钛在氯碱工业中的发展

介绍了金属钛在氯碱工业发展的几次较大变革中所起的重要作用，并对金属钛在隔膜法和离子膜法制碱中的应用进行了综述，得出了钛和氯碱工业互相推动共同发展的结论。     

台阶爆破根底成因及减少根底的技术措施

本文针对前排孔位置残留根底的原因进行了分析。并提出了降低后排孔孔药柱顶、底部标高，采用斜线起爆技术等减少根底的技术措施。     

钻头比水功率影响机械钻速的实验研究

本文通过现场试验，并对实验结果进行了回归分析，得出试验地区钻头比水功率与机械钻速的关系方程；并证实水力能量不仅具有清岩、携岩作用，而且具有辅助破岩作用。认为：钻头比水功率对机械钻速的影响程度受比水功率的大小所左右。     

采用双相码高速传输水下声数据的一种方法

本文说明了利用单芯同轴电缆高速传输水下声数据的必要性,并给出了一种采用双相码的水下声数据基带传输方法,实验结果表明了该方案的优越性。     

“火”爆债务纠纷 铸成大祸坐牢

处理债务纠纷，本应清醒理智，通过正当的法律途径来解决，而犯罪嫌疑人朱某却走向极端。日前，涉嫌纵火的朱某已被许昌市魏都公安分局依法刑事拘留。     

SERT结晶器液位控制系统

介绍一种梅山冶金公司板坯连同上应用的新型的结晶器液位控制系统，它由浮式式液位检测装置，ＲＳＥ１０００控制器和电动塞棒执行机构所组成，由法国ＳＥＲＴ公司成套制造。     

Mensuration and simulation of mold filling process in semi-solid die-cast of aluminum alloy

To understand the flow trace of semi-solid slurry in mold cavity, some thermocouples were inserted in mold cavity, and the reaction timing of thermocouples showed the arrival of fluid. The filling time and rate were estimated by comparison between the experiment and calculation. The introduction of computer simulation technique based on ADSTEFAN was to predict injectionforming process and to prevent defects during trial manufacture of various parts. By comparing the formed appearance of parts in experiment and in simulation, and observing the relationship between internal defects inspected by X-ray or microscope and the flow field obtained in simulation, it was indicated that both have quite good agreement in simulation and experiment. Right predictions for cast defects resulted from mold filling can be carried out and proper direction was also proposed. The realization of numerical visualization for filling process during semi-solid die-cast process will play an important role in optimizing technology plan.     

黄铜中纳米级微裂纹的形核与钝化

黄铜薄膜试样在透射电镜中原位拉伸观察表明，在平衡条件下加载裂发出的位错纯化成无位错区，它是一个应变很高的异常弹性区。当缺口足够锐，外加载荷足够大时，这个非线弹性区中的应力有可能达到原子键合力，从而使纳米级微裂纹在无位错区中不连续形核，或从钝化的原裂纹顶端形核。这个微裂纹一昊形核，即使保持恒位移，也将钝化成空洞或缺口。