mold surface to etch a nitinol workpiece. NaOH was used as an efficient scavenger to confine the etchant close to the mold. Cyclic voltammetry was employed to study the electrochemical behavior of a Pt electrode in the etching solution in order to choose an appropriate potential for etchant generation on the mold. The thickness of the confined etchant layer was estimated to be several micrometers by inspecting the deviation of the sizes of the etched spots from the sizes of those on the microelectrode. Thus, the composition of the electrolyte could be optimized for better etching precision. By optimizing the composition of the electrolyte, complex microstructures on a Pt-Ir mold bearing the logo “XMU” of Xiamen University were successfully fabricated on nitinol. The etched patterns were approximately negative copies of the mold, and the precision of duplication could easily reach the micrometer scale.     

A comparative analysis of evolutionary and memetic algorithms for community detection from signed social networks

To detect communities in signed networks consisting of both positive and negative links, two new evolutionary algorithms (EAs) and two new memetic algorithms (MAs) are proposed and compared. Furthermore, two measures, namely the improved modularity Q and the improved modularity density D-value, are used as the objective functions. The improved measures not only preserve all properties of the original ones, but also have the ability of dealing with negative links. Moreover, D-value can also control the partition to different resolutions. To fully investigate the performance of these four algorithms and the two objective functions, benchmark social networks and various large-scale randomly generated signed networks are used in the experiments. The experimental results not only show the capability and high efficiency of the four algorithms in successfully detecting communities from signed networks, but also indicate that the two MAs outperform the two EAs in terms of the solution quality and the computational cost. Moreover, by tuning the parameter in D-value, the four algorithms have the multi-resolution ability.     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

悬浮体两相流动和燃烧数值模拟现状及发展

本文阐述了含颗粒的液体或气体两相流动及其燃烧的数值模拟近十几年来的发展,指出处理颗粒相的基本论点,扼要说明了单流体模型,分散群模型及双连续介质(双流体)模型的基本内容,方法及其应用结果,评述了其现况.文中各部分都包含了作者本人的贡献及所提出的新论点,也包括了作者提出的新模型,文中最后指出了今后发展趋势.