Effects of solid retention time on the performance of submerged anoxic/oxic membrane bioreactor.

In this study, four similar bench-scale submerged Anoxic/Oxic Membrane Bioreactors (MBR) were used simultaneously to investigate the effects of solids retention time (SRT) on organic and nitrogen removal in MBR for treating domestic wastewater. COD removal efficiencies in all reactors were consistently above 94% under steady state conditions. Complete conversion of NH(4+)-N to NO(3-)-N was readily achieved over a feed NH(4+)-N concentration range of 30 to 50 mg/L. It was also observed that SRT did not significantly affect the nitrification in the MBR systems investigated. The average denitrification efficiencies for the 3, 5, 10 and 20 days SRT operations were 43.9, 32.6, 47.5 and 66.5%, respectively. In general, the average effluent nitrogen concentrations, which were mainly nitrate, were about 22.2, 27.6, 21.7 and 13.9 mg/L for the 3, 5, 10 and 20 days SRT systems, respectively. The rate of membrane fouling at 3 days SRT operation was more rapid than that observed at 5 days SRT. No fouling was noted in the 10 days and 20 days SRT systems during the entire period of study.     

Microbial conversion of selected azo dyes and their breakdown products.

Four selected azo dyes (acid orange 6, acid orange 7, methyl orange and methyl red) were completely decolourised in the presence of anaerobic granular sludge, while only methyl red was degraded in aerobic conditions using a conventional activated sludge. Additional experiments with culture broth devoid of cells showed that anaerobic decolourisation of azo dyes was performed by extracellular reducing agents produced by anaerobic bacteria. This was further confirmed by abiotic experiments with sulphide and NADH. The presence of redox mediators such as riboflavin led to dramatic acceleration of the anaerobic biodecolourisation process. The azo dye reduction products were found to be sulphanilic acid and 4-aminoresorcinol for acid orange 6; sulphanilic acid and 1-amino-2-naphthol for acid orange 7; N,N-dimethyl-1,4-phenylenediamine and sulphanilic acid for methyl orange; and N,N-dimethyl-1,4-phenylenediamine and anthranilic acid for methyl red. Anaerobic toxicity assays showed that the azo dyes were more toxic than their breakdown products (aromatic amines), except 1-amino-2-naphthol. In the presence of activated sludge, only anthranilic acid was completely mineralised while sulphanilic acid was persistent. 4-aminoresorcinol, 1-amino-2-naphthol and N,N-dimethyl-1,4-phenylenediamine underwent autooxidation in aerobic conditions yielding coloured polymeric products. On the contrary, in the presence of granular methanogenic sludge, 4-aminoresorcinol, 1-amino-2-naphthol and anthranilic acid were quantitatively methanised, sulphanilic acid was partially (70%) mineralised while N,N-dimethyl-1,4-phenylenediamine was only demethylated producing 1,4-phenylenediamine as an end product.     

The Grey-Rankin bound for nonbinary codes

The Grey-Rankin bound for nonbinary codes is obtained. Examples of codes meeting this bound are given. Original Russian Text Ş L.A. Bassalygo, S.M. Dodunekov, V.A. Zinoviev, T. Helleseth, 2006, published in Problemy Peredachi Informatsii, 2006, Vol. 42, No. 3, pp. 37–44. Supported in part by the Russian Foundation for Basic Research, project no. 06-01-00226.     

Safety assessment of liquid radioactive wastes buried for a long time in deep repositories

The concepts of specific and absolute toxicity permit distinguishing in radioactive wastes belonging to different categories the particular components that present the greatest ecological danger at different stages of their disposal in repositories. It is shown that transuranium elements determine the toxicity parameter of high-and medium-level wastes only 350–400 years after initial disposal. At the present stage of operation of deep repositories, the behavior of the long-lived fission products of ⁹⁰Sr and ¹³⁷Cs is most important. For low-level wastes, the chemical and not the radioactive component is most dangerous. __________ Translated from Atomnaya énergiya,Vol. 100, No. 2, pp. 86–92, February, 2006.     

Distribution of investments in the stock market, information types, and algorithmic complexity

For a simplest mathematical model of a stock market, the problem of optimal distribution of investments among different securities (stocks, bonds, etc.) is considered. Our results, which are obtained in terms of algorithmic complexity, allow to discuss heuristically the properties of sufficiently complex security portfolios in the conditions of daily changing return rates. All considerations are given in the combinatorial framework and do not use any probabilistic models.     

Principles of reference-aided decision making

A unified approach to decision making with extremal many-criteria models, expert estimates, and voting is developed on the basis of reference and distance concepts and taxonomy methods. It involves the solution of many-criteria problems with the Pareto optimum. Examples demonstrating the effectiveness and universality of the approach are given.     

Film Formation in Binary Sol-Gel Systems

The film-forming capacity of binary systems containing Sb₂O₃, SnO₂, CeO₂, Y₂O₃, Nd₂O₃, Bi₂O₃, V₂O₅, ZnO, CuO, CdO, and Al₂O₃ are investigated. The best film-formers are Sb₂O₃ and SnO₂, whereas ZnO, CuO, CdO, and Al₂O₃ cannot produce films of optical quality. The rest of considered oxides do not impair the clarity of coatings when their molding content is 20 – 50%. A proportional dependence is established between the refractive index and the reflection coefficient of a film and the refractive indexes of oxides making parts of this film, as well as between the concentration of deposited FFS, the film-forming capacity of oxides, and the film thickness.     

The role of iron and its compounds in processes of enrichment of sulfide ores of non-ferrous and noble metals

On the basis of the analysis of the literature data and the data of our investigations, the role of iron and products of its oxidation in sulfide pulps is shown. The technological factors are noted, such as the pH value of the medium, concentration of modifiers, mineral composition, and points and the order of batching flotation reagents; which affect the redox processes with the participation of iron and the characteristics of separation of sulfide minerals during flotation.