陶瓷坯体增强剂聚丙烯酸钠在艺术瓷成形过程的应用

本文合成了一系列不同相对分子质量的聚丙烯酸钠,应用于艺术瓷的坯体中,研究了聚丙烯酸钠对艺术瓷坯体强度、变形率的影响,并对聚丙烯酸钠增强机理进行了探讨。结果表明:聚丙烯酸钠可有效地提高艺术瓷坯体的成形强度,减少了坯体的变形率,当增强剂c加入的质量分数为0.6%时,坯体的干燥强度增加率达167.5%,坯体的变形率从50%降低到10%。     

国产核电厂蒸汽发生器下封头接管区模拟装置承受循环载荷能力的试验

国产核电厂蒸汽发生器下封头群孔接管区具有应力分布复杂、焊接施工条件差的特点。为考核其承受循环载荷的能力，设计制造了与实物相似的模拟试验装置，根据核电厂运行寿命期内的载荷特点，确定了模拟试验装置的试验载荷与试验循环数。循环加载试验的结果表明，蒸汽发生器下封头群孔接管区承受循环载荷的能力在寿命期内是符合要求的。     

变电站典型光通信模式研究

目前,通信条件已发生了革命性的变化,由早期的载波、微波和电缆等通信介质发展成为以光缆为主的通信网络.电力系统以OPGW光缆、ADSS光缆为主,已覆盖了几乎所有的输变电场所.因此,应建立与之适应的通信模式.通过研究现代通信条件、变电站通信的需求,提出了统一化的、简单的变电站通信模式.     

Morphologies-Controlled Synthesis and Optical Properties of Bismuth Tungstate Nanocrystals by a Low-Temperature Molten Salt Method

Well-crystallized bismuth tungstate (Bi₂WO₆) powders with different morphologies were successfully synthesized via a low-temperature molten salt method. The powders were characterized by X-ray diffraction, transmission electron microscopy, and UV-Vis, respectively. It was found that the variation of morphology of the obtained Bi₂WO₆ powder mainly depends on the different reaction temperatures and the weight ratio of LiNO₃–NaNO₃ salt to precursor. In addition, the UV-Visible absorption spectra showed that the synthesized powders had strong light absorption properties not only in the ultraviolet light but also in the visible light region.     

悬浮体两相流动和燃烧数值模拟现状及发展

本文阐述了含颗粒的液体或气体两相流动及其燃烧的数值模拟近十几年来的发展,指出处理颗粒相的基本论点,扼要说明了单流体模型,分散群模型及双连续介质(双流体)模型的基本内容,方法及其应用结果,评述了其现况.文中各部分都包含了作者本人的贡献及所提出的新论点,也包括了作者提出的新模型,文中最后指出了今后发展趋势.     

粉尘含碳球团还原方式及气氛对其还原挥发性能的影响

在1150℃和1250℃、0．1L／min和10L／min的气量下，对通人含不同CO2量的氮气影响粉尘含碳球团还原速度的实验研究表明：以滚动方式所造球团中，氧化物的还原完全以间接还原的方式进行，气氛中非还原气体流速（或流量）的增加对粉尘含碳球团氧化铁还原速度有显著的降低作用，但还原温度提高则对气量增加造成的氧化铁还原速度降低有显著的抵消作用．气氛对球团中锌的挥发速度影响很小，对铅的挥发速度几乎不产生影响．     

浅论食品添加剂的安全性

介绍了食品添加剂的定义、分类和作用 ,分析了国内外食品添加剂的现状、发展前景及存在的问题 ,综述了食品添加剂的安全性问题及监督管理办法。     

Experiments of a prototype wind-driven reverse osmosis desalination system with feedback control

A prototype wind-powered reverse osmosis desalination system was constructed and tested on Coconut Island off the northern coast of Oahu, Hawaii, for brackish water desalination. The system has four major subsystems: a multi-vaned windmill/pump, a flow/pressure stabilizer, a reverse osmosis module, and a control mechanism. The feedback control mechanism, developed by this study, allowed this prototype system to be operated satisfactorily under mild ambient wind of 5 m/s or less. No auxiliary power source was needed. The system operational data showed that at an average wind speed of 5 m/s, brackish feedwater at a total dissolved solids concentration of 3000 mg/1 and at a flow rate of 13 1/min could be processed by this system. The average rejection rate of this prototype system was 97% and the average recovery ratio was 20%. The energy efficiency of the system was measured at 3 5%, which is comparable to the typical energy efficiency of well-operated multi-vaned windmills. Generally, the system's energy efficiency decreases as wind speed increases.