Temperature and Frequency Dependence of the Ultrasound Velocity in Neutron-Irradiated Quartz Crystals Above 5 K

Neutron-irradiated quartz crystal is one of the interesting materials for the study of the glassy dynamics. The temperature and frequency dependence of the sound velocity in amorphous materials at temperatures above the low-temperature maximum is not well understood. In this paper we present the results of our measurements of the variation of the ultrasound velocity (270 – 650 MHz) in neutron-irradiated quartz crystals with different irradiation doses in temperature range 5 - 35 K. We have found that the temperature dependence of the ultrasound velocity is linear in the sample with a dose < 10 ¹⁹ n/cm² and is sublinear in samples with a dose > 10 ¹⁹ n/cm² . We discuss our results in the framework of the different theoretical approaches. PACS numbers: 61.43. j, 62.65.+k, 63.     

Point Contact Spectroscopy and Temperature Dependence of Resistivity of Metallic Sodium Tungsten Bronzes - Role of Optical Phonons

In this paper we report the results of electrical resistivity (1.5≤ T ≤ 300K) and point contact spectroscopy (PCS) measurements on single crystals of metallic sodium tungsten bronze with varying sodium content. We have shown that the electron-phonon coupling function as measured through PCS can explain quantitatively the large temperature dependence of resistivity ρ seen in these materials over the entire temperature range. The electron-phonon coupling function shows predominately large peaks for phonon frequency range of 30 meV ≤ ω ≤ 100 meV which match well with the calculated optical phonons for WO₆ octahedron. The integrated electron-phonon coupling constant λ from this data is ≈ 0.25-0.45, depending on the Na content. PACS numbers: 72.15.-v, 72.80.Ga     

Influence of the shape of fiber cross section on fabric surface characteristics

Fiber cross sections for use in textiles and composites are becoming more and more complex. Shape impacts fiber or filaments properties and therefore the yarn and fabric characteristics. This paper presents the influence of the fiber cross section on the fabric surface characteristics. The material used was polyester staple fibers, of four different shapes: round, scalloped oval, cruciform and hexachannel. All fibers had the same cut length with different fineness. Yarns obtained from these fibers had nominally the same yarn count, torsion value and structure. Plain jersey fabrics were knitted from each of the yarns under identical conditions and then relaxed prior to testing. Friction behavior was evaluated and a roughness-friction criterion developed. An indirect measurement of the real area of contact was obtained in order to provide roughness and friction properties. The influence of fiber cross section on yarn bending rigidity and on the state of the knitted fabric surface was characterized.     

On the stabilizing behavior of zirconia: A Combined experimental and theoretical study

Reactive zirconia powder was synthesized by the complexation of zirconium metal from zirconium hydroxide using a solution of 8-hydroxiquinoline. The kinetics of zirconia crystallization was followed by X-ray diffraction, scanning electron microscopy and surface area measured by the nitrogen adsorption/desorption technique. The results indicated that zirconia with a surface area as high as 100 m²/g can be obtained by this method after calcination at 500°C. Zirconia presents three polymorphic phases (monoclinic, tetragonal and cubic), which are reversibly interconversible. The cluster model Zr₄O₈ and Zr₄O₇ ⁺² was used for a theoretical study of the stabilization process. The ab initio RHF method was employed with the Gaussian94 program and the total energies and the energy gap of the different phases were calculated and compared with the experimental energy gap. The theoretical results show good reproducibility of the energy gap for zirconia.     

HRTEM observation of the monoclinic-to-tetragonal m-t) phase transition in nanocrystalline ZrO2

The orientation relations m(100) || t(001), m[001] || t[110]; m(011) || t(100), m[100] || t[001]; m(100) || t(110), m[001] || t[001]; m(013) || t(116), m[001] || t[001] (indices for the primitive tetragonal cell) have been found between the tetragonal (t) and monoclinic (m) domains during the electron irradiation-induced m-t phase transition observed in-situ with HREM within isolated zirconia nanoparticles. Geometric models of the m-t interfaces are proposed.     

Potential for integration of electrophoretic deposition into electronic device manufacture; demonstrations using silver/palladium

A silver palladium (Ag/Pd) alloy powder is used as an example material to illustrate potential applications of electrophoretic deposition (EPD) in electronics manufacturing, in particular the forming of multilayer devices. The dispersion and deposition of the Ag/Pd powder in acetic acid is characterized. It is found that deposition can be explained by the direct action of electrostatic force on individual particles. Depositions of this Ag/Pd powder are then used to demonstrate: forming of a continuous layer on a rigid substrate; forming of continuous layers in laminated and sintered BaTiO₃ multilayers; and incorporation of patterned depositions into a multilayer by either overcasting the patterned deposition with a particulate slip to form a multicomponent tape, or direct lamination of the patterned deposition to a low temperature co-fired ceramic (LTCC) tape. It is shown that electrically conducting layers can be formed at an average thickness of only two times the diameter of the starting powder. Continuous conductor lines thirty times the average diameter of the starting powder were formed.