Power efficiency enhancement analysis of an inverse class D power amplifier for NB-IoT applications

Analog Integrated Circuits and Signal Processing - The power amplifiers (PAs) are generally the most power-consuming building blocks in Radio Frequency (RF) transceivers. This paper presents a high...     

Deactivation of Pt/wire-mesh and vanadia/monolith catalysts applied in selective catalytic reduction of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> in flue gas

In this study the deactivation of Pt/wire mesh and vanadia/monolith catalysts by aerosol particles of some inorganic salts (K₂SO₄, KCl and ZnCl₂) with high or low melting points has been investigated. The aerosol particles may either diffuse within the matrix of the catalysts and block the mezzo and micro pores, or deposit on the outer surface of the catalysts and form a porous layer causing a mass transfer resistance that ultimately deactivates the catalysts. It has been observed that in both Pt/wire mesh and vanadia/monolith catalysts the deactivation effect of ZnCl₂ was more pronouced compared to other salts. As an example, after 31 hours of exposure to ZnCl₂, 10% of the catalysts activities was lost. This may be related to the ZnCl₂ lower melting point in comparison with other poisons. These results are in agreement with the previous findings for deactivation of wire-mesh catalysts used for oxidation of volatile organic compounds (VOC) and CO by exposing the catalysts to the aerosols generated from inorganic salts.     

Energy absorption capacity of ferroelectrets based on porous polypropylene

Ferroelectret materials are special group of piezoelectric materials obtained from the cellular structure of nonpolar polymers. They are under investigation for a variety of applications such as actuators, vibration control, speakers, microphones, sensors, as well as healthcare monitoring systems. In this work, the effect of morphological and mechanical properties of ferroelectret films on their capacitance and stored energy capacity was studied. Different eye‐like cellular structure of porous polypropylene films with different cell aspect ratio (AR) and mechanical properties were used. The optimized sample was obtained with AR = 6.6 using nitrogen (N₂) as the ionizing gas to give a quasi‐static piezoelectric coefficient (d₃₃) of about 800 pC/N, an electrode charge density of about 2.10 mC/m², a maximum capacitance of about 465 pF, as well as a maximum stored energy capacity of about 1,824 pJ. It was observed that replacing air with N₂ as the ionizing gas led to an increase in charge/voltage output. Moreover, by replacing air with N₂ as the ionizing gas, the capacitance and stored energy of the samples were improved by about 20% and 80%, respectively. Hence, it can be concluded that the capacitance was mostly related to the cellular morphology of the samples while the stored energy was also function of the ionizing gas used. POLYM. ENG. SCI., 58:300–309, 2018. © 2017 Society of Plastics Engineers     

Corrosion and wear behavior of alumina‐polyester nanocomposite coatings

The corrosion and wear behavior of powder coatings fabricated by the electrostatic method was investigated in this study. Pure polyester coating and fabricated nanocomposite powder coating with 10 and 20 mass.% alumina nanoparticles were coated with electrostatic spraying method on the surfaces of carbon steel substrate. Coatings were cured in two regimes by oven and microwave for the appropriate time. The effects of alumina nanoparticles on the corrosion resistance of coated samples were studied by immersion and electrochemical impedance spectroscopy (EIS) tests. Also, pin‐on‐disk test was applied to evaluate the wear properties and coefficient of friction (COF) of the coatings. The results of the corrosion test reveal that the samples with 10 mass.% alumina show the best corrosion resistance and cause a reduction in corrosion rates which is about 36 times to that of the pure sample. The wear rate of nanocomposite coatings is 10 times lower than that of pure ones and also the coefficient of friction of nanocomposite samples is almost half of the pure samples. Furthermore, the nanocomposite coatings cured in the microwave show better protection properties and wear resistance than that of ones cured in an oven. POLYM. ENG. SCI., 57:846–856, 2017. © 2016 Society of Plastics Engineers     

Microfunnel magnetic stirring-assisted dispersive liquid–liquid microextraction-derivatization technique,for the determination of 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (Mutagen X) in aqueous samples by GC-ECD

A simple, highly sensitive and reliable microfunnel magnetic stirring-assisted dispersive liquid–liquid microextraction method (MF-MSA-DLLME) was developed based on the derivatization of mutagen X in aqueous samples and determined using gas chromatography with electron capture (GC-ECD). The effects of different variables on the extraction efficiency were investigated and optimized. The calibration curve showed good linearity in the concentration range of 0.05–400 μgL^?1 (r² = 0.998) and precision (RSD = 5.0%). Under optimum conditions, the limit of detection (LOD) and the limit of quantification in drinking water were 0.015 and 0.05 µg L^?1, respectively. The developed method was successfully applied for the determination of six Mutagen X (MX) in real samples.     

Effect of TiO2 nanoparticle on rheological behavior of poly(vinyl alcohol) solution

In recent years, addition of nanoparticles to fluids and polymers has been used as a way of modifying rheological properties. Poly(vinyl alcohol) (PVA) and titanium dioxide (TiO₂) nanoparticles aqueous composite nanofluids were prepared through the use of ultrasonic vibration. In fact, ultrasonic vibration is an advantageous method for nanoparticle dispersion. The preparation method prevents reduction of the polymer's molecular weight. TiO₂ nanoparticles with different concentrations were employed to investigate the rheological characteristics of composite nanofluids. Rheological characteristics of base fluids and composite nanofluids were measured at different temperatures. Based on the results, all composite nanofluids, as well as base fluids, exhibited non‐Newtonian behavior and rheological characteristics of composite nanofluids, following the Herschel‐Bulkley model. In addition, model parameters are functions of temperature, PVA, and TiO₂ nanoparticle concentrations. Also, two‐way interactions among temperature, PVA, and TiO₂ nanoparticle concentrations affect flow index and consistency index of the Herschel‐Bulkley model. J. VINYL ADDIT. TECHNOL., 23:234–240, 2017. © 2015 Society of Plastics Engineers     

Numerical modeling of an umbrella arch as a pre-support system in difficult geological conditions: a case study

In order to prevent the collapse of ceilings and walls of large tunnels, especially in difficult geological conditions, either a sequential excavation method (SEM) or ground reinforcing method, or a combination of both, can be utilized. The first part of the adit tunnel in northwestern Iran is being drilled in alluvium material with very weak geotechnical parameters. Despite applying an SEM in constructing this tunnel, analyzing the numerical modeling done using FLAC3D, as well as observations during drilling, indicate tunnel instability. To increase operational safety and to prevent collapse, a pre-support system was designed and implemented. The results of the numerical modeling accompanied by monitoring during operation, as well as the results of instrumentation, indicate the efficacy of this method for preventing collapse in alluvium material along the tunnel route. Modeling the behavior of the umbrella arch shows that the location of the maximum compressive force will change with a change in the tunnel arc location. Moreover, displacement, force and moment exerted on the pipes will change during drilling steps according to a certain pattern.     

Synthesis of superabsorbent hydrogel nanocomposites for use as hemostatic agent

Uncontrolled hemorrhage continues to be the major cause of death in trauma. In this study, the authors prepared hydrogel nanocomposites (HNCs) using three different nanoparticles, SiO₂, natural clinoptilolite (nC), and Ca²⁺-modified clinoptilolite (mC). Fast-swelling superabsorbent hydrogel was used as a matrix of NCs. The hydrogel and HNCs were characterized by FTIR, XRD, FE-SEM, and TGA. The hemocompatibility of HNCs was evaluated by hemolysis test and blood cells function. HNC formed a physical barrier by dehydrating the injury site and concentrating clotting factors. Additionally, highly charged nanoparticles, promoted local hemostasis by activating the intrinsic pathway of the blood coagulation cascade.     

Extractive oxidative desulfurization of model oil/crude oil using KSF montmorillonite-supported 12-tungstophosphoric acid

12-Tungstophosphoric acid(PW) supported on KSF montmorillonite, PW/KSF, was used as catalyst for deep oxidative desulfurization(ODS) of mixed thiophenic compounds in model oil and crude oil under mild conditions using hydrogen peroxide(H_2O_2) as an oxidizing agent. A one-factor-at-a-time method was applied for optimizing the parameters such as temperature, reaction time, amount of catalyst, type of extractant and oxidant-tosulfur compounds(S-compounds) molar ratio. The corresponding products can be easily removed from the model oil by using ethanol as the best extractant. The results showed high catalytic activity of PW/KSF in the oxidative removal of dibenzothiophene(DBT) and mixed thiophenic model oil under atmospheric pressure at 75 ℃ in a biphasic system. To investigate the oxidation and adsorption effects of crude oil composition on ODS, the effects of cyclohexene, 1,7-octadiene and o-xylene with different concentrations were studied.     

Nested and interleaved direct sequence spread spectrum to enhance CDMA security and bit error rate performance

Two new methods, the nested direct sequence spread spectrum and interleaved direct sequence spread spectrum, are introduced in view of the previously investigated spread spectrum methods. In the nested direct sequence method, the security is maintained, and the cross‐correlation between different codes resulting in multi‐user interference that corresponds to BER performance is improved, while in the interleaved direct sequence spread spectrum, the security is improved and BER performance is maintained. Both methods are analysed by mathematical relations as well as computer simulations and are compared with the existing methods. Copyright © 2016 John Wiley & Sons, Ltd.