Optimization of Enzymatic Process Condition for Protein Enrichment,Sugar Recovery and Digestibility Improvement of Soy Flour

Soy protein is a valuable nutritional supplement for food and animal feed. While protein constitutes ~50 % of defatted soy flour (SF), it coexists with complex carbohydrates (30–35 %) which may have anti‐nutritional effects. An enzymatic process can remove the carbohydrate and produce protein‐enriched soy products. The hydrolysate with monomerized carbohydrates is valuable fermentation feedstock. In this study, Aspergillus niger and Trichoderma reesei enzymes were compared for use in the process. Effects of pH (3.2–6.4), temperature (40–60 °C), enzyme‐to‐SF ratio (0–2 ml/g) and SF loading (150–350 g/l) were evaluated for the enzymatic conversion of SF carbohydrate to reducing sugar (Y_RS) and total soluble carbohydrate (Y_TC) in the hydrolysate. Effects of these single factors and interactions between factors were investigated. Optimal pH and temperature were similar for both enzymes: pH 4.8 and 50–51 °C for Y_TC, and pH 5.1–5.2 and 48–51 °C for Y_RS. The two enzymes also gave similar protein contents in resultant soy protein concentrates, i.e., 74–75 % with 2 ml/g enzyme broth and 150 g/l SF, which were higher than the 64–68 % protein in commercial concentrates. A. niger enzyme was significantly more effective in carbohydrate conversion, achieving Y_RS = 75 % and Y_TC = 78 % with 2 ml/g enzyme and 150 g/l SF, higher than the Y_RS (30 %) and Y_TC (64 %) obtained with T. reesei enzyme. Monomerization was essentially complete in hydrolysate produced with A. niger enzyme.     

Correct Prediction of the Vibration Behavior of a High Power Ultrasonic Transducer by FEM Simulation

This paper presents a study on three types of finite element analyses of high power ultrasonic transducer by using the finite element commercial software called ANSYS. The transducer geometry was treated as a 2D axi- symmetric model, 3D quart and full 3D model. For all of the simulations the modeled transducer was used in modal analysis and harmonic solutions to understand its mechanical behavior and its natural frequency. A comparison was made between each type of modeling and experimental results. This comparison allows the parameters of FEM models to be iteratively adjusted and optimized and also leads to selection of the best modeling type. The achieved FEM results exhibited a remarkably high predictive potential of ANSYS in modeling and simulation and allowed control on the design and on the vibration behavior of the high power ultrasonic transducer.     

Drying Kinetics,Texture, Color,and Determination of Effective Diffusivities During Sun Drying of Chempedak

Sun drying of chempedak (Artocarpus integer) was carried out on different sample sizes to investigate the effects on product quality. Fick's second law model was used to determine the effective diffusivities of sun–dried chempedak slabs based on the drying rate versus moisture content plots. In addition, texture degradation and total color changes were investigated. The texture and color changes of dried chempedak were relatively significant (p < 0.05) compared to fresh chempedak. There was an increase in dried fruit hardness and chewiness but a decrease in springiness and cohesiveness during drying.     

The effect of magnetic and optic field in water electrolysis

Hydrogen production via water electrolysis was studied under the effect of magnetic and optical field. A diode solid state laser at blue, green and red were utilized as optical field source. Magnetic bar was employed as external magnetic field. The green laser has shown a greatest effect in hydrogen production due to its non-absorbance properties in the water. Thus its intensity of electrical field is high enough to dissociation of hydronium and hydroxide ions during orientation toward polarization of water. The potential to break the autoprotolysis and generate the auto-ionization is the mechanism of optical field to reveal the hydrogen production in water electrolysis. The magnetic field effect is more dominant to enhance the hydrogen production. The diamagnetic property of water has repelled the present of magnetic in water. Consequently the water splitting occurs due to the repulsive force induced by the external magnetic field. The magnetic distributed more homogenous in the water to involve more density of water molecule. As a result hydrogen production due to magnetic field is higher in comparison to optical field. However the combination both fields have generated superior effect whereby the hydrogen yields nine times higher in comparison to conventional water electrolysis.     

Effect of expandable graphite and ammonium polyphosphate on the thermal degradation and weathering of intumescent fire-retardant coating

This research aims to study the effect of ammonium polyphosphate and expandable graphite on the intumescent coating formulations (ICF). The coating presented in this research article is based on carbon source expandable graphite (EG), blowing agent melamine, acid source ammonium polyphosphate (APP), epoxy resin as a binder with polyamide amine. The stability of the developed coating was verified at 950°C for 1-hour fire test. The results showed that the coating is stable and well bond with the steel substrate. The char was characterized by using FESEM, XRD, FTIR, DTA, TGA, XPS, Py-GCMS and Weathering Test. The morphology of the char was studied by SEM of the coating after furnace fire test. XRD and FTIR show the presence of graphite, borophosphate; boron oxide and sassolite in the residual char. TGA and DTG disclosed that EG improved the residual mass of coating. XPS analysis showed the char residue of IF5-APP-EG contains carbon and oxygen contents 47.50 and 40.70, respectively. Py-GCMS analysis described that the IF5-APP-EG released less gaseous compounds. The weathering test illustrated that's the char expansion of coatings samples was decreased due to the presence of a humid environment and UV light. The IF5-APP-EG showed the maximum char expansion, lower substrate temperature and high residual weight among the studied formulations.     

Remote robotic assembly guided by 3D models linking to a real robot

This paper presents a 3D model-driven remote robotic assembly system. It constructs 3D models at runtime to represent unknown geometries at the robot side, where a sequence of images from a calibrated camera in different poses is used. Guided by the 3D models over the Internet, a remote operator can manipulate a real robot instantly for remote assembly operations. Experimental results show that the system is feasible to meet industrial assembly requirements with an acceptable level of modelling quality and relatively short processing time. The system also enables programming-free robotic assembly where the real robot follows the human's assembly operations instantly.     

Hollow micro-mesoporous carbon polyhedra produced by selective removal of skeletal scaffolds

An approach has been demonstrated for fabricating hollow micro-mesoporous carbon polyhedra by selective removal of the skeletal scaffolds of polyurethane (PU) foam in monolithic mesostructured resin/PU composites. Hollow micro-mesoporous carbon polyhedra with an irregular shape molded from the cellular cavities of PU foam were synthesized by using phenolic resol as a precursor, triblock copolymer Pluronic F127 as a template, PU foam as a skeletal scaffold and triethyl phosphate as a reaction agent. By a reaction with triethyl phosphate, the PU foam in resin/PU composites can be degraded, simultaneously leading to the disassembly of the monolithic structure into separated polyhedral particles. The method can also be used for synthesizing hollow micro-mesoporous carbon–silica polyhedra, using tetraethyl orthosilicate as a silica source. Moreover, after etching the silica away, hollow micro-mesoporous carbon polyhedra with an ordered hexagonal mesostructure (space group p6mm), large particle sizes of 65–500 μm, a large surface area of 1384 m² g^?1, a uniform pore size of 3.2 nm and a high pore volume of 1.15 cm³ g^?1 as well as a high mesoporosity of 81% can be obtained, which exhibits excellent adsorption performance toward methylene blue compared with the active carbon having a similar surface area.     

Extraction equilibrium conditions of beryllium and aluminium from a beryl ore for optimal industrial beryllium compound production

This study examines the extraction of beryllium and aluminium from a Nigerian beryl ore using Cyanex®272 in kerosene from an aqueous sulphate pregnant solution. Parameters such as extractant concentration and equilibrium pH that dictates the extraction yield were studied. Under the following conditions: temperature 27?±?2°C, phase ratio 1?1, about 45.50 and 46.76% of beryllium and aluminium were extracted by 0.15?mol?L^?1 Cyanex®272 concentration within 30?min. However, the extraction yield of beryllium and aluminium was increased to 91.68% and 97.89% at equilibrium pH of 3 and 4, respectively, for beryllium and aluminium at 27?±?2°C. A 0.05?mol?L^?1 H₂SO₄ solution was found to be adequate for the stripping of about 99.00% Be and 95.40% Al from the loaded organic phase. The pure solutions containing metal ions were accordingly beneficiated to obtain beryllium and aluminium compounds of industrial values.     

Genesis of nanocrystalline Ho2O3 via thermal decomposition of holmium acetate: Structure evolution and electrical conductivity properties

This study focuses on the preparation of nanostructured holmium oxide via the decomposition of holmium acetate precursor utilizing the non-isothermal strategy. Thermogravimetric analysis(TGA) was used to follow up the various thermal events involved in the decomposition process. Dehydration completes approximately at 150℃, which is followed by the decomposition of the anhydrous acetate leading to the formation of holmium oxide. Based on the TGA results the acetate precursor was heated non-isothermally at the temperature range of 150 e700℃. The obtained solids were characterized using powder X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS), Fourier transform infrared spectroscopy(FT-IR), field-emission scanning electron microscopy(FE-SEM) and transmission electron microscopy(TEM). It is found that nanocrystalline Ho_2 O_3 starts to form at 500℃ and presents the only phase detected at the 500 e700℃ range. The electrical conductivity of the solids that form at the temperature range of 300 e700℃ was investigated. The obtained values were correlated with the observed structural modifications accompanying the heat treatment. The electrical conductivity of the Ho_2 O_3 samples prepared at 500, 600 and 700℃ reaches the values of 1.92 × 10~(-7), 1.61 × 10~(-7) and 8.33 × 10~(-8) Ω~(-1)cm~(-1) at a measuring temperature of 500℃, respectively. These values are potentially advantageous for high-resistivity devices.     

Magnetron sputtered Dy_2O_3 with chromium and copper contents for antireflective thin films with enhanced absorption

Dy_2O_3 is a rare earth oxide having a number of advanced applications in various fields including protective or antireflective coatings, Main objective of this novel research work is to check the effect of Cr and Cu addition on different properties of Dy_2O_3 and achievement of antireflective thin films with enhanced abso rption. Thin films of these materials we re deposited using DC magnetron with reactive cosputtering. XRD studies reveals the crystalline nature of thin films having Dy_2O_3(222) reflection in all samples with Cr_2O_3(116) and CuO(111) reflections in Cr and Cu containing compositions. Field emission scanning electron microscopy demonstrates the homogeneous deposition of thin films with uniform shape, size and distribution of grains. Refractive index, extinction coefficient and absorption coefficient significantly increase while optical reflectance decreases with Cr and Cu mediation corroborating an improved antireflective mechanism. The imaginary part of dielectric constant is found to increase slightly with low tangent loss for Cr containing composition co nsidered favorable for energy storage applications.