Molecular Cloning and Characterization of cDNA Encoding a Putative Stress-Induced Heat-Shock Protein from Camelus dromedarius

Heat shock proteins are ubiquitous, induced under a number of environmental and metabolic stresses, with highly conserved DNA sequences among mammalian species. Camelus dromedaries (the Arabian camel) domesticated under semi-desert environments, is well adapted to tolerate and survive against severe drought and high temperatures for extended periods. This is the first report of molecular cloning and characterization of full length cDNA of encoding a putative stress-induced heat shock HSPA6 protein (also called HSP70B') from Arabian camel. A full-length cDNA (2417 bp) was obtained by rapid amplification of cDNA ends (RACE) and cloned in pET-b expression vector. The sequence analysis of HSPA6 gene showed 1932 bp-long open reading frame encoding 643 amino acids. The complete cDNA sequence of the Arabian camel HSPA6 gene was submitted to NCBI GeneBank (accession number HQ214118.1). The BLAST analysis indicated that C. dromedaries HSPA6 gene nucleotides shared high similarity (77-91%) with heat shock gene nucleotide of other mammals. The deduced 643 amino acid sequences (accession number ADO12067.1) showed that the predicted protein has an estimated molecular weight of 70.5 kDa with a predicted isoelectric point (pI) of 6.0. The comparative analyses of camel HSPA6 protein sequences with other mammalian heat shock proteins (HSPs) showed high identity (80-94%). Predicted camel HSPA6 protein structure using Protein 3D structural analysis high similarities with human and mouse HSPs. Taken together, this study indicates that the cDNA sequences of HSPA6 gene and its amino acid and protein structure from the Arabian camel are highly conserved and have similarities with other mammalian species.     

Propylsulfonic acid-functionalized partially crystalline silicalite-1 materials: synthesis and characterization

Propylsulfonic acid-functionalized partially crystalline silicalite-1 materials were synthesized via one step co-condensation technique by varying the molar ratio of organosilane source, 3-mercaptopropyltrimethoxysilane (3MP) to tetraethylorthosilicate (TEOS) in the range of 0.05–0.30, and subsequent oxidation of thiol group to propylsulfonic acid using hydrogen peroxide (H₂O₂). These materials were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM) and nitrogen adsorption–desorption method. The structure of these materials was determined by Fourier transform infrared spectroscopy (FT-IR) and ²⁹Si and ¹³C solid state NMR. XRD results show that % crystallinity of the materials decreased with the increase in 3MP concentration in the synthesis mixture. Selected area electron diffraction (SAED) showed the presence of crystalline and amorphous phases in the samples. An amorphous phase was formed when 3MP concentration was 30 mol% of the total silica source. After elimination of the structure directing agent (SDA) by calcination at 420 °C, thermogravimetric analysis (TGA) shows that the structure was thermally stable up to 550 °C. Ammonia temperature-programmed desorption (NH₃-TPD) shows that the acid capacity of these materials was in the range of 1.19–1.83 mmol H⁺/g, which shows that these materials could be used as potential heterogeneous acid catalyst.     

Morphological and separation performance study of polysulfone/titanium dioxide (PSF/TiO2) ultrafiltration membranes for humic acid removal

In this study, polysulfone (PSF) hollow fiber membranes with enhanced performance for humic acid removal were prepared from a dope solution containing PSF/DMAc/PVP/TiO₂. The main reason for adding titanium oxide during dope solution preparation was to enhance the antifouling properties of membranes prepared. In the spinning process, air gap distance was varied in order to produce different properties of the hollow fiber membranes. Characterizations were conducted to determine membrane properties such as pure water flux, molecular weight cut off (MWCO), humic acid (HA) rejection and resistance to fouling tendency. The results indicated that the pure water flux and MWCO of membranes increased with an increase in air gap distance while HA retention decreased significantly with increasing air gap. Due to this, it is found that the PSF/TiO₂ membrane spun at zero air gap was the best amongst the membranes produced and demonstrated > 90% HA rejection. Analytical results from FESEM and AFM also provided supporting evidence to the experimental results obtained. Based on the anti-fouling performance investigation, it was found that membranes with the addition of TiO₂ were excellent in mitigating fouling particularly in reducing the fouling resistances due to concentration polarization, cake layer formation and absorption.     

Influence of Single-Walled Carbon Nanotubes on the Performance of Poly(Azomethine-Ether) Composite Materials

The present work is aimed to fabricate a new set of composite materials containing conducting poly(azomethine-ether) reinforced with single-walled carbon nanotubes in the form of single-walled carbon nanotube/poly(azomethine-ether)_1–5 for excellent enhanced thermal as well as conducting behavior of poly(azomethine-ether). Single-walled carbon nanotubes of variable loading have been embedded into conducting poly(azomethine-ether) using in situ polymerization technique. Before attempting the polymerization, 1,3-thiazole established poly(azomethine-ether) and its conformable monomers have been prepared and their chemical structures have been correlated by spectral analyses. Furthermore, η_inh and M_w values for poly(azomethine-ether) were found 0.89?dL?g^?1 and 39723.6, respectively. The fabricated single-walled carbon nanotube/poly(azomethine-ether)_1–5 composites were specified and characterized by wide-angle X-ray diffraction patterns, Fourier transform infrared spectroscopy, thermal behavior, scanning electron microscopy, and transmission electron microscopy characterization techniques. A perfect indicative response for this composite material was estimated by Fourier transform infrared spectra and X-ray diffraction as well. Both techniques displayed all intensive characteristic peaks regarding single-walled carbon nanotubes and poly(azomethine-ether) in the spectra or diffraction pattern for single-walled carbon nanotube/poly(azomethine-ether)_1–5. The role of single-walled carbon nanotubes on the performance of poly(azomethine-ether) was considerably examined. Single-walled carbon nanotube/poly(azomethine-ether)_1–5 showed relatively higher thermal stability. Single-walled carbon nanotube/poly(azomethine-ether)₁ displayed the lowest final composite degradation temperature value (552°C), whereas single-walled carbon nanotube/poly(azomethine-ether)₅ displayed the highest value (621°C). T₁₀ and T₂₅ values showed a gradual temperature increased while single-walled carbon nanotubes increased. Single-walled carbon nanotube/poly(azomethine-ether)₁ showed the lowest thermal stability and single-walled carbon nanotube/poly(azomethine-ether)₅ showed the highest thermal stability between all fabricated products. Furthermore, transmission electron microscopy images showed a prominent increase in single-walled carbon nanotubes diameters (40–60?nm). The conductivity values were significantly increased while single-walled carbon nanotubes content was increased and reached to the semiconductors. ε′ values were also increased in both single-walled carbon nanotube/poly(azomethine-ether)_4,5 which have higher single-walled carbon nanotubes content.     

Compressive mechanical properties of sawdust/high density polyethylene composites under various strain rate loadings

This article is concerned with the static and dynamic mechanical properties of high‐density polyethylene (HDPE) reinforced with sawdust (SD) at a strain rate of up to 10³ s^?1. In this study, the static and dynamic properties of HDPE/SD composites with different filler loadings of 5, 10, 15, 20, and 30 wt% SD were deliberated at different levels of strain rates (0.001, 0.01, 0.1, 650, 900, and 1100 s^?1) using a conventional universal testing machine and the split Hopkinson pressure bar apparatus. The results showed that the stress–strain curves, yield behavior, stiffness, and strength properties of the HDPE/SD composites were strongly affected by both the strain rate and the filler loadings. Furthermore, the rate sensitivityof the HDPE/SD composites showed a great dependency on the applied strain rate, increasing as the strain rate increased. However, the thermal activation values showed a contrary trend. Meanwhile, for the postdamage analysis, the results showed that the applied strain rates influenced the deformation behavior of the tested HDPE/SD composites. Moreover, for the fractographic analysis at dynamic loading, the composites showed that all the specimens underwent a severe catastrophic deformation. J. VINYL ADDIT. TECHNOL., 24:162–173, 2018. © 2016 Society of Plastics Engineers     

Synthesis of poly(acrylonitrile‐co‐divinylbenzene‐co‐vinylbenzyl chloride)‐derived hypercrosslinked polymer microspheres and a preliminary evaluation of their potential for the solid‐phase capture of pharmaceuticals

Poly[acrylonitrile (AN)‐co‐divinylbenzene (DVB)‐co‐vinylbenzyl chloride (VBC)] terpolymers were synthesized by precipitation polymerization in the form of porous polymer microspheres. The poly(AN‐co‐DVB‐co‐VBC) polymers were then hypercrosslinked, via a Friedel‐Crafts reaction with FeCl₃ in nitrobenzene, to provide a significant uplift in the specific surface areas of the polymers. FTIR spectra of the hypercrosslinked poly(AN‐co‐DVB‐co‐VBC)s showed that the chloromethyl groups derived from VBC were consumed by the Friedel‐Crafts reactions, which was consistent with successful hypercrosslinking. Hypercrosslinking installed a number of new, small pores into the polymers, as evidenced by a dramatic increase in the specific surface areas upon hypercrosslinking (from ～530 to 1080 m² g^?1). The hypercrosslinked polymers are very interesting for a range of applications, not least of all for solid‐phase extraction (SPE) work, where the convenient physical form of the polymers (beaded format), their low mean particle diameters, and narrow particle size distributions, as well as their high specific surface areas and polar character (arising from the AN residues), make them attractive candidates as SPE sorbents. In this regard, in a preliminary study one of the hypercrosslinked polymers was utilized as an SPE sorbent for the capture of the polar pharmaceutical diclofenac from a polar environment. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45677.     

Calculation of Detonation Properties of Gaseous Explosives Using Generalized Reduced Gradient Nonlinear Optimization

In this paper, a study on the development of a numerical modeling of the detonation of C H N O‐based gaseous explosives is presented. In accordance with the numerical model, a FORTRAN computer code named GasPX has been developed to compute both the detonation point and the detonation properties on the basis of Chapman–Jouguet (C‐J) theory. The determination of the detonation properties in GasPX is performed in chemical equilibrium and steady‐state conditions. GasPX has two improvements over other thermodynamic equilibrium codes, which predict steady‐state detonation properties of gaseous explosives. First, GasPX employs a nonlinear optimization code based on Generalized Reduced Gradient (GRG) algorithm to compute the equilibrium composition of the detonation products. This optimization code provides a higher level of robustness of the solutions and global optimum determination efficiency. Second, GasPX can calculate the solid carbon formation in the products for gaseous explosives with high carbon content. Detonation properties such as detonation pressure, detonation temperature, detonation energy, mole fractions of species at the detonation point, etc. have been calculated by GasPX for many gaseous explosives. The comparison between the results from this study and those of CEA code by NASA and the experimental studies in the literature are in good agreement.     

Enzyme Processing of Soy Flour with Minimized Protein Loss

The enzymatic treatment of defatted soy flour (SF) to reduce indigestible carbohydrates can result in undesirable protein loss. Here protein loss was minimized with quantitation of the effects of ionic strength (IS), protease activity, and SF toasting. At the enzyme processing condition (25% w/v SF, 50 °C, pH 4.8, 48 hours), protein loss increased linearly with the IS in enzyme broths (EB); e.g., contacting untoasted SF with water or heat-deactivated EB showed protein loss of 28% in water but up to 40% when IS was increased in the range of 0.04–0.19 M. Protein loss also increased with protease in EB (nondeactivated): after adjusted for IS-related loss, approximately 10% and 25% additional protein loss occurred in EB of 73 and 490–557 U/(g SF) protease, respectively. SDS-PAGE results showed that proteolysis was not extensive, mainly on β-conglycinin α'/α and glycinin acidic 37-kDa subunits; and most of the proteolytic products could be recovered by heat-induced precipitation. SF toasting effects were studied, particularly at 2-hours 160°C, with material balances, protein distributions, and monosaccharide yields in hydrolysates. Overall, protein loss was minimized to 5.2% and the conversion of carbohydrate to monomeric sugars increased to 89.2%.     

Rotational molding cycle time reduction through surface‐enhanced molds,Part B: Experimental study

Rotational molding is a process used to manufacture hollow plastic products, and has been heralded as a molding method with great potential. Because of long production cycle times, which are limited by the time required to heat‐up and cool‐down the mold and the product, its productivity is hampered. To address this issue, exterior mold modification techniques (i.e. the application of extended and rough surfaces) have been employed to enhance heat transfer to and from molds, ultimately reducing cycle times. Extended surfaces have the potential to enhance heat transfer by increasing the surface area. Roughness elements are utilized in conjunction with turbulent flows, also producing significant increases in heat transfer rates. Experimental results presented here demonstrate very significant cycle time reductions through the use of surface‐enhanced molds. The experimental savings are in the order of 18 and 28%, whereas the predicted cycle time reductions are around of 21 and 32% for roughness‐enhanced and pin‐enhanced molds, respectively. Although the prediction methods have been unable to forecast the exact experimental cycle times very accurately, they have proved to be useful for predicting the approximate cycle time reductions and the relative rankings of the plain and the surface‐enhanced molds. POLYM. ENG. SCI., 47:1420–1429, 2007. © 2007 Society of Plastics Engineers