排序方式: 共有13条查询结果,搜索用时 46 毫秒
1.
2.
3.
Reactive oxygen species (ROS) at physiological concentrations may be required for normal cell function. Excessive production of ROS can be detrimental to cells, because ROS can cause oxidative damage to lipids, proteins, and DNA. Herein, we describe the isolation and purification of a novel antioxidant protein the water extract of dried, powdered Sundakai (Solanum torvum [Solanaceae]) seeds. Sundakai belongs to the Solanaceae family, a small shrub, which is distributed widely in India, Malaya, China, Phillipines and tropical America. Fifty percent of ammonium sulphate-precipitated crude water extract was fractionated on a Sephadex G100 column, which yielded two peaks, PI and PII. Peaks PI and PII inhibited lipid peroxidation up to 40% and 89%, respectively in linolenic acid micelles. Rechromatographing of peak PII on Sephadex G100 yielded a single peak, indicating the homogeneity of the purified protein. SDS–PAGE analysis indicated the molecular weight of the purified protein to be ∼28 kDa. The purified protein, at 0.8 μM, inhibited deoxyribose degradation induced by generation of hydroxyl radicals by 90% and scavenged DPPH (1,1-diphenyl-2-picrylhydrazyl) radicals by 76%. The reducing power and chelating power of the purified protein, at 0.8 μM, were found to be 72% and 85%, respectively. The protein, at 0.8 μM, also offered significant protection to calf thymus DNA damage induced by H2O2 (1 mM). Therefore, the present study demonstrates, for the first time, a novel protein from the water extract of Sundakai seeds as an excellent antioxidant. 相似文献
4.
S Marappan PS Veitch WW Barrie S McCulley C Barr 《Canadian Metallurgical Quarterly》1996,78(4):359-362
Conventional hernia repair is effective in terms of cure but is associated with considerable postoperative pain and delay in return to normal activity. Laparoscopic repair has the potential to reduce pain and speed return to normal activity, but there have been few published reports of the outcome of this operation in the UK. We present a prospective audit of 94 patients who underwent laparoscopic repair. Of the 94 patients, 87 (92.6%) were male and 7 (7.4%) were female. Thirteen of the repairs were bilateral and 12 were recurrent. Two had to be converted to open repair. The mean operating time for unilateral repair was 56 min and for bilateral repair 98 min. Sixty-three patients (67%) were discharged within 24 h and 21 (22.4%) were discharged within 48 h. There were minor complications in 20 patients (21%), eight of whom (8.5%) developed a haematoma. The other minor complications included seromas (2), bruising at the site of the entry port (2), hyperaesthesia in the groin (2), port hernia (1), shoulder tip pain after surgery (3) and postoperative urinary retention (2). Nine (9.5%) patients claimed to have had no pain or discomfort at all; 35 (37.2%) were pain and discomfort free in 2 weeks. Thirty-two (34%) patients returned to normal activities in 2 weeks. With a median follow-up of 8 months 3 (3.2%) recurrences were noted. It is emphasised that this series represents a learning curve and that the operation is developmental. We are now restricting laparoscopic repair to recurrent and bilateral hernias where the technique offers particular advantages. 相似文献
5.
Navakoteswara Rao Vempuluru Cheralathan Kanakkampalayam Krishnan Ravi Parnapalli Jayaramakrishnan Velusamy Sathish Marappan Sudhagar Pitchaimuthu Mamathakumari Murikinati Shankar Muthukonda Venkatakrishnan 《Ceramics International》2021,47(7):10206-10215
This work explores the critical role of NiO co-catalyst assembled on the surface of a CuS primary photocatalyst which effectively improves interface properties and enhances solar-to-hydrogen production by prolonging lifetime of photo-excitons generated at the CuS surface. The nanoscale CuS/NiO heterojunction is formulated using hydrothermal and wet impregnation methods. The resultant CuS/NiO composite shows optical absorbance between 380 and 780 nm region. The type-II energetic structure formed at CuS/NiO heterojunction facilitates rapid charge separation and as a result, the CuS/NiO composite exhibits 13 folds higher photocatalytic water splitting performance than CuO and NiO. The champion CuO/NiO photocatalyst is first identified by screening the catalysts using a preliminary water splitting test reaction under natural Sunlight irradiation. After the optimization of the catalyst, it was further explored for enhanced photocatalytic hydrogen production using different organic substances dispersed in water (alcohols, amine and organic acids). The champion CuS/NiO catalyst (CPN-2) exhibited the photocatalytic hydrogen production rate of 52.3 mmol h?1.g?1cat in the presence of lactic acid-based aqueous electrolyte and, it is superior than hydrogen production rate obtained in the presence of other organic substances (triethanolamine, glycerol, ethylene glycol, methanol) tested under identical experimental conditions. These results indicate that the energetic structure of CuS/NiO photocatalyst is favorable for photocatalytic oxidation or reforming of lactic acid. The oxidation of lactic acid contributes both protons and electrons for enhanced hydrogen generation as well as protects CuS from photocorrosion. The modification of surface property and energetic structure of CuS photocatalyst by the NiO co-catalyst improves photogenerated charge carrier separation and in turn enhances the solar-to-hydrogen generation efficiency. The recyclability tests showed the potential of CPN-2 photocatalyst for prolonged photocatalytic hydrogen production while continuous supply of lactic acid feedstock is available. 相似文献
6.
Wireless Networks - Energy efficiency is an important parameter in the research area related to the design of routing protocols for Wireless Sensor Networks (WSNs). The consumption of energy during... 相似文献
7.
Marappan Velusamy Jiun‐Yi Shen Jiann T. Lin Yi‐Chih Lin Cheng‐Chih Hsieh Chin‐Hung Lai Chih‐Wei Lai Mei‐Lin Ho Yu‐Chun Chen Pi‐Tai Chou Jong‐Kai Hsiao 《Advanced functional materials》2009,19(15):2388-2397
A new series of quadrupolar type two‐photon absorption (2PA) chromophores 3 – 9 bearing a core arylamine‐[a,c]phenazine‐arylamine motif are synthesized in high yields. Palladium‐catalyzed Stille coupling and C? N coupling reactions are utilized to prepare target chromophores. Detailed characterization and systematic studies of these molecules, including absorption and fluorescence emission, are conducted. These compounds are found to exhibit very large 2PA cross section values, for example, ~7000 GM at 800 nm for 8 in toluene. Two‐photon‐induced fluorescence imaging is successfully demonstrated in vitro using compound‐ 8 ‐encapsulated silica nanoparticles with excellent bio‐compatibility. In combination with the capability of both one‐ and two‐photon singlet‐oxygen sensitizations, this nanocomposite demonstrates its promising potential in dual functionality toward two‐photon fluorescence imaging and two‐photon photodynamic therapy. 相似文献
8.
Manganese phosphate coatings are widely used as pretreatment for corrosion and wear resistance of numerous automotive components. Manganese phosphating formulations are established with various additives to improve the coating weight besides achieving the required amount of iron dissolution in a shorter time. The aim of our investigation is to use permanganate as an additive to increase iron dissolution and to achieve subsequent improvement in the quality of manganese phosphate coating. Manganese carbonate, phosphoric acid, nitric acid are used to create a basic formulation in which permanganate concentration is varied. The composition of the final formulation is optimised by giving due consideration to higher iron dissolution and improved coating weight. The resultant coating is characterised with polarisation, electrochemical impedance spectroscopy (EIS), FT-IR, XRD, SEM and EDX. The kinetics of the coating formation is also followed using potential–time measurement for all the experimental baths. Kinetic studies showed earlier attainment of point of incipient precipitation of manganese phosphate coating in the optimised formulation when compared to other formulation under investigation. The study revealed that the addition of KMnO4 in the manganese phosphating bath enabled an increase in the rate of metal dissolution, and enrichment of ferrous ion concentration at the metal/solution interface thus, favoured precipitation of corrosion and wear resistant Hureaulite ((Mn,Fe)5H2(PO4)4.4H2O). For a given coating weight, addition of KMnO4 substantially reduced the processing time. 相似文献
9.
Marappan Gobinath Reji Rence P. Mohan Vigneshwaran Lakshmi Kumar T. V. Sivalingam Yuvaraj Surya Velappa Jayaraman 《Journal of Materials Science: Materials in Electronics》2022,33(12):9590-9598
Journal of Materials Science: Materials in Electronics - In this work, we have measured the surface photovoltage of airborne particulate matter of size up to 10 microns (PM10) through scanning... 相似文献
10.