Ionic liquid recovery alternatives in ionic liquid‐based three‐phase partitioning (ILTPP)

Ionic liquid‐based three‐phase partitioning (ILTPP) is a promising technique to recover high‐added value proteins at the liquid–liquid interface. Its economic and environmental performance highly depends on the net ionic liquid consumption. Alternatives to maximize the fraction of ionic liquid that can be recycled are studied. It is demonstrated that the addition of extra salt, previously proposed in literature, has a very limited effect on ionic liquid recovery for relatively high protein concentrations in the feed stream, and that it may even lead to an increase of the ionic liquid losses under certain conditions. However, small additions of salt are shown to be effective and profitable from an economic point of view. Vacuum evaporation is shown to allow for the complete ionic liquid and salt recovery, reinforcing the sustainability and viability of ILTPP processes. © 2014 American Institute of Chemical Engineers AIChE J, 60: 3577–3586, 2014     

Continuous electrochemical reduction of carbon dioxide into formate using a tin cathode: Comparison with lead cathode

Electrochemical reduction has been pointed out as a promising method for CO₂ valorisation into useful chemicals. This paper studies the influence of key variables on the performance of an experimental system for continuous electro-reduction of CO₂ to formate, when a tin plate is used as working electrode. Particular emphasis is placed on comparing the performance of Sn and Pb as cathodes. As was previously found with Pb, the influence of current density (“j”) using Sn was particularly noteworthy, and when j was raised up to a limit value of 8.5 mA cm⁻², important increases of the rate of formate production were observed at the expense of lowering the Faradaic efficiency. However, unlike what was found with Pb, the performance using Sn improved when the electrolyte flow rate/electrode area ratio was increased within the range studied (0.57–2.3 mL min⁻¹ cm⁻²). In this way, the use of Sn as cathode allowed achieving rates of formate production that were 25% higher than the maximum rates obtained with Pb, together with Faradaic efficiencies close to 70%, which were 15 points higher than those with Pb. These results reinforce the interest in Sn as electrode material in the electro-reduction of CO₂ to formate.     

Sirtuin 7 Deficiency Reduces Inflammation and Tubular Damage Induced by an Episode of Acute Kidney Injury

Acute kidney injury (AKI) is a public health problem worldwide. Sirtuins are a family of seven NAD+-dependent deacylases, Overexpression of Sirtuin 1, 3, and 5 protect against AKI. However, the role of Sirtuin 7 (Sirt7) in AKI is not known. Here, we analyzed how Sirt7 deficient mice (KO-Sirt7) were affected by AKI. As expected, wild-type and Sirt7 heterozygotes mice that underwent renal ischemia/reperfusion (IR) exhibited the characteristic hallmarks of AKI: renal dysfunction, tubular damage, albuminuria, increased oxidative stress, and renal inflammation. In contrast, the KO-Sirt7+IR mice were protected from AKI, exhibiting lesser albuminuria and reduction in urinary biomarkers of tubular damage, despite similar renal dysfunction. The renoprotection in the Sirt7-KO+IR group was associated with reduced kidney weight, minor expression of inflammatory cytokines and less renal infiltration of inflammatory cells. This anti-inflammatory effect was related to diminished p65 expression and in its active phosphorylation, as well as by a reduction in p65 nuclear translocation. Sirt7 deficient mice are protected from AKI, suggesting that this histone deacetylase promotes tubular damage and renal inflammation. Therefore, our findings indicate that Sirt7 inhibitors may be an attractive therapeutic target to reduce NFκB signaling.     

“Arbequina” Olive Oil Composition Is Affected by the Application of Regulated Deficit Irrigation during Pit Hardening Stage

Three new regulated deficit irrigation (RDI) treatments were applied to “Arbequina” olive orchards during pit hardening. Oil quality was determined by measuring analytical parameters for olive oil grading, antioxidant activity, total phenol content, fatty acid profile, volatile compounds profile, and sensory analysis. Oils from RDI were classified as “extra virgin olive oil” and their quality was improved due to their higher antioxidant potential (ABTS⁺ [increased ~75%] and DPPH^˙ [increased ~25%] assays) and phenols (increased ~53%) than control. Concentration of total volatile compounds decreased (~27%) but RDI olive oils showed a more balanced profile (alcohols, aldehydes, and esters). Monounsaturated fatty acid content increased (~5%) and atherogenic and thrombogenic indexes decreased (~8.5%) in RDI olive oil. Regarding sensory analysis, RDI provided more balanced oils with higher fruit aroma than control. Other benefits of RDI olive oil, when compared with oil from full irrigated orchards are reduced use of water and improved functional and sensory quality.     

Magnetic nanocellulose hybrid nanoparticles and ionic liquid for extraction of neonicotinoid insecticides from milk samples prior to determination by liquid chromatography-mass spectrometry

A simple and rapid microextraction procedure is reported on the use of ionic liquid in combination with magnetic nanocellulose hybrid nanoparticles. The procedure is ultrasound-assisted and applicable to selective preconcentration of neonicotinoid insecticides from milk samples, prior to being analysed by liquid chromatography-mass spectrometry. The extraction procedure uses small volume of organic solvents (<1 mL), and there is no need for centrifugation. In the experimental approach the ionic liquid was quickly disrupted by an ultrasonic probe and dispersed in milk samples in a cloudy form. At this stage, neonicotinoid insecticides were extracted into the fine droplets of ionic liquid. Then small amounts of magnetic nanocellulose hybrid nanoparticles were dispersed into the sample solutions to adsorb the ionic liquid containing the analytes and phase separation was completed. The ionic liquid allowed the microextraction of the analytes and a small volume of acetonitrile was used for elution. Magnetic nanocellulose favoured the adsorption of the ionic liquid with the analytes and improved the final recovery with respect to the use of simple magnetic nanoparticles as a sorbent material. Under the optimum conditions, decision capabilities were achieved in the 0.02–0.06 mg kg^?1 range, with recoveries between 91.0% and 109.5%.     

Sequential processing of quantitative phase images for the study of cell behaviour in real‐time digital holographic microscopy

Transmitted light holographic microscopy is particularly used for quantitative phase imaging of transparent microscopic objects such as living cells. The study of the cell is based on extraction of the dynamic data on cell behaviour from the time‐lapse sequence of the phase images. However, the phase images are affected by the phase aberrations that make the analysis particularly difficult. This is because the phase deformation is prone to change during long‐term experiments. Here, we present a novel algorithm for sequential processing of living cells phase images in a time‐lapse sequence. The algorithm compensates for the deformation of a phase image using weighted least‐squares surface fitting. Moreover, it identifies and segments the individual cells in the phase image. All these procedures are performed automatically and applied immediately after obtaining every single phase image. This property of the algorithm is important for real‐time cell quantitative phase imaging and instantaneous control of the course of the experiment by playback of the recorded sequence up to actual time. Such operator's intervention is a forerunner of process automation derived from image analysis. The efficiency of the propounded algorithm is demonstrated on images of rat fibrosarcoma cells using an off‐axis holographic microscope.     

Continuous-Flow UV Liquid Food Pasteurization: Engineering Aspects

Ultraviolet (UV)-C treatments are a promising technology for liquid food pasteurization as an alternative to heat treatments. However, the design of efficient UV reactors to reduce pertinent microorganisms and comply with current food safety goals is still an engineering challenge due to the low penetration depth of UV light in liquid foods with high UV absorbance and suspended particles, and the variations in the residence time of the product in the UV reactors. This review focuses on physical aspects of UV radiation related to the essential product and processing parameters for the design of UV reactors. The UV equipment available for liquid food processing is described and the main drawbacks and advantages are discussed.     

A DNA Methyltransferase Modulator Inspired by Peyssonenyne Natural Product Structures

A novel epigenetic modulator that displays a DNMT1 inhibition and DNMT3A activation profile was characterized (compound 8 ). This compound is a derivative of palmitic acid that incorporates the putative reactive functional group (diynone) of the peyssonenyne natural products. Other analogues containing the diynone or an acetoxyenediyne did not show the same biological profile. In U937 human leukemia cells, diynone 8 induced cell differentiation and apoptosis, which correlated with the expression of Fas protein. Very surprisingly, diynone 8 was toxic to normal human fibroblasts (BJ) and mouse embryo fibroblasts (MEF), but not to immortalized human fibroblasts (BJEL); this unique effect was not observed with the classical DNMT inhibitor 5‐azacytidine. Therefore, compound 8 interferes in a very specific manner with signaling pathways, the activities of which differ between normal and immortalized cell types. This toxicity is reminiscent of the effects of Dnmt1 ablation on mouse fibroblasts. In fact, some of the genes deregulated by the loss of Dnmt1 are similarly deregulated by 8 , but not by the DNMT inhibitor SGI‐1027.     

Effects of Catalyst Activity Profiles on the Operating Conditions of an Industrial Polymerization Reactor

The aim of this paper is to analyze how different catalyst activity profiles influence the operating strategies of industrial polymerization reactors. Since the catalyst activity profiles may change considerably in the range of the residence-time of the reactor, the properties of the produced polymer powder are the averages of ones produced by catalyst particles with various activities. Hence, the residence-time distribution of the polymer phase has an effect on the product properties as well. Based on these phenomena a new method is proposed to transform information from laboratory reactor into a form which can be used to estimate the operation condition of industrial reactor. The whole approach is demonstrated in case of the production of high-density polyethylene.