Contamination bacterienne d'une zone balneaire liee a sa frequentation

The bacterial contamination from bathers in the water and sand at a beach was investigated. Measurements were made of the composition of the cutaneous bacterial flora released by two bathers as well as the sensitivity of the main contaminants to solar radiation. The variations in bacterial concentration of the sea water and sand were determined at the sea shore over three complete day cycles. Broadly speaking, the concentration of some bacteria increases with the frequency with which the beach is used. Nevertheless, short-period variations seem to be masked by the opposing effects of solar radiation and bathers.     

Effects of adding organic materials to an acid sulfate soil on the growth of cocoa (Theobroma cacao L.) seedlings

Acid sulfate soils having a pH of less than 3.5 are widespread in Malaysia. Some of these soils are planted to cocoa, but the yield is reported to be low due to soil infertility related to Al toxicity. Cocoa growth is sensitive to the presence of Al in the soil. To a certain extent, Al toxicity in soils can be reduced by organic matter application and to a greater extent in iron-poor acid sulfate soil. A study was conducted to determine the efficacy of various types of organic materials easily available in the country to ameliorate acid sulfate soil infertility for growing cocoa seedlings. The treatments were control (nil), lime (3 t/ha), peat (10% w/w), peat plus green manure (10% w/w), peat plus rice straw (10% w/w), peat plus chicken dung (10% w/w) and peat plus POMS (Palm oil mill sludge) (10% w/w). The growth of cocoa seedlings was affected significantly by the presence of Al in the cocoa tissues. As the amount of Al in the leaves increased, the relative top dry weight of cocoa seedlings decreased. Likewise, the relative plant height was negatively correlated with Al in the leaves. Peat as well as peat in combination with green manure, rice straw, chicken dung or palm oil mill sludge was able to reduce Al toxicity in acid sulfate soil; the highest top dry weight of cocoa seedlings were obtained in the peat plus green manure treatment. The best cocoa seedlings root growth was found for the peat treatment alone. The relative top dry weight of cocoa seedlings was negatively correlated with Al(3+) as well as Al(3+)+Al(OH)(2+)+Al(OH)(2)(+) activity in the soil solution. The critical values for Al(3+) and the combination of Al(3+)+Al(OH)(2+)+Al(OH)(2)(+) activity in the soil solution were 10 microM and 15 microM, respectively.     

Activated charcoal and microflora in water treatment

Significant sanitation was achieved by using 0.5% activated charcoal in influent and effluent of a wastewater treatment plant. The drastic reduction in the microorganisms was confirmed for twelve tester strains, including gram-positives, gram-negatives, Candida albicans, Vahlkampfia avara, Leptospira biflexa and Trichomonas foetus. The removal of microflora correlates positively with the quality of the activated charcoal used. Once adsorbed, the bacteria could not be eluted by salt, alkalinization or citric acid. Diatomaceous earth also eliminated some of the microflora, but white clay (Bolus alba) and zinc dust are inefficient. The activated carbon may be reused several times after regeneration by heat (2 h at 160°C), but eventually a slight decrease in adsorbing capacity occurs.     

The collapse of welded aluminium plate girders—an experimental study

Twenty-two tests conducted to study the collapse behaviour of welded aluminium girders are described. The girders are of varying proportions, have transverse or longitudinal web stiffeners and are subjected to different combinations of shear and bending loads. It is observed that, although shear sway mechanisms similar to those for steel girders do develop, the webs of aluminium girders may fracture in the heat affected zones adjacent to the perimeter welds. These fractures develop at some stage during the formation of the collapse mechanism and are the consequence, rather than the cause, of failure. It is shown that the tension field theory, originally developed for steel girders, may overestimate the shear-carrying capacity of aluminium girders and it is concluded that the theory requires some modification before it can be applied with confidence to aluminium girders.     

Online Documentation for Engineering Software: A Hypertext Application

Abstract: This article describes the use of 'hypertext' as a means to document engineering software online. An extensive hypertext document can be built with relative ease using an authoring tool. Hypertext documents enhance the learning process through the association of facts. The user has the freedom to arrange his/her own study sequence in a particular session. The article provides a brief introduction to the hypertext technology and authoring tools, and describes a Mohr's Circle program, which has been developed to explore the use of hypertext for online users' manuals. The strengths and weaknesses of the software tool, KnowledgePro, as well as the development techniques, are discussed.     

The manual determination of ammonia in fresh waters using an ammonia-sensitive membrane-electrode

The use of a commercially-available ammonia-sensitive membrane-electrode for the manual determination of ammonia in discrete samples of fresh water has been investigated and the analytical procedure is described. The electrode is simple and convenient to use, and a sample can be analyzed in a few minutes. For normal routine analysis, the lower limit of determination is approximately 0·1 mg N 1⁻¹ though smaller concentrations can be measured. The relative standard deviation of analytical results varied from approximately 10 to 3 per cent as ammonia concentration increased from 0·1 to 4 mg N 1⁻¹. Results for samples of river water agreed well with those obtained by absorptiometric methods of analysis; the electrode responds to amines but otherwise appears to be essentially specific for ammonia. Use of the electrode will be advantageous in a number of applications, and it also has good potential for the on-line analysis of fresh waters.     

SEM-EDX analysis in the source apportionment of particulate matter on Hypogymnia physodes lichen transplants around the Cu smelter and former mining town of Karabash, South Urals, Russia

Scanning electron microscopy with energy-dispersive X-ray analysis (SEM-EDX) of particulate matter on lichen transplant thalli (Hypogymnia physodes) was assessed as a complementary technique to wet chemical analysis for source apportionment of airborne contaminants. Transplants (2 month exposure) stationed in the Cu smelter and former mining town of Karabash were compared with those from a control site 30 km south. Particulate matter in Karabash samples (715 analyses) showed higher levels of S, Pb, Cu, Sn and Zn compared with the control (598 analyses). Complex element associations among the particles confounded detailed mineralogical identifications, and therefore a simplified particle classification scheme was devised for source apportionment. Karabash samples contained high levels of particles classified as mining-related (MRP), and these were also identified in control samples, indicating wide spatial dispersion from the smelter and highlighting the sensitivity of the method. It was noted that MRP <2.5-microm diameter were poorly represented on lichen surfaces suggesting this may limit the usefulness of Hypogymnia transplants as proxies when assessing human health impacts from airborne particulates. Analyses of the lichen thallus surface (away from surface particulates) revealed high levels of Cu, Zn, Fe and Pb associated with organics in the Karabash samples compared with the control, with a proportionate loss of K, interpreted as being due to a stress-related increase in cell membrane permeability. This type of analysis may provide a novel SEM-EDX-based method for assessing lichen vitality. The techniques developed are presented and further implications of the study are discussed.     

Design of tall bridge piers by ant colony optimization

This paper describes a methodology for the analysis and design of Reinforced Concrete (RC) tall bridge piers with hollow rectangular sections, which are typically used in deep valley bridge viaducts. Piers are usually considered tall when the shaft has a height of 50 m or more. Three different types of rectangular hollow tall piers have been studied for road piers of 90.00 m in height: RTRA90, RLON90 and RLT90. RTRA90 has the two side walls inclined, RLON90 has the two frontal walls inclined and RLT90 has all four walls inclined. The procedure used in the present study to solve the combinatorial problem is a variant of the ant colony optimization. RTRA90 leads to the most economical pier, both in column and foundation cost, since it is the most efficient set up for horizontal loads. Regarding the cost of the vertical column only, i.e. excluding the foundation, the cost of RTRA90 and RLON90 are similar, but the cost of the column RLT90 is higher due to its larger unit cost of interior formwork.