Dendritic Growth in an Aluminum-Silicon Alloy

Unidirectional solidification experiments have been carried out on an Al-3 wt.% Si alloy as a function of temperature gradient, G and growth rate, V. The samples were solidified under steady-state conditions with a constant growth rate of 8.20 μm/s at different temperature gradients (1.97-6.84 K/mm) and with a constant temperature gradient (6.84 K/mm) at different growth rates (8.20-492.76 μm/s). Microstructure parameters (primary dendrite arm spacing, λ₁, secondary dendrite arm spacing, λ₂, dendrite tip radius, R and mushy zone depth, d) were measured as a function of temperature gradient and growth rate. The experimental results have been compared with the current theoretical models and similar experimental works.     

Effects of eccentricity defect on the nonlinear dynamic behavior of the mechanism clutch-helical two stage gear

This paper investigates the nonlinear dynamic behavior of an automotive clutch coupled with a helical two stage gear system. The nonlinear dynamic model is simulated by twenty seven degrees of freedom and including three types of nonlinearity: dry friction path, double stage stiffness and spline clearance. The utility of the proposed nonlinear model is illustrated by the industrial need to clearly identify the dynamic behavior of mechanical elements (shafts, bearings, gears, flywheel, pressure plate, hub of the clutch…) and reduce vibration. The governing nonlinear time varying motion equation formulated is resolved by the analytic Runge Kutta method.Then the modeling of the eccentricity defect located on the gear and the flywheel of the clutch is done. The effect of this defect on the nonlinear dynamic behavior of the system is investigated.     

Removal of tetracycline antibiotic by Lemna gibba L. from aqueous solutions

In this study, the efficiency of Lemna gibba L. on tetracycline (TC) removal from the solutions prepared at various initial TC concentrations (50, 100 and 300 µg/L) was investigated. The study was conducted in the reactors planted with Lemna gibba L. plants. Lemna gibba L. plants in the reactors were harvested at various hydraulic retention times. Then, the concentrations of TC were determined by using LC/‐MS‐MS. The maximum removal efficiencies for the TC50, TC100 and TC300 in the planted reactors were 99.8 ± 4.1; 99.9 ± 4.9 and 99 ± 4.9%, respectively. The harvesting times for Lemna gibba L. at TC50, TC100 and TC300 concentrations were determined to be 12, 8 and 12 hours, respectively. First‐, second‐ and pseudo‐first‐order kinetics are determined in the planted reactors (with Lemna gibba L.). According to the study results, second‐order kinetics were obtained at TC50, TC100, TC300 concentrations. As a result, the Lemna gibba L. plant can be used as an alternative treatment method to other advanced treatment methods and it can be done with a cheap method by adapting to existing treatment plants. Lemna gibba L. plants can be used to remove pollutants by applying them to polluted lakes and water bodies.     

Effect of solidification parameters on the microstructure of directionally solidified Sn-Bi-Zn lead-free solder

Sn-Bi-Zn lead free solder alloy was directionally solidified upward at a constant temperature gradient (G=3.99 K/mm) with a wide range of growth rates (8.3–478.6 μm/s) and at a constant growth rate (V=8.3 μm/s) with a wide range of temperature gradients (1.78–3.99 K/mm) using a Bridgman type directional solidification furnace. Wavelength-Dispersive X-ray Fluorescence spectrometry and X-ray diffraction were used to identify the compositions and phases in the microstructure. Dependence of eutectic spacings (λ) on the growth rate (V), temperature gradient (G) and cooling rate (Ṫ) were determined using linear regression analysis. From the experimental results, it can be concluded that the values of λ decrease with the increasing the values of V, G and Ṫ. The value of λ²V was determined using the measured values of λ and V. The results obtained in the present work have been compared with previous results obtained for binary or ternary alloys.     

TD-DFT and optical properties of 9,9-dioctyl-9Hfluorene-based oligomer in a thin film and design of DFB laser using ellipsometry studies

Journal of Materials Science: Materials in Electronics - 9,9-dioctyl-9H-fluorene (9DOF) is one of the most important molecule structures with unique photophysical properties. We investigated the...     

Validation of Multi‐scale Model Describing Microstructure Evolution in Steels

Properties of deformed steels depend on various microstructure parameters such as distribution of grain size and precipitates. Strain, strain rate and temperature inhomogeneities make quantitative prediction of microstructure difficult but the Finite Element method is able to model these inhomogeneities. Different scales of phenomena occurring in deformed materials are another difficulty in modelling. Microstructure evolution can be described by more realistic methods (e.g. Cellular Automata CA, Monte Carlo), which, on the other hand, are unable to simulate larger samples. Therefore, development of the methods capable of spanning multiple scales became a current challenge. CAFE modelling, which couples FE and CA methods, is the objective of the paper. The model consists of two layers. The micro‐scale layer, simulated by CA, represents microstructure evolution including nucleation and growth of the grains. Evolution of a dislocation density is described for every grain separately by solving differential equation. The FE thermal‐mechanical model is used as a macro‐scale part. Multistage plane strain compression tests for niobium steel are considered. Distributions of initial and final grain size are measured during the tests. The results from the CAFE model are compared to the measurements and to the predictions by a conventional model. The comparisons confirm the capability of the CAFE method to predict flow stress, recrystallized fraction and grain size distribution. Conventional approach gives a good agreement with experiments for an average grain size only.     

Collaborative video searching on a tabletop

Almost all system and application design for multimedia systems is based around a single user working in isolation to perform some task yet much of the work for which we use computers to help us, is based on working collaboratively with colleagues. Groupware systems do support user collaboration but typically this is supported through software and users still physically work independently. Tabletop systems, such as the DiamondTouch from MERL, are interface devices which support direct user collaboration on a tabletop. When a tabletop is used as the interface for a multimedia system, such as a video search system, then this kind of direct collaboration raises many questions for system design. In this paper we present a tabletop system for supporting a pair of users in a video search task and we evaluate the system not only in terms of search performance but also in terms of user–user interaction and how different user personalities within each pair of searchers impacts search performance and user interaction. Incorporating the user into the system evaluation as we have done here reveals several interesting results and has important ramifications for the design of a multimedia search system.     

A set partitioning based goal programming model for the team formation problem

In this paper, we offer a multi-objective set-partitioning formulation for team formation problems using goal programming. Instead of selecting team members to teams, we select suitable teams from a set of teams. This set is generated using a heuristic algorithm that uses the social network of potential team members. We then utilize the proposed multi-objective formulation to select the desired number of teams from this set that meets the skill requirements. Therefore, we ensure that selected teams include individuals with the required skills and effective communication with each other. Two real datasets are used to test the model. The results obtained with the proposed solution are compared with two well-known approaches: weighted and lexicographic goal programming. Results reveal that weighted and lexicographic goal programming approaches generate almost identical solutions for the datasets tested. Our approach, on the other hand, mostly picks teams with lower communication costs. Even in some cases, better solutions are obtained with the proposed approach. Findings show that the developed solution approach is a promising approach to handle team formation problems.     

The influence of hydroxyapatite: Zinc oxide ratio on the setting behavior and mechanical properties of polyalkenoate cements

The influence of hydroxyapatite (HA) content on the setting behavior and mechanical properties of hydroxyapatite-zinc oxide-poly(acrylic acid) (HA-ZnO-PAA) composite cements were investigated as a function of HA content. The working time increased with HA content up to 45 wt % HA and then decreased whilst the setting time increased with increasing HA content. Mechanical properties were determined after storage in water at 37 degrees C for 1, 7 and 28 days. Young's moduli and compressive strength go through a maximum at approximately 30 and 45 wt % HA. Young's modulus increases with time, which is consistent with an ongoing crosslinking reaction.     

Perceptual Evaluation of Color‐to‐Grayscale Image Conversions

Color images often have to be converted to grayscale for reproduction, artistic purposes, or for subsequent processing. Methods performing the conversion of color images to grayscale aim to retain as much information about the original color image as possible, while simultaneously producing perceptually plausible grayscale results. Recently, many methods of conversion have been proposed, but their performance has not yet been assessed. Therefore, the strengths and weaknesses of color‐to‐grayscale conversions are not known. In this paper, we present the results of two subjective experiments in which a total of 24 color images were converted to grayscale using seven state‐of‐the‐art conversions and evaluated by 119 human subjects using a paired comparison paradigm. We surveyed nearly 20000 human responses and used them to evaluate the accuracy and preference of the color‐to‐grayscale conversions. To the best of our knowledge, the study presented in this paper is the first perceptual evaluation of color‐to‐grayscale conversions. Besides exposing the strengths and weaknesses of the researched methods, the aim of the study is to attain a deeper understanding of the examined field, which can accelerate the progress of color‐to‐grayscale conversion.