The Organization of the Quorum Sensing luxI/R Family Genes in Burkholderia

Members of the Burkholderia genus of Proteobacteria are capable of living freely in the environment and can also colonize human, animal and plant hosts. Certain members are considered to be clinically important from both medical and veterinary perspectives and furthermore may be important modulators of the rhizosphere. Quorum sensing via N-acyl homoserine lactone signals (AHL QS) is present in almost all Burkholderia species and is thought to play important roles in lifestyle changes such as colonization and niche invasion. Here we present a census of AHL QS genes retrieved from public databases and indicate that the local arrangement (topology) of QS genes, their location within chromosomes and their gene neighborhoods show characteristic patterns that differ between the known Burkholderia clades. In sequence phylogenies, AHL QS genes seem to cluster according to the local gene topology rather than according to the species, which suggests that the basic topology types were present prior to the appearance of current Burkholderia species. The data are available at http://net.icgeb.org/burkholderia/.     

Structure,microstructure and electrical properties of Cu2+ doped (K,Na,Li)(Nb,Ta,Sb)O3 piezoelectric ceramics

This work studies the effects of copper doping on the properties of the (K_0.44Na_0.52Li_0.04)(Nb_0.86Ta_0.10Sb_0.04)O₃ piezoelectric ceramic material. Cu²⁺ incorporation into the perovskite structure produces a transformation of the crystalline lattice from tetragonal to orthorhombic symmetry together with an increase of the secondary phase. The grain size of the ceramic samples is increased due to the formation of a liquid phase during sintering, which increases with the Cu²⁺ content. EDS analysis reveals that the secondary-phase regions present a Cu and Nb-rich composition, indicating that the Cu-excess accommodates through the formation of this secondary phase. Cu-doping induces a rapid increase of the orthorhombic–tetragonal phase transition temperature, while the tetragonal–cubic phase transition temperature is decreased, the latter becoming more diffuse with the increase of Cu content. The piezoelectric properties of the material are reduced with the copper concentration, whereas the mechanical quality factor increases by a factor of nearly four.     

Synthesis,calcination and characterization of Nanosized ceria powders by self-propagating room temperature method

Nanometric ceria powders with fluorite-type structure were obtained by applying self-propagating room temperature method. The obtained powders were subsequently thermally treated (calcined) at different temperatures for different times. Powder properties such as specific surface area, crystallite size, particle size and lattice parameter have been studied. Roentgen diffraction analysis (XRD), BET and Raman scattering measurements were used to characterize the as-obtained (uncalcined) powder as well as powders calcined at different temperatures.It was found that the average diameter of the as-obtained crystallites is in the range of 3–5 nm whereas the specific surface area is about 70 m²/g. The subsequent, 15 min long, calcination of as-obtained powder at different temperatures gradually increased crystallite size up to ～60 nm and reduced specific surface down to 6 m²/g. Raman spectra of synthesized CeO_2?y depicts a strong red shift of active triply degenerate F_2 g mode as well as additional peak at 600 cm^?1. The frequency of F_2 g mode increased while its line width decreased with an increase in calcination temperature. Such a behavior is considered to be the result of particle size increase and agglomeration during the calcination. After the heat treatment at 800 °C crystallite size reached value larger than 50 nm. Second order Raman mode, which originates from intrinsic oxygen vacancies, disappeared after calcination.     

Preparation of dehydroxylated and delaminated talc: Meta-talc

The roentgen-amorphous delaminated and dehydroxylated phase was prepared applying intensive milling procedure and subsequent thermal treatment of talc. Due to the similarity in properties and in thermal behavior of this material with roentgen-amorphous delaminated and dehydroxylated kaolinite phase, i.e. meta-kaolinite, the name meta-talc was suggested for this material. The properties and the behavior during thermal treatment were investigated using thermal analysis, x-ray diffraction analysis, infrared spectroscopy and scanning electron microscopy. The suggested procedure changes the activation energy of dehydroxylation, the behavior during thermal treatment and the phase composition of the product. The kinetics and thermodynamics of the thermal transition were evaluated using Kissinger equation and Eyering law.     

Sintering of porous alumina obtained by biotemplate fibers for low thermal conductivity applications

In this research report, a sintering process of porous ceramic materials based on Al₂O₃ was employed using a method where a cation precursor solution is embedded in an organic fibrous cotton matrix. For porous green bodies, the precursor solution and cotton were annealed at temperatures in the range of 100–1600 °C using scanning electron microscopy (SEM) and thermogravimetric (TG) analysis to obtain a porous body formation and disposal process containing organic fibers and precursor solution. In a structure consisting of open pores and interconnected nanometric grains, despite the low porosity of around 40% (calculated geometrically), nitrogen physisorption determined a specific surface area of 14 m²/g, which shows much sintering of porous bodies. Energy dispersive X-ray (EDX) and X-ray diffraction (XRD) analytical methods revealed a predominant amount of α-Al₂O₃ in the sintered samples. Thermal properties of the sintered Al₂O₃ fibers were obtained by using the Laser Flash which resulted in the lower thermal conductivity obtained by α-Al₂O₃ and therefore improved its potential use as an insulating material.     

Nanoindentation of WC–Co hardmetals

WC–Co cemented carbide has been investigated using instrumented indentation with maximum applied loads from 0.1 to 10 mN. The hardness and indentation modulus of individual phases and the influence of crystallographic orientation of WC on the hardness and indentation modulus have been studied. The hardness of the Co binder was approximately 10 GPa and that of WC grains up to 50 GPa with relatively large scatter under the indentation load of 1 mN. Investigation of the role of crystallographic orientation of WC grains on hardness at 10 mN load revealed average values of H_ITbasal = 40.4 GPa (E_ITbasal = 674 GPa) and H_ITprismatic = 32.8 GPa (E_Itprismatic = 542 GPa), respectively. The scatter in the measured values at low indentation loads is caused by the effects of surface and sub-surface characteristics (residual stress, damaged region) and at higher loads by “mix-phase” volume below the indenter.     

Strong pinning effect of alumina/nanodiamond composites obtained by pulsed electric current sintering

A small fraction (5 vol.%) of detonation nanodiamonds, or DND, acts as a remarkably effective boundary pinning agent in alumina throughout a wide sintering temperature range (from 1200 up to 1700 °C). This is the first time that such a strong grain growth inhibitory effect is observed for any of the alumina based composites of similar characteristics reported in the literature. These nanocomposites were consolidated by pulsed electric current sintering (PECS) and present bending strength (550 MPa) and toughness (5.2 MPa m^1/2) values significantly higher than the ones corresponding to alumina compacts obtained under the same sintering conditions.     

Maximum likelihood estimation for the three-parameter Weibull cdf of strength in presence of concurrent flaw populations

For a correct strength characterization of brittle materials, not only the maximum stress at fracture, but also the geometry of the specimens has to be considered thus taking into account the variable stress state and the size effect. Additionally, fracture may occur due to different fracture modes, as for example surface or edge defects. The authors propose a maximum likelihood estimator to obtain the cumulative distribution functions of strength for surface and edge flaw populations separately, both being three-parameter Weibull cdfs referred to an elemental surface area or elemental edge length, respectively. The method has been applied to simulated 3-point bending test data. The estimated Weibull parameters have been used to compute the cdfs of strength for specimens with different size, providing also the confidence bounds calculated by means of the bootstrap method. Finally, fracture data of 4-point bending tests on silicon carbide have been evaluated with the proposed method.     

The influence of structure order on the kinetics of dehydroxylation of kaolinite

The structural order of kaolinite is an important factor that shows a substantial effect on the processes which take place during the thermal treatment of kaolin. The influence of structural order on the dehydroxylation process was investigated by simultaneous thermogravimetry and differential thermal analysis (TG-DTA). The thermal analysis was performed on the samples with gradually decreasing structural order prepared by milling procedure. The apparent activation energy of dehydroxylation process decreases with decreasing structural order according to the exponential function. The extrapolation of experimental data leads to the estimation of apparent activation energy of 76.6 kJ mol^?1 and of frequency factor of 0.12 × 10⁴ s^?1 related to completely disordered form of kaolinite, while the ordered form shows the apparent activation energy of 216.17 kJ mol^?1 and the frequency factor of 9.26 × 10⁴ s^?1. The relationships between features such as the infrared pattern of treated material, the degree of structural order and the apparent activation energy were established.     

NbO/Nb2O5 core–shells by thermal oxidation

Niobium oxides have been reported as an alternative to tantalum, and its oxide, for the production of capacitors, but these materials still require a further and exhaustive study. Understanding the dynamics of the oxidation process from NbO to Nb₂O₅ is essential to explain and control the properties of a niobium oxide based capacitors. In situ XRD analysis of NbO powders was performed from 100 to 1100 °C, which showed a temperature range where only amorphous phase is present. The capacitor anodes, formed from the same type of NbO powders, were then heat-treated in air from room-temperature (RT) to 550 °C and recorded with a video camera to see the colour shift. The presence of core–shell structures and the increase of the shell thickness/amount with temperature are visible in SEM. Finally, in situ spectroscopy studies were performed, in order to observe the interference spectra which are responsible for the observed colours.