智能仪表LDE点阵显示模块的设计

提出了一种智能仪表LED点阵显示模块的设计方案，与通用的LED数码管显示方式相比，该方案更为灵活，不仅可以以多种方式显示测量值的幅值，而且可以显示汉字、特殊图符等，实现了仪表汉字和图形混合显示。     

Hot-Air Drying and Rehydration Characteristics of Red Kidney Bean Seeds

The effects of pretreatments such as citric acid and hot water blanching and air temperature on drying and rehydration characteristics of red kidney bean seeds were investigated. Drying experiments were carried out at four different drying air temperatures of 50°C, 60°C, 70°C, and 80°C. It was observed that drying and rehydration characteristics of bean seeds were greatly influenced by air temperatures and pretreatments. Four commonly used mathematical models were evaluated to predict the drying kinetics of bean seeds. The Weibull model described the drying behaviour of bean seeds at all temperatures better than the other models. The effective moisture diffusivities (D_eff) of bean seeds were determined using Fick's law of diffusion. The values of D_eff were between 1.25 × 10^?9 and 3.58 × 10^?9 m²/s. Activation energy was estimated by an Arrhenius-type equation and was determined as 24.62, 21.06, and 20.36 kJ/mol for citric acid, blanch, and control samples, respectively.     

The influence of pH on reaction pathways for O2 reduction on the Au(100) face

Oxygen reduction on the Au(100) face was studied by the rotating disk-ring electrode technique in solutions of anions which adsorb strongly on gold (HSO₄⁻/SO₄²⁻ and/or OH⁻) over the entire pH range. The specific adsorption of OH⁻ anions, which is a pH dependent process, is found to play the key role in determining the reaction pathways. In the absence of OH⁻ adsorption, for pHs below 6, the reduction of O₂ begins as a 2e-process. Due to the increase in local pH during O₂ reduction, the reaction pathway turns into a 4e-reduction at a certain potential depending on the pH of the solution. For pHs higher than 6, O₂ reduction begins as a 4e-process in the potential region where specifically adsorbed OH⁻ anions are present.     

碳纤维改性热塑性树脂研究进展

主要从碳纤维对材料的力学性能、耐热性、电学性能以及材料的耐磨性能等方面的影响对碳纤维在聚丙烯(PP)、聚氯乙烯(PVC)、聚碳酸酯(PC)、尼龙(PA)、聚苯硫醚(PPS)、聚醚醚酮(PEEK)等热塑性塑料改性中的应用进行了综述,并对碳纤维在热塑性树脂中的应用前景进行了展望。采用双螺杆挤出法制备碳纤维增强热的塑性高分子复合材料具有非常广阔的应用前景。     

A novel natural rubber‐graft‐cassava starch foam for oil/gasohol absorption

The objective of this work was to study a novel foam prepared from natural rubber grafted with cassava starch (NR‐graft‐CSt) with the addition of super cell (SC) as a blowing agent. The effects of the blowing agent and grafting versus non‐grafting of the starch and the natural rubber on the properties of the foam were investigated. The results show that the optimum curing time decreases with increasing SC loading as observed using a moving die rheometer. The porosity, the number of cells per unit volume and the cell size of the NR/CSt blend increase as a function of the SC loading in the foam. A more open cell structure is produced by higher loadings of SC. The greatest number of cells per unit volume is found at 2 and 6 phr SC for NR‐graft‐CSt and NR/CSt blend, respectively. The foam produced was used as an absorbent for oil. The NR‐graft‐CSt foam shows a maximum percentage oil absorption of around 7 g g^?1. The NR‐graft‐CSt foam is able to be reused as an oil absorbent for a maximum number of over 30 times. The NR‐graft‐CSt foam shows better toluene resistance than the NR/CSt blend. © 2016 Society of Chemical Industry     

C／T iO 2复合材料的制备及光催化性能的研究

采用溶胶-凝胶法制得了C/TiO2复合光催化剂,并采用X射线衍射（XRD）﹑扫描电子显微镜（ SEM ）﹑紫外光谱等方法对复合材料进行了表征。以1-萘胺-4-偶氮对苯磺酸为模型化合物评价了C/TiO2复合材料的光催化性能,考察了降解时间、初始浓度和催化剂投加量等因素对降解率的影响。研究表明,在1-萘胺-4-偶氮对苯磺酸初始浓度为2×10-5 mol/L,催化剂投加量为1．0 g/L时,光催化反应5 h后,1-萘胺-4-偶氮对苯磺酸的降解率达到85．41％。     

INTEGRAL EQUATION APPEOACH FOZ SIHULATION-OF - HEAT AND MASS TRANSFER PROCESSES

An integral equation approach was recommended for modelling and simulation of heat and mass transfer processes. It was shown that several mixing models that have been dealt with up to now dlfferently, can be unified in a single integral equation. An effective numerical method was developed for the solution of non-linear integral equation. A construction method for the source and kernel functions were lntroduced in connection with the simulation and control of heat treatlng processes taking place in tunnel kiln and heat and mass transfer processes in tunnel dryer.

We have concluded that our method is advantageous If the slmulated process 1s slgnlficantly affected by the degree of mixing and/or the kernel function can be determined by direct measurement of the streaming phases including feedback, recirculation etc.     

Hydrogen trapping models in steel

This article describes the role of hydrogen trapping in steel. Trapping increases the solubility of hydrogen and decreases the diffusivity. Traps are characterized by their nature, i.e., reversible or irreversible, saturable or unsaturable. A dislocation core is a saturable, reversible trap, while voids and crack are unsaturable, reversible traps. A trap model based on saturable, reversible traps is developed, which is slightly different from the trap model of McNabb and Foster. In equilibrium, the trap model corresponds to Oriani’s trap model. Kumnick and Johnson found experimentally that the trap density increases as the plastic strain increases. Using their trap data, it is shown that equilibrium between hydrogen in lattice sites and trap sites can be assumed when strain rates are used as in standard tensile tests.     

Testing Address Decoder Faults in Two-Port Memories: Fault Models, Tests, Consequences of Port Restrictions, and Test Strategy

A two-port memory contains two duplicated sets of address decoders, which operate independently. Testing such memories requires the use of single-port tests as well as special two-port tests; the test strategy determines which tests have to be used. Many two-port memories have ports which are read-only or write-only; this impacts the possible tests for single-port and two-port memories, as well as the test strategy. In this paper the effects of interference and shorts between the address decoders of the two ports on the fault modeling are investigated. Fault models and their tests are introduced. In addition, the consequences of the port restrictions (read-only or write-only ports) on the fault models and tests are discussed, together with the test strategy.