冬季CO2水玻璃砂促硬防蠕变技术

介绍了使用一种专用改性荆加入普通水玻璃中，使CO2水玻璃砂在低温环境下也能速硬，可防止铸型（芯）蠕变的技术。     

用原料添加法提高钼粉粒度的探讨

叙述了在钼粉的工业化生产条件下采用原料添加法来提高最终粉末粒度，改善原料工艺性能的试验。研究表明：在钼酸铵原料中添加一定组份的钥粉，能有效地改善钼酸铵在动态焙解还原时的分散性和流动性，选择不同的添加量和添加粉粒度，可有效地把钼粉的ＦＳＳＳ粒度从２．５μｍ提高到４．２μｍ，从而可根据用粉要求，选择合适的添加工艺，来制取理想的钼粉。     

镁合金与钛合金的瞬间液相扩散焊

为实现镁合金AZ31B与钛合金Ti6A14V的可靠连接，研究了两者以Al为中间层的瞬间液相扩散焊接头的微观结构与连接强度。研究结果表明：当焊接时间为180min时，焊接温度是影响界面反应热力学与动力学的主要参数，其对接头的微观组织、接头界面新生相构成与连接强度有重要影响。保温温度低于450℃时，AZ3IB／AI界面无液相产生，无法实现AZ31B与Ti6A14V的可靠连接；保温温度在450℃～480℃变化时，温度对AZ31B／Al／Ti6A14V界面反应的动力学因素有明显影响，且直接决定了焊后接头新生相的构成与分布。470℃保温180min的接头剪切强度较高（72．4MPa），达到AZ31B母材（86MPa）的84．2％。     

Ti—Al二元合金的成分对组织和力学性能的影响

用金相、扫描电镜和X射线衍射研究了6种不同Al含量Ti-Al二元合金铸态和退火态的组织结构和相组成的特征和变化。从结晶动力学的观点,分析了合金的结晶凝固过程。采用三点弯曲方法研究了合金的抗弯性能同Al含量的关系。结果表明,Al含量为34 wt%,经1100℃/30 h退火的合金抗弯性能最好,Al含量偏离34wt%,都对合金的力学性能不利。     

喷射成形与铸造7A60合金的微观组织对比研究

利用喷射成形技术制备了7A60合金。借助扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD）等手段研究了喷射成形与铸造7A60合金微观组织的特点。结果表明，铸造7A60合金的组织粗大，偏析严重。喷射成形7A60合金主要由细化的等轴晶组成，无明显偏析。与传统铸锭冶金工艺相比，喷射成形工艺大大提高了冷却速率，显著细化了7A60合金的微观组织。     

齿轮精锻的数值模拟与实验研究

本文对空心直齿圆柱齿轮的精锻成形过程进行三维刚塑性有限元模拟和实验研究。通过有限元数值模拟和实验研究 ,得出了直齿圆柱齿轮精锻过程的金属流动规律和变形力学特征 ,揭示了直齿圆柱齿轮精锻过程的变形机理 ,数值模拟结果与实验结果吻合较好     

肥料防结块缓释概况及性能快速表征方法探讨

介绍了颗粒肥料结块的原因机理、影响因素和传统的处理方法。简述了缓释肥料的特点、类型、加工方法以及国内外的研究发展状况。模拟肥料贮存、运输和施用环境以及设计装置，对颗粒肥料防结块、缓释性能快速表征方法进行了有益的探讨。对不同包膜尿素的测试结果表明，所设计的肥料养分释放模拟装置具有较好的应用前景。     

Synthesis and Characterization of 2-(Dimethylamino)ethyl Methacrylate Homopolymers via aqueous RAFT Polymerization and Their Application in Miniemulsion Polymerization

Summary Homopolymers of 2-(dimethylamino)ethyl methacrylate (DMAEMA) have been synthesized directly in aqueous media by reversible addition-fragmentation chain transfer polymerization (RAFT) using 4,4-azobis(4-cyanopentanoic acid) (V501) as a water-soluble azo initiator and 4-cyanopentanoic acid dithiobenzoate (CPADB) as a chain transfer agent. The resulting polymers were controlled in the range of narrow molecular weight distributions, with lower than 1.3. Using the produced dithioester-capped DMAEMA homopolymer as a macro chain transfer agent, miniemulsion RAFT polymerization of methyl methacrylate and styrene were carried out, respectively. ¹H NMR analysis showed that the diblock copolymer PDMAEMA-b-PMMA in the form of stable latices was obtained as expected. This revised version was published online at the end of November 2004. Unfortunately, the received date was incorrect due to a technical problem.     

景德镇民营陶瓷企业发展特点及其探讨

分析了景德镇民营陶瓷企业发展特点及其目前存在的问题，并就加快今后景德镇民营陶瓷企业发展步伐提出了几点建议。     

An ergonomics study of thumb movements on smartphone touch screen

This study investigated the relationships between thumb muscle activity and thumb operating tasks on a smartphone touch screen with one-hand posture. Six muscles in the right thumb and forearm were targeted in this study, namely adductor pollicis, flexor pollicis brevis, abductor pollicis brevis (APB), abductor pollicis longus, first dorsal interosseous (FDI) and extensor digitorum. The performance measures showed that the thumb developed fatigue rapidly when tapping on smaller buttons (diameter: 9 mm compared with 3 mm), and moved more slowly in flexion–extension than in adduction–abduction orientation. Meanwhile, the electromyography and perceived exertion values of FDI significantly increased in small button and flexion–extension tasks, while those of APB were greater in the adduction–abduction task. This study reveals that muscle effort among thumb muscles on a touch screen smartphone varies according to the task, and suggests that the use of small touch buttons should be minimised for better thumb performance.