A nondominated ranked genetic algorithm for bi-objective single machine preemptive scheduling in just-in-time environment

Motivated by just-in-time (JIT) manufacturing, we study the bi-objective scheduling problem of minimizing the total weighted earliness and the number of tardy jobs on a single machine, in which machine idle time and preemption are allowed. The problem is known to be NP-hard. In this paper, we propose a new mathematical model, with nonlinear terms and integer variables which cannot be solved efficiently for medium- and large-sized problems. A method combining the new ranked-based roulette wheel selection algorithm with Pareto-based population ranking algorithm, named nondominated ranking genetic algorithm (NRGA), has been presented to find nondominated solutions in a reasonable time. Various operators and parameters of the proposed algorithm are reviewed to calibrate the algorithm by means of the Taguchi method. A number of numerical examples are solved to demonstrate the effectiveness of the proposed approach. The solutions obtained via NRGA are compared against solutions obtained via ε-constraint method in small-sized problems. Experimental results show that the proposed NRGA is competitive in terms of the quality and diversity of solutions in medium- and large-sized problems.     

Wear assessment of plasma nitrided AISI H11 steel

Plasma nitriding is one of the effective methods for improvement of the hardness, wear and corrosion resistance of steels. In this research AISI H11 hot working tool steel was plasma nitrided in various gas mixtures for different times and temperatures. The morphology, size and composition of nitride nanoparticles formed on the surface of the specimens were investigated using scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD). The wear behavior of plasma nitrided samples was studied by means of unlubricated pin-on-disc method under constant load of 80 N, sliding speed of 1 m/s, sliding distance of 2000 m at room temperature. The results showed plasma nitriding process improved the wear behavior of H11 steel. The increase in time and temperature of plasma nitriding decreased the hardness and increased the wear weigh loss of the specimens.     

Switched diversity approach for multireceiving optical wireless systems

A number of existing spatial diversity schemes have been shown to improve the performance of optical wireless communication systems in diversity-rich environments. Among all, switched diversity has low complexity and is simple to implement. In this paper, an innovative spatial diversity scheme based on switched diversity is proposed. The scheme, namely switch-to-dominant combining, contributes to a higher bit error rate (BER) performance when compared to conventional switched diversity schemes, including switch-and-stay and switch-and-examine diversity. The optical multireceiver wireless system operates in a spatially correlated and lognormally distributed fading channel. Analytical analyses are conducted to demonstrate BER and processing load performance offered by the new scheme and compare them to available schemes, i.e., conventional switched combining and selection combining.     

UPTIME: an IMS-based mobility framework for next generation mobile networks

Seamless inter-technology mobility is one of the fundamental requirements of next generation mobile networks. For seamless mobility, handover delay and packet loss should be minimized. However, existing solutions suffer from a number of shortcomings in satisfying these requirements: first, handover preparation schemes fail to minimize the handover delay as much as possible. Second, minimizing packet loss which is usually using soft handover (SHO) schemes are excessively wasteful of scarce resources. In this paper, we propose the uninterrupted proactive connection transfer for IMS mobility enhancement (UPTIME) mobility framework which achieves seamless mobility while minimizing excessive power and radio resource consumption. UPTIME incorporates two mechanisms; a proactive handover preparation method and an optimized SHO technique for handover execution. We demonstrate the benefits of the proposed framework through both analysis and simulation. Our simulation results for typical LTE/WiMAX handovers show that the handover preparation delay can be reduced by 70 %, and good packet loss performance can be achieved whilst saving 43 % of radio resources and 48 % of battery power.     

Measurement of Urbach edge and midgap states in amorphous silicon p-i-n devices

Urbach energy of valence band tails and mid-gap defect densities are important parameters for determining the performance of amorphous silicon (a-Si:H) devices. In this paper, we examine a technique which allows one to determine these parameters in device structures, as opposed to in films. The technique consists of measuring sub-gap quantum efficiency as a function of reverse bias and photon wavelength. We show that there is a distinction between the response of tail states and mid-gap states to the application of reverse bias, and that by analyzing these differences, one can locate the energies of the mid-gap states in the device. The technique gives an accurate measurement of Urbach edge of tail states, even on textured substrates, but only estimates mid-gap states within a factor of 2.     

Intrinsic reaction rate and the effects of operating conditions in dimethyl ether synthesis from methanol dehydration

The kinetic behavior of a commercial γ-Al₂O₃ catalyst for the methanol to dimethyl ether (DME) dehydration reaction has been investigated using a differential fixed bed reactor at the pressure range 1–16 barg within a temperature range of 260–380 °C. The experimental runs were performed in a wide range of feed to water ratios. The experiments were designed by general full factorial design (GEFD) and a novel rate equation has been developed which exhibited the best fitting with our experimental data. Based on the analysis of variance (ANOVA), the following order of importance for operating conditions was obtained when the objective function is the yield of DME: Temperature >Water % in feed >Pressure. In addition, the optimum operating conditions for the maximum yield of DME, were found at T= 380°C, P=16 barg and zero wt% of water in the feed.     

Fault‐tolerant control of distributed systems by information pattern reconfiguration

Given a fault‐tolerance strategy and a distributed control system, the set of recoverable faults depends on the information pattern that is implemented. This paper shows that fault‐tolerance can be achieved, when possible, by the reconfiguration of the information pattern. A necessary and sufficient recoverability condition is provided, and sub‐optimal solutions are developed for actuator and sensor faults under system reconfiguration. Copyright © 2014 John Wiley & Sons, Ltd.     

Biologically‐synthesised ZnO/CuO/Ag nanocomposite using propolis extract and coated on the gauze for wound healing applications

Wound healing has long been recognised as a major clinical challenge for which stablishing more effective wound therapies is necessary. The generation of metallic nanocomposites using biological compounds is emerging as a new promising strategy for this purpose. In this study, four metallic nanoparticles (NPs) with propolis extract (Ext) and one without propolis including ZnO/Ext, ZnO/Ag/Ext, ZnO/CuO/Ext, ZnO/Ag/CuO/Ext and ZnO/W were prepared by microwave method and assessed for their wound healing activity on excision experimental model of wounds in rats. The developed nanocomposites have been characterised by physico‐chemical methods such as X‐ray diffraction, scanning electron microscopy, diffuse reflectance UV–vis spectroscopy, Fourier transform infrared spectroscopy, thermogravimetric analysis and Brunauer–Emmett–Teller analyses. The wounded animals treated with the NPs/Ext in five groups for 18 days. Every 6 days, for measuring wound closure rate, three samples of each group were examined for histopathological analysis. The prepared tissue sections were investigated by haematoxylin and Eosin stainings for the formation of epidermis, dermis and muscular and Masson''s trichrome staining for the formation of collagen fibres. These findings toughly support the probability of using this new ZnO/Ag/Ext materials dressing for a wound care performance with significant effect compared to other NPs.Inspec keywords: nanomedicine, X‐ray diffraction, II‐VI semiconductors, visible spectra, ultraviolet spectra, nanocomposites, biomedical materials, proteins, wounds, nanoparticles, scanning electron microscopy, nanofabrication, skin, zinc compounds, silver, antibacterial activity, Fourier transform infrared spectra, copper compounds, molecular biophysicsOther keywords: propolis, wound healing applications, effective wound, metallic nanocomposites, biological compounds, metallic nanoparticles, microwave method, wound healing activity, physico‐chemical methods, Fourier transform infrared spectroscopy, diffuse reflectance UV‐vis spectroscopy, Brunauer‐Emmett‐Teller analyses, wounded animals, wound closure rate, wound care performance, histopathological analysis, scanning electron microscopy, X‐ray diffraction, thermogravimetric analysis, haematoxylin, Eosin stainings, Masson trichrome, epidermis, muscular trichrome, collagen fibres, time 18.0 d, time 6.0 d, ZnO‐CuO‐Ag     

A new ultra-wideband fractal monopole antenna

The paper focuses on the peculiar dynamic behaviour of the recently developed 8 mm² TO-220-packaged, high-voltage, double-interdigitated (or rwo interdigi-tation levels—TIL) GTO thyristor. This novel power device was rated under both slightly and heavily inductive resistive loads, i.e. close to the real conditions encountered in practical power circuits employing GTO thyristors. Emphasis is laid on the ability of TIL GTOs to switch safely, with minimum power losses, a certain amount of anode current under high-voltage conditions and high commutation frequencies. The merits of TIL GTO thyristors are analysed in terms of their reliability and switching efficiency, which include the total power losses (conduction and switching losses), turn-on and turn-off gains and the switching speed. It is shown that thanks to their built-in self-protective features, these novel GTOs possess an enhanced current-handling capability at commutation frequencies up to 50kHz under extremely tough load conditions. The main implications of the results for power applications are outlined.     

A density-based fuzzy clustering technique for non-destructive detection of defects in materials

In non-destructive testing and evaluation of materials, defects contain visible aggregations of similar levels of brightness with large scale of correlation between them. In most cases, these brightnesses have no notable contrast relative to non-defect counterparts. However, the density and the size of the defect are visually the most notable features. In this paper, we have utilized human conception for classifying defects by the fusion of fuzzy clustering method and fuzzy logic rules based on the density and the size of the defect. The probability of detection and the probability of error are compared with the Bayes classifier. The proposed approach shows that there is less dependency between the variation of density and size of a defect and variations of noise density and distribution. Experimental images from eddy current, ultrasonic and radiography techniques are investigated. It is shown that the new approach reduces the noise and drift, leading to a better detection of defects.