The influence of NaCl and CO2 on the atmospheric corrosion of magnesium alloy AZ91

The influence of NaCl and CO₂ on the atmospheric corrosion of magnesium alloy AZ91 is studied in the laboratory. Samples were exposed under carefully controlled air and flow conditions; the relative humidity was 95%, the temperature was 22.0°C and the concentration of CO₂ was < 1 ppm or 350 ppm. Different amounts of sodium chloride (0–70 μg/cm²) were added before exposure. The corrosion products were analyzed by gravimetry, ion chromatography, X‐ray diffraction and scanning electron microscopy. Mass gain and metal loss results are reported. The combination of high humidity and NaCl is very corrosive towards AZ91. However, the NaCl‐induced corrosion is inhibited by ambient concentrations of CO₂. Exposure in the absence of CO₂ gives rise to heavy pitting, with brucite, Mg(OH)₂, being the dominant corrosion product. In the presence of CO₂ a layer of hydrated magnesium hydroxy carbonate, Mg₅(CO₃)₄(OH)₂ · 5 H₂O forms. A tentative corrosion mechanism is presented that explains the behavior in the two environments.     

Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapour at 600 °C

This article focuses on the detailed microstructural investigation of the oxide scale formed on a 304 steel in the presence of oxygen and water vapour (40%) at 600 °C. The work has been carried out using a combination of microanalytical techniques including FIB, TEM, EDX and electron diffraction. The local breakdown of the initially protective oxide scale and the growth of island/crater oxide morphology are described. Special consideration is given to the influence of the microstructure of the steel and the oxide scale on the breakdown behaviour.     

Lateral buckling of beams analysed as elastically supported columns subject to a varying axial force

The stability problem for an elasticallu supported column subject to a varying axial force has been solved by means of a general numerical procedure based on Galerkin's method. Apart from the intrinsic value of the solution itself, its possible value modelling some complex stability problems in the area of restrained lateral-torsional stability problems is demonstrated and specific numerical solutions are applied to the case of lateral buckling of the free flange of a composite girder. The results obtained are discussed and suggestions for additional investigations are presented.     

External and internal calibration of the MHC class I-specific receptor Ly49A on murine natural killer cells

Expression of the H-2Dd-specific inhibitory receptor Ly49A on murine NK cells is subject to MHC class I-dependent modulation in vivo. As a result, NK cells in H-2Dd-transgenic mice express low cell surface levels of Ly49A, whereas NK cells from nontransgenic C57BL/6 (B6) mice express high levels. The purpose of this study was to assess the role of MHC class I molecules on the NK cell itself vs those on surrounding cells in this calibration and to test whether the Ly49A levels are subject to regulation in mature NK cells also. Analysis of transgenic mice with mosaic expression of an H-2Dd/Ld transgene showed that MHC class I molecules on surrounding cells (external ligands) and on the NK cell itself (internal ligands) played distinct roles in the determination of Ly49A levels. External ligands were involved in down-regulation of Ly49A levels in vivo, whereas internal ligands kept the down-regulated levels of Ly49A low upon NK cell activation in vitro. Furthermore, in an experimental system based on adoptive transfer of spleen cells, receptor down-regulation of Ly49A occurred as a rapid adaptation process in mature NK cells after interaction with the H-2Dd ligand in vivo. This suggests that Ly49 levels are not fixed but can be changed in mature NK cells when they are exposed to a changed MHC class I environment.     

Treatment with the oral growth hormone secretagogue MK-677 increases markers of bone formation and bone resorption in obese young males

The effect of 2 months of treatment with the oral growth hormone (GH) secretagogue MK-677 on markers of bone metabolism was determined in healthy obese male subjects. This was a randomized, double-blind, parallel, placebo-controlled study. Twenty-four healthy obese males, 19-49 years of age, with body mass index > 30 kg/m2 were treated with MK-677 (25 mg/day; n = 12) or placebo (n = 12) for 8 weeks. MK-677 increased markers of bone formation; a 23% increase in the carboxy-terminal propeptide of type I procollagen levels and a 28% increase in procollagen III peptide levels were seen with as little as 2 weeks of MK-677 treatment (p < 0.01 and p = 0.001 vs. placebo, respectively) while a 15% increase in serum levels of osteocalcin was not detected until 8 weeks of treatment (p < 0.01 vs. placebo). Markers of bone resorption were induced within 2 weeks of treatment with MK-677; serum levels of the carboxy-terminal cross-linked telopeptide of type I collagen were increased 26% at 8 weeks (p = 0.001 vs. placebo), and urine hydroxyproline/creatinine and calcium/creatinine ratios at 8 weeks were increased by 23% (p < 0.05 vs. placebo) and 46% (p < 0.05 vs placebo), respectively, MK-677 increased serum insulin-like growth factor binding protein-5 (IGFBP-5) by 43-44% after 2-8 weeks of treatment (p < 0.01 vs. placebo). Serum IGFBP-4 was increased by 25% after 2 weeks of treatment (p < 0.001 vs. placebo) but no significant change from baseline was observed after 8 weeks of treatment. Plasma interleukin-6 was not significantly changed by active treatment. In conclusion, short-term treatment of healthy obese male volunteers with the GH secretagogue MK-677 increases markers of both bone resorption and formation. Large increases in serum levels of IGF-1 and IGFBP-5 and a transient increase in serum IGFBP-4 were found. Future long-term studies are needed to investigate if prolonged treatment with MK-677 increases bone mass.     

Classical behavior of non-superfluid4He

We correct for the effect of temperature induced frequency shifts on the observed dynamic structure factor S(q,) and find that the intrinsic behavior for non-superfluid⁴He is remarkably similar to that for other noble-gas fluids.     

Effect of chromium aging on the structural and thermal properties of chromium polyacrylate

The effects of aging time of Cr(III) solutions on the structural, thermal, magnetic, and morphological properties of chromium polyacrylate complexes were studied. Chromium retention was found to increase with longer aging periods. IR spectra revealed the formation of polychelate structures with noticeable changes on aging. The interaction of multivalent, polynuclear Cr(III) species with the polymer backbone resulted in a decrease in thermal stability for the complexes prepared from olated chromium solutions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 490–493, 2005     

The content and composition of sterols and sterol esters in low erucic acid rapeseed (Brassica napus)

The low temperature crystallization technique for the enrichment of “minor” components, such as sterols and sterol esters, from vegetable oils was applied to low erucic acid rapeseed oils. The recovery of free sterols and sterol esters was estimated by use of¹⁴C-cholesterol and¹⁴C-cholesterol oleate. 80% of the free sterols and 45% of the sterol esters were recovered in the liquid fraction, while in two studies total recoveries were 95% and 99%, respectively. This technique showed some selectivity toward the sterol bound fatty acids when compared to direct preparative thin layer chromatography (TLC) of the crude oil. Gas liquid chromatography (GLC) analysis of the free and esterified sterols as TMS-derivatives showed very little selectivity in the enrichment procedure. The fatty acid patterns of the sterol esters demonstrated, however, a preference in the liquid fraction for those sterol esters which have a high linoleic and linolenic acid content. The content of free sterols was 0.3–0.4% and that of sterol esters 0.7–1.2% of the rapeseed oils in both winter and summer types of low erucic acid rapeseed (Brassica napus) when the lipid classes were isolated by direct preparative TLC of the oils. The free sterols in the seven cultivars or breeding lines analyzed were composed of 44–55% sitosterol, 27–36% campesterol, 17–21% brassicasterol, and a trace of cholesterol. The esterified sterols were 47–57% sitosterol, 36–44% campesterol, 6–9% brassicasterol, and traces of cholesterol and Δ5-avenasterol. The fatty acid patterns of these esters were characterized by ca. 30% oleic acid and ca. 50% linoleic acid, whereas these acids constitute 60% and 20%, respectively, of the total fatty acids in the oil. Little or no variation in sterol and sterol ester patterns with locality within Sweden was observed for the one cultivar of summer rapeseed investigated by the low temperature crystallization technique.