Hopping and optical absorption of electrons in nano-porous crystal 12CaO·7Al2O3

Recently it has been discovered that a nano-porous main group oxide 12CaO·7Al₂O₃ (C12A7) can be converted from a wide-gap insulator to a good transparent conductor. Using ab initio modelling we explain good conductivity of this material by very small barriers for hopping of localised electrons between neighbouring positive cages. We show that optical absorption of C12A7 in infrared region and at energies higher than 2.7 eV is due to inter-cage and intra-cage electron transitions, respectively. The proposed mechanisms can be useful in further search for conducting transparent media.     

Finite element piezothermoelasticity analysis and the active control of FGM plates with integrated piezoelectric sensors and actuators

 An efficient finite element model is presented for the static and dynamic piezothermoelastic analysis and control of FGM plates under temperature gradient environments using integrated piezoelectric sensor/actuator layers. The properties of an FGM plate are functionally graded in the thickness direction according to a volume fraction power law distribution. A constant displacement-cum-velocity feedback control algorithm that couples the direct and inverse piezoelectric effects is applied to provide active feedback control of the integrated FGM plate in a closed loop system. Numerical results for the static and dynamic control are presented for the FGM plate, which consists of zirconia and aluminum. The effects of the constituent volume fractions and the influence of feedback control gain on the static and dynamic responses of the FGM plates are examined. Received: 13 March 2002 / Accepted: 5 March 2003 The work described in this paper was supported by a grant awarded by the Research Grants Council of the Hong Kong Special Administrative Region, China (Project No. CityU 1024/01E).     

Self-oscillating dimmable electronic ballast

This paper presents a simple alternative for an electronic ballast operating in self-sustained oscillating mode with dimming capability for fluorescent lamps. A simple modification in one of the gate drivers side circuit allows the lamp to dim without compromising the simplicity, reliability, and low cost which characterize the self-oscillating electronic ballast (SOEB). A qualitative analysis is presented to explain the behavior of the proposed self-oscillating electronic ballast with dimming feature. In addition, the stability and the key equations for the design are derived using the extended Nyquist criterion and describing function method. Experimental results from two 40-W electronic ballasts are presented to demonstrate the performance and to validate the analysis carried out.     

Microchemical Engineering: Components,Plant Concepts User Acceptance – Part I

Over the last five years, many activities have focused on the unexploited field of carrying out reactions on small scales. Due to the rapid development of new components, this paper deals with recent developments only in a compressed form. An important point is the analysis of possible plant concepts for microreactors and whether these are a sensible option. Due to the enormous difference in size between the microchannels and the fluid periphera of possible components this is not just a technical question. It touches on the microtechnology concept as a whole. The direction in which the field should be developed and which measures can be taken to influence its development are questions that are addressed here with respect to the big industrial interest in microreactors.     

Characterization of the Residence Time Distribution in Spray Dryers

In this work it is presented a study on the residence time distribution (RTD) of particles in a co-current pilot-plant spray dryer operated with a rotary atomization system. A nuclear technique is applied to investigate the RTD responses of spray dryers. The methodology is based on the injection of a radioisotope tracer in the feed stream followed by the monitoring of its concentration at the outlet stream. The experiments were performed during the drying of aqueous suspensions of gadolinium oxide. The RTD responses obtained experimentally presented good reproducibility, indicating that the technique applied is well suited to investigating fluid-dynamics of spray dryers. In addition to the experimental investigation, a mathematical model was used to describe the RTD experimental curves.     

Biases of Success Rate Differences Shown in Binomial Effect Size Displays.

The intent of a binomial effect size display (BESD) is to show "the [real-world] importance of [an] effect indexed by a correlation [r]" (R. Rosenthal, 1994, p. 242) by reexpressing this correlation as a success rate difference (SRD) (e.g., treatment group success rate - control group success rate). However, SRDs displayed in BESDs generally overestimate real-world SRDs implied by correlations of (a) dichotomous X and Y variables (φ coefficients), (b) dichotomous X and continuous Y variables (point-biserial coefficients [rphs]). and (c) continuous X and Y variables (rxys). Furthermore, overestimation biases are larger for rxys than for rphs. Differences in the sizes of biases linked to different correlations suggest that BESD SRDs reported for different correlations are not comparable. The stochastic difference index (N. Cliff, 1993: A. Vargha & H. D. Delaney, 2000) is recommended as an alternative to the BESD. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Impact of lead-free soldering processes on the performance of signal relay contacts

Various legislations, rules and regulations in Europe [Restrictions of the use of certain hazardous substances in electrical and electronic equipment (ROHS)] and Japan (Recycling Law for Home Electric Appliances) have either targeted restrictions or a full ban on the use of lead, to be enforced from 2001, 2005, and 2006 onwards. Next to these regulations, marketing arguments are becoming more and more important for so called "GREEN" products. Up to now, mainly tin-lead alloys have been used in electronics. The process temperatures usually applied have been in the range of 230/spl deg/C. All currently discussed lead-free alternatives for professional electronics need process temperatures which are at least 30/spl deg/C higher. In addition, the process duration is significantly longer. The combination of higher process temperatures and longer duration together results in a significant thermal stress on the precision mechanics of the relay. In order to guarantee proper functioning of the relay after the solder process with maximum process temperatures of 255/spl deg/C, the dimensional changes of the plastic parts must be less than a few micrometers in order to guarantee stable contact forces. The outgassing of the used insulating and sealing materials must be minimal in order not to pollute or contaminate the contacts. With the lead-free version of the IM relay, an identical performance and the same reliability during electrical and climatic endurance tests can be expected, even though relays were processed with typical lead-free soldering processes with temperatures up to 255/spl deg/C.     

A military perspective on small unmanned aerial vehicles

In recent years, advancements in three technology areas, microelectronics, MEMS sensors, and GPS receivers, have allowed small UAVs to overcome critical deficiencies and become practical for insertion into the military mainstream. The maturation and commercialization of these technologies have resulted in readily available components that have decreased in both size and cost, to the point where truly low-cost, highly capable, small UAVs are possible. In particular, inertial devices such as MEMS accelerometers and angular rate sensors, pressure sensors, and magnetometers have reached the point where they are reliable, accurate, and affordable. These devices allow the determination of vehicle state with the precision required to enable autonomous flight. In addition, advanced microelectronic devices, such as digital signal processors, field programmable gate arrays, and microcontrollers have enabled sophisticated flight control functions, including fully autonomous flight using GPS waypoints. In combination, these advances have allowed small UAVs such as Pointer, Raven, and Dragon Eye to move into full-scale production and continue to allow the progression of UAVs into smaller and smaller packages. To address several of the deployment issues connected with small UAVs, a gun-launched version, along with the underpinning technologies, is under development. This device represents a clear departure from conventional UAVs with several clear advantages; however, it also contains severe design challenges, as well as test and evaluation dilemmas. An option of this type is envisioned not as a replacement for conventional small UAVs but rather as an augmenting capability.     

Ambient Technology — Now You See It, Now You Don't

The continuing progression of Moore's Law has enabled the miniaturisation and dramatic cost reduction in electronics over the last ten years. For a truly pervasive communications environment the challenges of hiding key hardware technologies from the user are rapidly being overcome. This paper reviews the status of these hardware technology developments in the pervasive space and briefly discusses other contributing factors that will enable the pervasive vision to be realised.